Polpriklopnik kiper

WIELTON 3-Achskipper/Alu-Kastenmulde /51 cbm/ Kombitür /

Type:
External length: 11,106 mm
Internal floor length: 9,890 mm
External width: 2,550 mm
Internal height: 2,100 mm
Track width: 2,040 mm
Fifth wheel height: 1,200 mm
Wheelbase: 1,310 mm
Rear overhang: 1,418 mm
Floor height: 1,525 mm
Height at max. tipping angle: 10,064 mm
Max. cylinder tipping angle: 46°
Unladen weight: 6,100 kg
Volume: 50.8 cbm
Sliding tarpaulin 900g/m2
Water tank 30 l
Toolbox 165 l
Aluminum ladder 2,840 mm
Tension chain between side walls
Chassis frame Super Light, straight, longitudinal beams with recessed fifth wheel plate section
Welded construction, weight-optimized from high-strength S700 steel
Air suspension
Aluminum profile side underrun protection in accordance with ECE 73
2 wheel chocks (plastic)
Distance: kingpin – 2nd axle: 6,810 mm
Wheelbase: 1,310 mm
Steel underrun protection
Foldable rear underrun protection
Fifth wheel height unladen: 1,200 mm
Number of axles: 3
6x tyres 385/65/22.5 standard (Bridgestone/Hankook)
Without spare wheel rim
6x Alu wheels ABERG AluPro BRUSHED 22.5x11.75 ET-120
Rigid axles
No axle lift on 3rd axle
1st lift axle
SAF disc axles 3x 9,000 kg 22.5 INTRADISC CD
2-speed landing legs, full load (BPW Gen2 FL / SAF Hercules)
No spare wheel holder and spare wheel winch
Aluminum ladder L=2,840 mm
Toolbox - 165 L (mounted on chassis in the middle, left side)
Water tank - 30 L (mounted on chassis in the middle, left side)
Shovel and broom on chassis, above the mudguard
Extendable ladder at rear
Bulkhead inclined 20 degrees
Side walls SL, internal thickness 2.5 mm, fully welded
Internal height: 2,100 mm
Double-wing aluminum combination door, aluminum (1/2 + 1/2) vertical with portal beam
2 grain chutes
Tension locks at bottom - 2 pcs
Pallet-width execution
5 mm floor
Floor crossbeam distance under the floor: 360 mm
Trough damping PolyP
Tension chain between side walls
Control station mounted on bulkhead, access at front left
PVC sliding tarpaulin 680 g/m2 with quick release and aluminum winding tube, (for vertical rear closure with top triangle front and rear, central tube welded into tarpaulin)
Reinforced tarpaulin 900 g/m2
Brake system: Knorr IVL or Wabco, at manufacturer's discretion
Spring pressure gauge
Steel air tanks
Control line for lift axle from driver’s cab
Hydraulic connection kit 1"
Hydraulic cylinder, eye-mounting top

The system is designed for semi-trailers and trailers and is used to monitor the tyre pressure and temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tyre pressure and temperature) mounted on the rims and a device connected to the EBS. No tyre pressure sensor for spare wheel. Tipping angle indicator.

The manufacturer grants a 24-month warranty on the vehicle, subject to the legal requirements of the respective market.
The warranty is valid in accordance with the terms and conditions of sale and delivery and is subject to compliance with the maintenance intervals specified in the warranty booklet.
Warranty period for ON-ROAD / OFF-ROAD products:
- 24 months for the complete product from the date of initial registration
- 36 months for the vehicle frame from the date of initial registration (excluding surface rust)
Hnjdpfxey Sklbe Ag Ijl
- 10-year warranty against frame perforation (to be understood as rusting through from inside to outside)

Export license plates and insurance available at extra cost on request! For export transactions, we will carry out the export declaration and registration for you on request for a fee. For exports to non

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.