Odprta polprikolica s ponjavo

SCHWARZMÜLLER Plane S1 Mega Edscha Coilmulde Hubdach

Stanje: rabljeno, največja dovoljena obremenitev: 29.110 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 13.610 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.005 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Schwarzmüller Curtain Sider S1 Mega Edscha Coil Well, Lifting Roof Perm. total weight: 36,000 kg, Tare weight: 6,890 kg, Payload: 29,110 kg, Fifth wheel height unladen: approx. 960 mm, Loading height: approx. 1,040 mm, SAF axles, Air suspension, Disc brakes, Edscha sliding roof system, Lifting roof, Hydraulic lifting roof with 400 mm total lift, can be raised separately at 4 corner posts, Weld-on lashing tarp, sliding curtain right and left, Portal doors, Underrun protection right, left, and rear, 2x crank landing gear, Access ladder rear right, 3x storage boxes left, Rubber crash buffers, Multilock outer frame, 26 lashing rings per side (right and left), Gsdoy R Hh Nspfx Apbeit 2 lashing rings in front wall of load area, Customs cord, ABS, EBS, ALB, DIN EN 12642 Code XL, Wheelbase: approx. 6,450 + 1,310 + 1,310 mm, Loading area (LxWxH): approx. 13,610 x 2,480 x 3,005 mm, External dimensions (LxWxH): approx. 13,850 x 2,550 x 4,000 mm, Rear portal clearance height: 2,814 mm, Rear portal clearance width: 2,480 mm, Coil well dimensions (LxWxH): 7,400 x 1,160 x 300 mm, 15x coil well covers, 10x stanchion pockets in coil well, 6x stanchions in coil well, 1x spare wheel holder incl. spare wheel (trailer), 1x spare wheel holder incl. spare wheel (truck), Tyres: 435/50R19.5 on steel rims, Tread depth tyres left front: 6 mm, Tread depth tyres left middle: 4 mm, Tread depth tyres left rear: 6 mm, Tread depth tyres right front: 6 mm, Tread depth tyres right middle: 4 mm, Tread depth tyres right rear: 6 mm, Further equipment: 3-axle ultralight high-volume sliding curtain platform semi-trailer RH80 - Coil, Internal length approx. 13,610 mm, Internal width approx. 2,480 mm, Rear loading width approx. 2,480 mm, Internal loading height front approx. 2,945 mm / 3,005 mm (height adjustable), Internal loading height rear approx. 2,945 mm / 3,005 mm (height adjustable), Internal loading height 1x 60 mm adjustable, Rear loading height approx. 2,760 mm, Fifth wheel height approx. 960 mm, Front loading height approx. 1,040 mm, Rear loading height approx. 1,040 mm, Trailer level at approx. 960 mm, Interchangeable 2" kingpin, Frame for fifth wheel height unladen approx. 960 mm - 1,050 mm (with air-suspension tractor), Perforated external frame with hole spacing approx. 100 mm, slot 40/25 mm as per DIN EN 12640, starting approx. 3,000 mm from front wall, 21 pairs of recessed 2.5 t lashing shackles and 5 pairs of 4 t lashing shackles in coil well area on outer frame, Coil well with usable length approx. 7,400 mm, Standard finish according to VDI 2700 for coil diameters 900 up to max. 2,100 mm, Lined on both sides with 24 mm phenolic resin-coated plywood, Reinforced cover made of 27 mm phenolic resin-coated plywood with triple wooden supports, forklift-accessible, 5 pairs stanchion housings in coil well for 80x80 mm box stanchions; distribution: 1x front, 1x approx. 1,840 mm (before center of gravity), 1x 2,520 mm, 1x 3,680 mm, 1x 5,330 mm, 2 mechanical steel landing legs, 12 t each, single-side operation right, force equalization, SAF-Intradisc-B9 axles, Axle distance 1,310 + 1,310 mm, Wheelbase 7,650 mm, Brake system manufacturer: Wabco, Aluminium air tanks, Air suspension with lifting and lowering device, special total lift ca. 250 mm, Axle load display via EBS CAN bus signal, Floor bearing capacity 5,460 kg forklift axle load in accordance with CSC, Front wall reinforced with 2 center posts, Tarp bar at front corner posts with tension lever, tarp can also be opened from the front,