Odprta polprikolica s ponjavo

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, first axle lift, elevating roof, Vario Loch-FIX chassis, BPW axles, pallet stops left and right, sliding side curtain, sliding roof tarpaulin, toolbox, single owner, as new condition.

Permissible kingpin load: 12,000 kg
Technically possible kingpin load: approx. 12,000 kg
Permissible axle load: 24,000 kg (8,000 kg per axle)
Technically possible axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Own weight, standard configuration: approx. 6,130 kg
Own weight, customized vehicle build: approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load according to DIN EN 283, test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading length (internal): approx. 13,620 mm
(G) Loading width (internal): approx. 2,480 mm
(G2) Rear clear loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen, in driving position (horizontal): approx. 1,020 mm
(H2) Loading height laden, in driving position (horizontal): approx. 990 mm
(H3) Achievable ramp height at rear with kingpin height 910 mm, laden, raised: approx. 1,200 mm
Ride height set to 265 mm.
(K) Side clear loading height, internal: front approx. 2,735 mm - 2,860 mm (5 x 25 mm adjustable), rear approx. 2,810 - 2,860 mm (1 x 50 mm adjustable)
(K1) Internal height under roof: front approx. 2,875 mm - 3,000 mm (5 x 25 mm adjustable), rear approx. 2,950 mm - 3,000 mm (1 x 50 mm adjustable)
(X1) Overall height unladen, in driving position (horizontal): = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Overall height laden, in driving position (horizontal): = H2 + K + T +/- body height adjustment
Body settings: The design of the "Mega" superstructure allows height adjustment of 5 x 25 mm at the front and 1 x 50 mm at the rear. Relevant heights (overall height, side loading height, internal height) change depending on the body setting selected.

(T) Roof structure height at sides: approx. 180 mm. Due to the roof brace design, the internal pallet width under the roof matches the specified internal height under roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
Ppsdpfxey Ifw De Anmsr
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Body height above fifth wheel: approx. 90 mm
(S) Fifth wheel height unladen possible: approx. 930 - 1,060 mm, level at approx. 930 mm (please note overall height!)
Brake system compliant with ECE-R13
Electrical system compliant with ECE-R48
Wabco brakes, air suspension
BPW three-axle module ECO Air with disc brakes Ø 370 mm, ET 120, air suspension 260 mm stroke.
6 x 445/45 R 19.5 tires
Steel pallet stops with VarioFix hole matrix (bolted), left and right in driving direction
VarioFix outer steel frame with 3 pairs of stanchion pockets
Mechanical/hydraulic lifting device, lifting height from lowest position approx. 500 mm/600 mm, 4 control levers each at the corner stanchions. Complies with occupational safety directive BGV D 29. (Lifting roof can only be operated with doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only.
Daimler load securing certificate DL 9.5
Chassis, frame, and basic equipment components made of metal, corrosio

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.