Polpriklopnik kiper

FLIEGL 3-Achs Sattelkipper Alu DHKA 390 - 50m³

The images are archive photos. The vehicle may still be in use.

Chassis Tipping Semi-Trailer
Fine-grained steel welded construction, lightweight basic design, fifth wheel plate with replaceable 2" kingpin
Patented curved front wall
24 t, 2-speed landing gear, single-sided operation, straight base, without compensating device
Foldable underrun protection

Axles and Suspension
3x BPW disc brake axles with 430 mm disc diameter
"Axle/chassis laser alignment" to reduce tire wear and fuel consumption
Air suspension
1st axle automatic lift axle, including forced lowering and traction aid, operated via "3x brake" function (traction aid operable up to a 30% axle load exceedance and up to a max. speed of 25 km/h)
"Hot-dip galvanized lift axle mechanism"

Braking System
2-line compressed air brake system
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
EBS (Electronic Braking System) with EBS socket at the front, without connecting cable
Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS!
With lifting & lowering valve
Vehicle stability control system

Wheels and Tires
6x 385/65 R22.5" tires
6x steel rims

Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 x 7-pin non-interchangeable sockets at the front, without connecting cable, electrical system not fully functional.

Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed section, NW 48 mm. (without hose connection)
Codpfx Ajy Edtfsm Sjrc

Body
Aluminum box body made of high-quality, abrasion-resistant material.
Inclined front wall, 5 mm thick, with external cylinder mounting.
Side walls made of 30 mm hollow chamber profiles, neatly welded, with top rail profile for preventing bulk material accumulation. Interior with access steps on front wall (not compatible with Cramaro).
Shovel and broom holder externally on front wall.
Greenline - conical and aerodynamic body shape
"Membrane" - tailgate
Tailgate mounted on oscillating hinges with "double joint hinge" and 2-wing split (1/2 to 1/2), top with swing bracket, one grain chute per door.
Floor continuous, 6 mm thick
Standing platform with access, mounting plate for air/electrics and brake with large clearance for optimal operability.
Roll tarp stows to right side (FR-right), with central locking on FR-left

Operating Instructions
For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material ingress and corrosion.
The stated gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads.
Note! Not suitable for chemically aggressive media (e.g., acids, chlorine compounds, sulfur compounds, "alternative fuels"); such media can cause stress corrosion cracking and severe cracking of the body if combined with a moist surface!
Vehicles with loading bodies are intended for non-chemically aggressive cargo. Use for transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and domestic waste is at the user's own risk. This may cause damage due to stress corrosion cracking or pitting.

The images are archive photos. The vehicle may still be in use.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.