Kiper tovornjakUNSINN
UHK 2715-15-13 Rückwärtskipper
Kiper tovornjak
UNSINN
UHK 2715-15-13 Rückwärtskipper
EXW Fiksna cena plus DDV
3.436 €
(4.089 € bruto)
Stanje
Novo
Lokacija
Horn-Bad Meinberg 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
EXW Fiksna cena plus DDV
3.436 €
(4.089 € bruto)
- Lokacija:
- Stahler Weg 3, 32805 Horn-Bad Meinberg, DE

Pokliči
Podrobnosti ponudbe
- ID oglasa:
- A217-26-433
- Referenčna številka:
- 9935512
- Posodobitev:
- nazadnje dne 16.04.2026
Opis
Rear tipper with electric pump & cordless screwdriver pump
Manufacturer: Unsinn
Model: UHK 2715-15-13
Internal dimensions: 2760 x 1500 x 300 mm (L x W x H)
Permissible total weight: 1500 kg
Unladen weight: approx. 450 kg
Payload: approx. 1050 kg (payload information may vary depending on the equipment and configuration)
Electrohydraulic pump with emergency "Pumpless" manual function, allows tipping via cordless screwdriver in case of low battery
Integrated battery charger with 230 V plug
Battery and pump unit securely and dirt-protected stored in a battery box
Shock absorbers, approved for 100km/h
Integrated ramp compartment with tensioning device and folding license plate holder for stowing loading ramps under the bed (for easy retrofitting of loading ramps)
Unique, torsionally rigid longitudinal chassis for safe driving characteristics and high stability
Enclosed, fully welded and hot-dip galvanized steel frame profile
Full-length, heavy-duty steel floor across the entire vehicle width
Maintenance support for securing the tipped body
Reinforced automatic jockey wheel
Maneuvering handle with practical ratchet strap winder for easy handling
Load securing system for increased flexibility and efficiency, DEKRA-certified
8 recessed lashing points integrated in the steel floor
Lashing points on and below the bed, each rated up to 1000 kg and 360° rotatable
Side walls fully foldable and removable
Tailgate with fold-down steel panel, including slip protection for loading ramps
Robust cam lock closures on side panels
4 removable steel corner posts
Lighting with 13-pin connector and reversing light
Including vehicle documents
Hedpfey Dbibex Adyjff
Available options and accessories for this trailer:
Whether mesh extension, steel extension or drop side extension – choose the right version and customize your set-up individually.
Thanks to the clever KOMBILINE system, extensions can be easily combined. For example, a mesh extension at the front and rear can be perfectly matched with steel or side wall extensions on the sides – with no additional effort.
Loading ramps
Drawbar cover
Load securing net
Supports
Anti-theft device
Registration of your new trailer at the vehicle registration office
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Manufacturer: Unsinn
Model: UHK 2715-15-13
Internal dimensions: 2760 x 1500 x 300 mm (L x W x H)
Permissible total weight: 1500 kg
Unladen weight: approx. 450 kg
Payload: approx. 1050 kg (payload information may vary depending on the equipment and configuration)
Electrohydraulic pump with emergency "Pumpless" manual function, allows tipping via cordless screwdriver in case of low battery
Integrated battery charger with 230 V plug
Battery and pump unit securely and dirt-protected stored in a battery box
Shock absorbers, approved for 100km/h
Integrated ramp compartment with tensioning device and folding license plate holder for stowing loading ramps under the bed (for easy retrofitting of loading ramps)
Unique, torsionally rigid longitudinal chassis for safe driving characteristics and high stability
Enclosed, fully welded and hot-dip galvanized steel frame profile
Full-length, heavy-duty steel floor across the entire vehicle width
Maintenance support for securing the tipped body
Reinforced automatic jockey wheel
Maneuvering handle with practical ratchet strap winder for easy handling
Load securing system for increased flexibility and efficiency, DEKRA-certified
8 recessed lashing points integrated in the steel floor
Lashing points on and below the bed, each rated up to 1000 kg and 360° rotatable
Side walls fully foldable and removable
Tailgate with fold-down steel panel, including slip protection for loading ramps
Robust cam lock closures on side panels
4 removable steel corner posts
Lighting with 13-pin connector and reversing light
Including vehicle documents
Hedpfey Dbibex Adyjff
Available options and accessories for this trailer:
Whether mesh extension, steel extension or drop side extension – choose the right version and customize your set-up individually.
Thanks to the clever KOMBILINE system, extensions can be easily combined. For example, a mesh extension at the front and rear can be perfectly matched with steel or side wall extensions on the sides – with no additional effort.
Loading ramps
Drawbar cover
Load securing net
Supports
Anti-theft device
Registration of your new trailer at the vehicle registration office
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Pošlji povpraševanje
Telefon & Faks
+49 5234 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake





























































