Tovornjak s ploščadjo

VOLVO FM12 8x4BB KIPPER KRAN PK33000ELB Fly-Jib WINDE

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: > 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm Njdpfji Ai E Rox Akxslh - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm Njdpfx Aev Sw E Ajkxslh * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge

Stanje: rabljeno, prevoženi kilometri: 169.000 km, moč: 315 kW (428,28 KM), prva registracija: 04/2017, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 5.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, žerjav, Int-št.: 219 zelo dobro vzdrževan VOLVO FMX 420 6x6 z močnim žeravom HIAB * VOLVO Nsdpfsz Nugysx Akxolh * FMX * 6x6, štirikolesni pogon * Zaklopne diferenciali * Vzmetenje s pomočjo listnih vzmeti in zračnih blazin * Dovoljena skupna masa 26.000 kg (tehnično 35.000 kg) * Trestno korito, zasnovano kot korito za prevoz kamna, iz materiala Hardox * Stranska zaščita (Bordmatik) na levi strani * ŽERAV HIAB 232-E5 HiPRO * DALJINSKI UPRAVLJALNIK ZA ŽERAV * 5x hidravlični podaljšek + 1x ročni * 2x popolnoma hidravlični oporniki * Višina kavlja pribl. 21 m * Bočni doseg glejte na grafikon obremenitve * VITEL * Osrednje zaklepanje * 2 sedeža * Radio * KLIMA * Odlično stanje * Prvi lastnik * DAVČNA ŠTEVILKA NA VOLJO!!! Možnost odkupa vašega vozila Financiranje od 4,99 % Pridržujemo si pravico do sprememb in napak! Podatki v tej oglasni objavi so zgolj informativni in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti za tiskarske in prenosne napake. Navedeno dodatno opremo je treba preveriti. Vsi podatki v oglasih so nezavezujoči! Dostava po celotni državi na zahtevo Odpiralni čas: od ponedeljka do četrtka od 9.00 do 17.00 Petek od 9.00 do 14.00 in po dogovoru!!!

Stanje: rabljeno, prevoženi kilometri: 169.000 km, moč: 315 kW (428,28 KM), prva registracija: 04/2017, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: modra, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 5.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, žerjav, Št. ponudbe: 219 Nlsdpfx Akoz Nugmsxoh zelo dobro vzdrževan VOLVO FMX 420 6x6 z močno žerjavom HIAB * VOLVO * FMX * 6x6, štirikolesni pogon * Zaklep diferenciala * Vzmetenje s pomočjo listnih vzmeti in zračnih blazin * Dovoljena masa 26.000 kg (tehnično 35.000 kg) * Trestno vozilo s tremi stranicami, zasnovano za prevoz kamna, iz materiala Hardox * Stranska zaščita * ŽERJAV HIAB 232-E5 HiPRO * DALJINSKI UPRAVLJALNIK ZA ŽERJAV * 5x hidravlični podaljšek + 1x ročni * 2x popolnoma hidravlični oporni nogi * Višina kljuke približno 21 m * Stranski doseg glejte na diagram obremenitve * VRVIČNI VITEL * Centralno zaklepanje * 2 sedeža * Radio * KLIMA * Odlično stanje * 1. lastnik * Možnost izkazovanja DDV!!! Možnost odkupa vašega vozila Financiranje od 4,99 % Pridržujemo si pravico do spremembe cen in napak! Podatki v tej oglasu so opisni in niso zavezujoči. Prodajalec ne prevzema odgovornosti za tiskarske in prenosne napake. Izpostavljena oprema je treba preveriti ločeno. Vsi podatki v oglasih niso zavezujoči! Dostava po celotni državi na zahtevo Delovni čas: od ponedeljka do četrtka od 9.00 do 17.00 Petek od 9.00 do 14.00 in po dogovoru!!!

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/2003, skupna dolžina: 9.060 mm, skupna širina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 7.450 mm, Leto izdelave: 2003, Oprema: ABS, = Additional Options and Equipment = - ADR - EBS - Lift axle Nodpfx Asy H Hdpjkxolh - Alloy wheels - Air suspension - Disc brakes = Remarks = Attractive and fully functional Van Hool 20FT tipping chassis (year of manufacture: 2003) with ABS/EBS, SAF axles equipped with disc brakes (Intradisc), 2 lift axles, ADR approval (EXII, EXIII, FL, AT), tipping capability with 24V connection up to 20° tilt angle, unladen weight: 5,300 kg, gross vehicle weight: 39,000 kg, tires: 385/65-R22.5 (tread left: 4/11/12 mm; tread right: 9/11/9 mm), Dutch registration. = Additional Information = Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 9,000 kg; tire tread left: 25%; tire tread right: 55% Rear axle 2: Alloy wheels; lift axle; max. axle load: 9,000 kg; tire tread left: 70%; tire tread right: 70% Rear axle 3: Alloy wheels; max. axle load: 9,000 kg; tire tread left: 75%; tire tread right: 55% Weights Unladen weight: 5,300 kg Payload: 33,700 kg gross vehicle weight: 39,000 kg Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-91-FS Further Information Please contact Arne Honingh for more information.

Stanje: rabljeno, = Dodatne možnosti in dodatna oprema = - Daljinsko upravljanje (daljinsko upravljanje za pritrditev žerjava) = Opombe = Dodatne informacije: Manjka ena oporna noga. Doseg: 15,0 m Segmenti stebra: 5 Maksimalna nosilnost na koncu iztegnjenega stebra: 1120 kg = Dodatne informacije = Novo: Ne Leto izdelave: 2017 Področje uporabe: Tovorni transport Nosilnost: 5.500 kg Nledpe Aa Nipsfx Akxjh Višina dviga: 1.700 cm Serijska številka: BL232HP00241 Za dodatne informacije se obrnite na Denissa Hmeljova, Denissa Urmakerja ali Alejandra Goyenecheja.