Polpriklopnik z nizkim ležiščem za prevoz gradbenih strojev

Faymonville 4-(1+3)-A-Tele-Semi-Radm.-Rampen-Gummib.

Gooseneck:
- Gooseneck in SNT design for optimized loading area length, approx. 3,700 mm long
- Rear of the gooseneck with beveled edge, approx. 1,000 mm x 10°
- Suitable for tractor units: 6x2, 6x4, 8x4 short

Loading Platform:
- Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10°
- One recess in the loading platform and the bevel area for accommodating the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm

Two-Part Steel Ramps:
- One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide
- Ramps with rubber covering
- Hydraulically folding ramp tips
- Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward
- "Super Grip" rubber floor 25 mm and sheet metal floor approx. 5 mm as additional reinforcement on the beveled section of the loading platform
- Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp

Axles, Suspension, and Tires:
- BPW axles and suspension, 1st axle steered at front, all other axles with hydromechanical forced steering
- Technical axle load: 12,000 kg
- 1st axle with electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Tires 235/75 R 17.5
- TPMS tire pressure monitoring system

Included Accessories:
- Front wall made of steel, detachable, approx. 400 mm high
- Yellow-red air couplings on the front connection strip
- 3kW electro-hydraulic unit for controlling hydraulic operations
- 1 spare wheel
- Outer support on gooseneck with mounting holes for screwable lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included
- 1 pair of horizontal lashing rings at the rear of the gooseneck
- On the gooseneck, 1 pair of detachable ALU side walls, approx. 400 mm high, anodized
- On the gooseneck, 1 detachable ALU rear wall, approx. 400 mm high, anodized
- Over the gooseneck, approx. 40 mm thick hardwood floor, over king pin area checker plate
- 2" king pin
- Round NATO socket on the front connection strip
- 4 wheel chocks
- Mechanical landing legs
- Continuous hardwood flooring approx. 50 mm thick on the platform and interrupted between the axles
- Locking of the loading platform with conically welded locking profiles every 250 mm
Lhsdpfxoywizfo Ab Hsd
- Pre-tension sheet included
- 1 intermediate table, approx. 300 mm wide
- 1 pair of lashing rings on the front cross member
- 8 pairs of recessed folding lashing rings in the outer frame of the loading platform
- Extendable (galvanized) extensions approx. 230 mm per side
- Wheel recesses with square climbing strips, 15 x 15 mm, open in front of the axles up to the gooseneck cross member, approx. 700 x 410 mm
- Lockable aluminum elements on the pull-out tubes of the extensions
- Widenable U-profiles for the insertion of ALU covers
- Wheel recesses with square climbing strips, 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm
- ALU covers for the wheel recesses
- Lockable aluminum elements on the pull-out tubes of the extensions
- 1 pair of mechanical rear supports
- Radio and cable remote control
- Lifting axle on the front axle
- Square climbing strips 20 x 30 mm
- Central lubrication system
- Wabco Smart Board System
- 4 warning panels, approx. 423 x 423 mm, extendable

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.