Priklopnik sedeža z delovno ploščadjo

KÖGEL 3-Achs MEGA Sattelanhänger

Extract of equipment

Frame
10110.190 Regular ladder-type steel lightweight frame with inserted crossmembers.
10115.010 With cambered chassis frame (recommended for the following applications: platform body, open body, and subsequent installation of a tarpaulin body)
10140.010 Protective plate between outer frame and longitudinal member as tire protection for the drive axles of the tractor unit.
10300.108 Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337

Chassis
I 17140.020 Axle lift for 1st axle, without start-assist, fully automatic control, axle-load-dependent, with selectable lowering of the lift axle in any load condition.
18330.251 Three-axle SAF INTRADISC module with disc brakes Ø 370 mm, ET 120. Air suspension with approx. 260 mm travel.

Vehicle Tyres
20540.540 6 x 445/45 R 19.5, 160J tyres
20865.160 6 steel rims 19.5 x 14.00, offset approx. 120 mm (ET 120)

Attachments - Chassis
20110.010 Landing legs (brand at Kögel's discretion) mechanical, with compensating foot, 24 t lifting capacity. Single-sided operation on the right when facing the direction of travel.
22070.015 Side guard according to ECE-R73
I 25105.026 Spare wheel holder with winch incl. 1 wheel fixing kit, mounted in front of the axle module
I 25470.062 2 holders for 8 square tube stakes each, measurements inside length approx. 340 x 220 x 2,150 mm. Installed behind the axle module.
I 25620.011 Plastic, waterproof toolbox, internal dimensions approx. 545 x 400 x 400 mm. Installed rear left in the direction of travel.
27510.015 Rigid rear underrun protection made of steel according to ECE-R58

Brake/Air Suspension System
32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic couplings, as well as external EBS diagnostic socket via ISO 7638 connector.
Itodoyvxazspfx Ab Hjd
33420.040 Air suspension incl. 1 raise/lower valve, installed rear left in the direction of travel behind the axle module. Driving position adjusts automatically.
34320.001 2 non-interchangeable coupling heads at the front ISO 1728
34410.010 Air reservoir for brake system and air supply, steel (EN 286-2)

Floor
40510.120 Wooden planked floor approx. 30 mm thick, bonded plywood
I 40513.020 Floor sealed all the way around
I 40541.080 8 rows of stake pocket strips for square tube stakes approx. 80 x 80 mm, arranged transverse to the direction of travel (1 row consists of 1 section with 5 pockets between outer frame and longitudinal member and 1 section with 10 pieces between the longitudinal members). Layout according to Kögel standard drawing.

Front Wall
I 41710.018 Front wall approx. 1,800 mm high with aluminum volume corner posts, riveted with aluminum hollow profiles, bolted/riveted to the frame. 2 pairs of lashing rings (permissible lashing force 1,000 kg each) on the inside front wall according to EN 12640.

Rear Wall
I 42500.060 Folding rear wall approx. 600 mm made from aluminum hollow profiles with 3 tie rods and T-bolt locks, 2 folding steps on the inside
I 42540.030 Bolted steel corner posts at rear in drop side height

Side Wall
I 43505.130 3 pairs of drop-in stakes at drop side height
43540.208 VarioFix steel punched outer frame
I 43542.010 The VarioFix steel punched outer frame cannot be used for lashing due to other attachments.
I 43545.130 3 pairs of stake holders for drop-in stakes

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.