Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis. verstärkt, Rungen

Extract – Equipment Details

Frame
- 10110.122: Standard ladder-type frame in lightweight steel construction with through-bolted crossmembers.
- 10115.010: With pre-cambering of chassis frame.
- 10300.108: Coupling plate approx. 8 mm thick, with a 2" king pin according to DIN 74080 / ISO 337.

Running Gear
- I 17160.010: Axle lift mechanism on axle 1.
- I 17165.103: Full automatic, load-dependent axle lift control. Start-assist: Activation via 3x brake pedal, 30% overload allowance up to 25 km/h.
- 18330.700: Kögel brand of choice – three-axle module with disc brakes (approx. 430 mm diameter), offset approx. 120 mm. Air suspension with approx. 180 mm stroke.

Tires
- L 20520.010: Wheels with internal sensors according to UN ECE R141.
- I 20540.037: 6x 385/65 R22.5 BRIDGESTONE R179 XM 160 K (158 L) tires.
- 20865.005: 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120).

Chassis Attachments
- 20110.010: Landing legs (manufacturer Kögel of choice), mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on right when facing direction of travel.
- I 21070.117: Spray suppression system to EU Regulation (EU) No. 109/2011 for three-axle assemblies with 385/65 R22.5 tires: 1 pair quarter-round mudguards in front of axles, 1 pair straight mudguards with spray flaps between 1st and 2nd axle, and 1 pair quarter-round mudguards with spray flaps behind axles.
- 21300.001: 2 wheel chocks with holders.
- 22070.013: Side underrun protection according to ECE-R73.
- I 25620.101: 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm, mounted at rear, one left and one right.
- 26110.015: Rear right retractable access ladder.
- 27510.010: High, rigid rear underrun protection, steel, per ECE-R58.
- I 71800.020: One pair of extendable warning panels for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection. Fitted at front and rear.
Itodpfjyvnd Aox Ab Hsd

Brake / Air Suspension System
- 32110.057: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug ISO 7638 (no connecting lines), parking brake as spring-loaded brake, external pneumatic and EBS diagnostic connectors via ISO 7638 socket.
- 32125.010: EBS system (Kögel brand of choice).
- 33420.040: Air suspension system incl. 1 raise/lower valve, mounted left behind the axle group, ride height is set automatically.
- 34320.001: 2 non-interchangeable coupling heads at front to ISO 1728.
- 34410.010: Steel air tank (EN 286-2) for brake system and air supply.

Floor
- 40510.120: Panel floor approx. 30 mm thick.
- I 40513.020: Floor fully sealed around.
- I 40542.023: Stake pockets for square tube stakes approx. 80 x 80 mm.

Front wall
- I 40532.220: Storage for up to 20 square tube stakes approx. 80 x 80 mm (approx. 1,990 mm long) inside front wall.
- I 41710.201: Front wall approx. 2,000 mm high with high-volume corner posts, steel, with profiled steel sheet, bolted/riveted to frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on front wall to EN 12640.

Side wall
- 43540.380: VarioFix external steel lashing frame.
- I 43560.211: 21 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile force approx. 5,000 kg per ring.

Bumper protection
- 42551.015: 1 pair steel bumper blocks approx. 160x85x85 mm mounted at rear frame end.
- I 42552.020: Galvanized transverse steel angle as bumper...

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.