Odprta polprikolica s ponjavo

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, lift axle (1st axle lift), lifting roof, Vario Fix hole pattern frame, BPW axles, pallet stop strips left and right, sliding side curtain, sliding roof tarpaulin, toolbox, single owner, as new.

Permissible fifth wheel load: 12,000 kg
Technically possible fifth wheel load: approx. 12,000 kg
Permissible aggregate load: 24,000 kg (8,000 kg per axle)
Technically possible aggregate load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Unladen weight, standard equipment: approx. 6,130 kg
Unladen weight, as equipped: approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load capacity (DIN EN 283, tested axle load 7,200 kg)
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
Hnodpfx Asyuzvbjb Hoi
(E) Overall width: approx. 2,550 mm
(F) Loading area length (internal): approx. 13,620 mm
(G) Loading area width (internal): approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tyre size: 445/45R19.5
(H1) Loading height unladen (level): approx. 1,020 mm
(H2) Loading height laden (level): approx. 990 mm
(H3) Attainable dock height at the rear with coupling height of 910 mm, loaded and raised: approx. 1,200 mm
Ride height set at 265 mm
(K) Side through-loading height (internal): front approx. 2,735 mm - 2,860 mm [adjustable in 5x25 mm steps]; rear approx. 2,810 mm - 2,860 mm [adjustable in 1x50 mm step]
(K1) Internal height under roof: front approx. 2,875 mm - 3,000 mm [adjustable in 5x25 mm steps]; rear approx. 2,950 mm - 3,000 mm [adjustable in 1x50 mm step]
(X1) Overall height unladen (level): = H1 + K + T +/- body-height adjustment | = S + P + K + T +/- body-height adjustment
(X2) Overall height laden (level): = H2 + K + T +/- body-height adjustment
Superstructure adjustment: The design of the "Mega" body allows for height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, side through-loading height, internal height) correspondingly change with the selected body setting.

(T) Roof side structure height: approx. 180 mm. Due to the design of the roof rail, the internal height for pallet loading matches the specified internal roof height.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing-out radius (according to ISO 1726): approx. 2,300 mm
(P) Build-up height above fifth wheel: approx. 90 mm
(S) Possible fifth wheel height unladen: approx. 930 – 1,060 mm, level at approx. 930 mm (Observe overall height!)
Brake system to ECE-R13
Electrical system to ECE-R48
Wabco brakes, air suspension
BPW triple-axle module ECO Air with disc brakes Ø 370 mm, ET 120, air suspension 260 mm lift.
Tyres: 6 x 445/45 R 19.5
Pallet stop strips of steel with VarioFix hole pattern (bolted), left and right in direction of travel
Vario Fix steel outside frame with 3 pairs of pillar sockets
Mechanical/hydraulic lifting system, lift height from lowest position approx. 500 mm/600 mm, 4 control levers at each corner post. Compliant with occupational safety regulations (BGV D 29). (Lifting roof can only be operated with doors open!)
Load securing certificate to EN 12642 XL (VDI 2700). Road transport only.
Daimler load securing certificate DL 9.5.
Frame, chassis, and basic equipment attachments corrosion-protected with KÖGEL KTL system (nano ceramic and KTL

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.