Priklopnik z menjalnim šasijem

KÖGEL AW 18- 22,5"*SAF Achsen*Neuwertig

Location:
Hertle Spedition
Munninger Str 10
86732 Oettingen

VIN: WK0A0001800293377

Technical Specifications
Axle load: 9,000 kg
Permissible gross weight: 18,000 kg
Technically possible gross weight: approx. 18,000 kg
Unladen weight (basic configuration): approx. 2,550 kg
Unladen weight (individual vehicle configuration): approx. 2,580 kg
Theoretical payload: approx. 15,420 kg
(A) Wheelbase: approx. 5,040 mm
(D) Overall length: approx. 9,160 mm
(E) Overall width: approx. 2,550 mm
(M) Distance between locking points: approx. 5,853 mm
(H5) Loading height unladen (driving position): approx. 1,255 mm
(H4) Loading height unladen (lowered): approx. 1,190 mm
Fpedpfx Aeytl Ulod Hed
(H5) Loading height laden (driving position): approx. 1,225 mm
(H6) Loading height laden (raised): minimum approx. 1,380 mm
Driving height set to 450 mm.
Suitable for transporting standard swap bodies according to EN 284, sizes C715 and C745.
Suitable for transporting standard containers according to ISO 668/1496, size 20'. Due to the
arrangement of the underrun protection to EC standard, it cannot be loaded flush at the rear!
(N2) Front stop to center of lock: approx. 650 and 800 mm
(O2) Distance from center of towing eye to front edge of swap body C745: approx. 1,940 mm
(Y) Towing arm height unladen, horizontal: approx. 905 mm
Towing arm pivot range at 3° in driving mode: approx. +/- 130 mm, maximum towing arm pivot range: approx. +/- 400 mm
(Q) Distance from axle center to towing arm bearing center: approx. 860 mm
Brake system according to ECE-R13
Electrical system according to ECE-R48
Steel lightweight frame. Standard front stop foldable and repositionable. Locking via 4 container locks (twist-locks) mounted on container beams as per DIN EN 284. Bogie with ball race ring (diameter approx. 1,300 mm).
Front centering by guide rollers (Ø approx. 100 mm)
Rear centering by guide rollers (Ø approx. 100 mm)
Chassis
SAF INTRADISC axles with disc brakes, diameter 430 mm, ET 120. Air suspension with 220 mm stroke.
Vehicle Tire Equipment
Tyres 4x 385/65 R 22.5 160J (brand as chosen by Kögel)
4 steel rims 22.5 x 11.75, inset depth 120 mm (ET 120).
Chassis Attachments
Spray guard system (spray suppression) according to Regulation (EU) No. 109/2011 for 2-axle trailers, comprising 1 pair of quarter circle mudguards in front of the front axle, 1 pair of quarter circle mudguards with splash flaps behind the front axle, and 1 pair of half circle mudguards with splash flaps on the rear axle.
1 wheel chock with bracket
Side underrun protection according to ECE-R73.
Drawbar with adjustable height device, type-approved, with towing eye Ø approx. 40 mm according to DIN 74054, [L]
Drawbar length: approx. 2,250 mm. The clearance of the drawbar on the truck must be checked by the operator!
High, rigid rear underrun guard made of steel according to ECE-R58
Height of underrun guard profile min. 120 mm, designed for increased test forces.
Brake / Air Suspension System
EBS system 4S/3M (EBS-E-PREMIUM), with stability program, EBS connector ISO 7638 with connection lines, parking brake as spring-loaded brake.
Air suspension system incl. 2 lift and lower valves, 1 valve acting on each of the front and rear axles. Positioning between front and rear axles.
2 non-interchangeable coupling heads front ISO 1728
Air tanks for brake system and air supply made of steel (EN 286-2).
Bumper Protection
1 pair of rubber buffer stops 200x150x120 mm mounted at the end of the frame
Tyres
Axle Position Dimension Rim Tread de

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.