Priklopnik z menjalnim šasijem

WIELTON BDF 2-Achs-Wechselfahrgestell 1120-1320

BDF 2-Axle Swap Body Chassis 1120-1320

Dimensions and Weights
Twist-lock spacing - width: 2259 mm
Twist-lock spacing - length: 5853 mm
Wheelbase: 1420 mm
Drop-off height: 1120-1320 mm
Special lift: 450 mm
Driving height approx. 1110 mm
Tires: 385/55R22.5
Drawbar eye height: 400 mm
Gross weight: 18,000 kg
Manufactured according to EN 284 for C745/C782
Unladen weight: 3270 kg

TECHNICAL DATA
Chassis
Rubber-steel buffer at rear
Guide rollers - 2 pairs
Bolted drawbar without longitudinal adjustment
Side underrun protection made of steel, Wielton design
Frame made from high-strength S700 steel, hot-dip galvanized.
Container supports with individual twist locks for securing the swap body.
Wheelbase: 1420 mm
Drawbar eye Ø50mm, height adjustable
Steel underrun protection, galvanized
Adjustable front bumper, suitable for C745/C782 bodies
Steel lamp bracket

Axles and Suspension
Number of axles: 2
BPW axles 2x9000 kg 22.5 with disc brakes.
Large air suspension stroke (450 mm).

Support Legs
2 SAF steel crank support legs at the front
2 SAF steel crank support legs at the rear

Codpjyrwk Nofx Abvepw
Mudguards
Single wheel mudguards made of plastic

Rims
4x steel rim 22.5-11.75 ET-120

Tires
4x Hankook 385-55-22.5 tires

Other Chassis Equipment
Marking plates according to ECE
Chocks with handles, installed
Two toolboxes (145 l Aberg), located on both sides in front of the axles

Brake System / Pneumatics
Brake system: Wabco with basic modulator with RSS/RSP
Steel air tanks
Duomatic coupling
HS valve, installed in front of the axles on the left side (driver’s side)

Chassis Paintwork
Frame hot-dip galvanized
Frame hot-dip galvanized - no painting

Electrics
Lighting: Partial-LED Aspöck EUROPOINT III
Hybrid lamp version (LED + bulbs)
Position lights in LED technology
Other functions via bulbs
Connection lines - pivoting arm on the right side (passenger side)
Electrical connectors: 15-pin and EBS. The system complies with ADR requirements
LED work lights controlled by a switch on the HS console: 5 pcs.
Rear LED lights: 2 pcs., both sides, behind the axles
Front LED lights: 2 pcs., both sides, in front of the axles
Centrally mounted LED light: 1 pc., in front of the rear container carrier

Additional Systems
The system is developed for semi-trailers and trailers and is used for monitoring tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of rim-mounted TPMS sensors (tire pressure and temperature) and a device connected to the EBS.
Suspension relief system (Bounce Control)

Marking
Partial contour markings with Wielton logo
Partial contour marking on the sides - white
Partial contour marking at the rear - red

Warranty
The manufacturer provides a 24-month warranty on the vehicle, subject to the legal provisions of the respective market. The warranty applies according to the sales and delivery conditions and requires compliance with the maintenance intervals specified in the warranty booklet.
Warranty period for ON-ROAD/OFF-ROAD products:
- 24 months for the complete product from the date of initial registration
- 36 months for the vehicle frame from the date of initial registration (excluding surface rust)
- 10 years warranty against chassis rust-through (understood as rust forming from the inside out)
Warranty: 24 months from registration, except for wear parts, subject to a technical inspection after 12 months. Warranty for individual axle components will be given according to the respective axle manufacturers’ terms.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.