Silos polpriklopnik

KÄSSBOHRER SSK 40 - 60

Stanje: novo, prostornina tovornega prostora: 60 m³, skupna širina: 2.550 mm, skupna višina: 3.930 mm, Leto izdelave: 2026, Oprema: ABS, OMEPS Tipping Silo Semi-Trailer----Type: CR 60 Hjdpfx Aijx Nugdo Aonk Chassis: Two fully automatic welded I-beam main longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin; tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm; lift and lower valve, loading pressure gauge mounted at the top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring; 1st axle liftable without tractor unit, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with 385/65 R22.5 tires, brand at manufacturer’s discretion, on Alcoa Dura Bright aluminum rims, 11.75x22.5 offset 120 Braking System: EBS 4S/2M WABCO pneumatic braking system with RSS, according to standard 98/12/CE - ECE R13/09; connected brake pad wear indicator Landing Gear: Mechanical landing gear with two speeds, 2x 20t carrying capacity with tilting feet; rear with crank supports Electrical System: All lights in LED version; 24 volt electrical installation consisting of: One 15-pin socket in front of the fifth wheel mounted on the chassis beam, yellow side marker lamps as required, rear position lamps, front marker lamps, rear license plate lamps, lights according to standard 97/28/CE-2007/35/CE; 2 multi-chamber lamps at the height of the turntable mounted in aluminum brackets according to standard 97/28/CE-2007/35/CE; 1 LED work lamp on the tank; yellow warning lamp at the rear, mounted at the height of the hose pipes; 2x reversing lights on the underrun protection, 2x reversing lights at the height of the support legs (each switchable on the energy console) Tank Specifications: A horizontal tank fabricated from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn); single-chamber tank with 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE; wall thickness approx. 5 mm; test pressure 3.0 bar, operating pressure 2.0 bar; operating temperature -40°C to +80°C Loading Options: 5 manholes DN 450 with pivoting and foldable dome covers; each secured pressure-tight with 4 wing nuts; rubber supports for dome cover storage on top; rain gutter closed at the front, open at the rear Material Discharge: 1 material outlet cone DN 800 made of stainless steel, foldable, with INOX disc for loosening; material outlet cone can pivot laterally; shut-off valve DN 150 with white seal; connection: STORZ-A Air Piping: A 2.5'' stainless steel air collection pipe installed on the right operator side; a 4" stainless steel air distribution pipe mounted at the rear of the tank; air valves (shut-off valves) in stainless steel; top air and air connection hoses with 2" STORZ couplings; micron filter; vacuum valve on top of tank; 1x vibrator 1 meter in front of the turntable Ladder and Walkway: 1 aluminum ladder mounted rear left on the vehicle; 1 aluminum safety scissor rail with a separate folding ladder part deployable from below and a parking brake when opened; 1 aluminum safety walkway guided on the left along the top of the tank; anti-slip coating on the tank Delivery Hose Storage: 4 hose pipe holders, 5 m length DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings; hose holder with compressor hose D.76 Accessories: The side underrun protection is in anodized aluminum version