Odprta polprikolica s ponjavo

KRONE SD / Hubdach / EDSCHA / Mega / Liftachse

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, dolžina tovornega prostora: 13.573 mm, širina tovornega prostora: 2.484 mm, višina nakladalnega prostora: 2.995 mm, skupna širina: 2.550 mm, Oprema: ABS, Krone SD Mega Curtain Sider Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame Permissible total weight: 36,000 kg Unladen weight: 6,196 kg Payload: 29,804 kg Saddle height unladen: approx. 985 mm BPW Bergische axles Lift axle: 1st and 3rd axle Air suspension Disc brakes Edscha sliding roof Rsdpjycm Rgofx Af Aep Lifting roof Hydraulic lifting roof with a total lift of 500 mm, can be raised separately at all four corner posts Reinforced tarpaulin - sliding curtain Sliding curtain on both right and left sides Rear portal doors Side underrun protection on right, left, and rear 2x winding supports Access ladder rear right Toolbox on the left side Forklift accessible Metal bump stops Multilock outer frame ABS EBS ALB (automatic load-dependent brake) DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,573 x 2,484 x 2,995 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear portal load-through height: 3,045 mm Internal rear portal load-through width: 2,484 mm Tyres: 435/50R19.5 on ALCOA alloy rims Tyre tread depth left front: 6 mm Tyre tread depth left middle: 10 mm Tyre tread depth left rear: 6 mm Tyre tread depth right front: 6 mm Tyre tread depth right middle: 10 mm Tyre tread depth right rear: 6 mm Further equipment: Type: SD Suitable for tractor unit (ISO 1726 limited - tractor unit data required!) Distance king pin to center of support device: approx. 2,720 mm Saddle height unladen: approx. 985 mm Double T longitudinal and central beams, as well as outer frame with cross members and outriggers welded Multilock outer frame with universal cargo securing points every 100 mm Front build height: 80 mm (incl. floor and fifth wheel plate) 2" king pin Rear underrun protection in accordance with EC directive Side protection in accordance with EC directive Rear sliding step ladder Door retainer Two mechanical landing legs, 2 x 12 t, semi-round with base plate One-sided operation of landing legs, on front right 3 axles each with 9,000 kg load capacity BPW axles, 19.5", with air suspension (total lift 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With raise and lower function, including automatic ride height reset Automatic load-dependent electronic lift axle control for 1st axle Automatic load-dependent electronic lift axle control for 3rd axle Manual control through console for forced lifting (starting aid according to Directive 97/27/EC) and forced lowering via rotary switch Note: Reduced ground clearance in the lift axle area! Lift axle switching sequence: 3rd axle lifts first / lowers last Plastic wheel covers (mudguards) Splash protection in accordance with EC directive Brake system compliant with ECE Regulation 13 (including vehicle stabilisation function) Spring-loaded parking brake Brake line connections at the front approx. 675 mm above platform Diagnostics via ISO7638 socket (EBS supply cable) Standard air connections ISO 1728 (Palm couplings) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signalling system in accordance with ECE R48 2 LED number plate lights 2 outline marker lights with rubber arm, LED version LED side marker lights with direction indicator (blinker function) Electrical cable connections at the front approx. 450 mm above platform 24 Volt, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 at the front for auxiliary functions Additio

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, dolžina tovornega prostora: 13.561 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.003 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, Krone SD Curtain-Sider Mega Edscha Lifting Roof 2x Lift Axles (1st + 3rd Axle) Multilock External Frame Gross vehicle weight: 36,000 kg Tare weight: 6,196 kg Payload: 29,804 kg Unladen coupling height: approx. 985 mm BPW Bergische Achsen (axles) Lift axles: 1st axle + 3rd axle Air suspension Disc brakes Edscha sliding roof Lifting roof: Hydraulic, 500 mm total lift, can be raised individually at each of 4 corner posts High-strength tarpaulin curtain, sliding curtain sides right and left Rear portal doors Side and rear underride protection 2 crank supports Rear right access ladder Left and right toolboxes Forklift accessible Steel ram buffers Multilock external frame ABS EBS ALB DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,561 x 2,480 x 3,003 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear portal loading height: 2,785 mm Rear internal loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminium rims Tyre tread depth (left front/mid/rear): 7 mm / 10 mm / 5 mm Tyre tread depth (right front/mid/rear): 8 mm / 9 mm / 6 mm Further Equipment: Type: SD Compatible with tractor unit (ISO 1726 limited – engine vehicle data required!) King pin to centre of support device approx. 2,720 mm Unladen coupling height: approx. 985 mm Welded double-T longitudinal and central beams plus external frame with crossmembers and outriggers Multilock external frame, universal load securing option every 100 mm Front platform height: 80 mm (incl. floor and fifth wheel plate) 2" king pin Rodpfex E Ib Hex Af Aop Rear underrun protection according to EU directive Side protection according to EU directive Rear sliding step ladder Door retainer 2 mechanical landing legs, 2 x 12 t, semi-round with base plate Landing leg operation from one side, front right 3 axles, each rated at 9,000 kg BPW axles, 19.5", with air suspension (total travel 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With lifting and lowering device, including automatic driving height reset Load-dependent, fully automatic electronic lift axle control for 1st and 3rd axles Manual lift/lower function via control unit (forced lifting/driving aid per directive 97/27/EC and forced lowering via rotary switch) Note: Reduced ground clearance in lift axle area! Lift axle activation sequence: 3rd axle lifts first / lowers last Plastic mudguards Splash protection per EU directive Brake system as per ECE Regulation 13 (incl. vehicle stability function) Spring-loaded parking brake Brake line connections at the front approx. 675 mm above platform Diagnostics via ISO 7638 (EBS supply cable) Standard air connections ISO 1728 (Palm) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on a single axle Lighting & light signalling equipment ECE 48 2 LED number plate lights 2 outline marker lights with rubber arm, LED version LED side marker lights with turn indicator function Electrical cable connections at the front approx. 450 mm above platform 24 volt, 7-pin socket front, DIN ISO 1185 7-pin socket front, DIN ISO 3731 for auxiliary functions Additional 15-pin socket front, DIN ISO 12098 Multifunctional rear lights Steel ram corners at the rear

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.914 mm, skupna širina: 2.550 mm, Oprema: ABS, Krone SD curtain-sided Mega trailer with Edscha sliding roof, lift roof, and dual lift axles (1st and 3rd axle), Multilock outer frame Permissible total weight: 36,000 kg Unladen weight: 6,196 kg Payload: 29,804 kg Rjdpoxwq Rfofx Af Aop Unladen fifth wheel height: approx. 985 mm BPW axles Lift axle: 1st and 3rd axle Air suspension Disc brakes Edscha sliding roof Lift roof (hydraulic, 500 mm total lift - separately liftable at all four corner posts) Reinforced sliding tarp with roll-up function, sliding curtains right and left Rear portal doors Side and rear underrun protection 2 crank landing gears Rear right access ladder Left side toolbox 2 toolboxes right side Forklift compatible floor Metal ram buffers Multilock outer frame ABS EBS ALB DIN EN 12642 Code XL certified Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,620 x 2,480 x 2,914 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear portal loading height: 2,709 mm Rear internal loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminium rims Tyre tread depth (left/front): 7 mm Tyre tread depth (left/middle): 8 mm Tyre tread depth (left/rear): 6 mm Tyre tread depth (right/front): 7 mm Tyre tread depth (right/middle): 8 mm Tyre tread depth (right/rear): 6 mm Additional specifications: Type: SD Suitable for tractor units (restricted due to ISO 1726 – tractor data required) King pin distance to centre of landing gear: approx. 2,720 mm Unladen fifth wheel height: approx. 985 mm I-beam longitudinal and central members, side members welded with cross beams and outriggers Multilock outer frame, universal cargo securing options every 100 mm Front frame height: 80 mm (including floor & fifth wheel plate) 2" king pin Rear underrun protection as per EC guidelines Side guard protection as per EC guidelines Rear sliding step ladder Door retaining catch Two mechanical landing gears, 2 x 12 to, semi-circular base plate Single-side landing gear operation, front right 3 axles, 9,000 kg capacity each BPW axles, 19.5" with air suspension (260 mm total travel) and disc brakes (offset 120) Brake disc diameter: 370 mm With lift/lowering devices and automatic ride height reset Load-dependent, fully automatic electronic lift axle control for both 1st and 3rd axles Manual function via control panel for forced lift (starting aid per Directive 97/27/EC) and forced lowering via rotary switch Please note: reduced ground clearance in lift axle area! Lift axles control sequence: 3rd axle lifts first / lowers last Plastic mudguards Spray suppression device as per EC guidelines Brake system to ECE Regulation 13 (including stability control) Spring-loaded parking brake Brake line connections front approx. 675 mm above platform Diagnostics via ISO 7638 interface (EBS supply cable) Standard air connections ISO 1728 (palm coupling) Brake system manufacturer: Wabco EBS system, 2S/2M (2 sensors on one axle) Lighting and signal system to ECE 48 2 LED licence plate lights 2 LED outline marker lights with rubber arms LED side marker lights with integrated direction indicator (flashing function) Electrical cable connections front approx. 450 mm above platform 24 Volt, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 front for auxiliary functions Additionally, 15-pin socket DIN ISO 12098 at front Multifunction rear lights Steel ram protection corners at the rear

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.999 mm, skupna širina: 2.550 mm, Oprema: ABS, Krone SD Curtain Sider Mega Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame Permissible total weight: 36,000 kg Curb weight: 6,196 kg Payload: 29,804 kg Saddle height (unladen): approx. 985 mm BPW axles Lift axle: 1st and 3rd axle Air suspension Disc brakes Edscha sliding roof Lifting roof Hydraulic lifting roof with 500 mm total lift, can be raised separately at 4 corner posts Reinforced sliding curtain (awning restraint belts) Sliding curtain right and left Portal doors Side underrun protection on right, left, and rear 2x crank landing gears Access ladder rear right Toolbox left Toolbox right Rodpfx Ajxtrttjf Asp Forklift-accessible Steel rear impact bumper Multilock outer frame ABS EBS ALB (automatic load-dependent brake force regulator) DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area LxWxH: 13,620 x 2,480 x 2,999 mm External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm Rear portal loading height: 2,795 mm Rear internal loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminum rims Tread depth left front: 6 mm Tread depth left middle: 10 mm Tread depth left rear: 10 mm Tread depth right front: 5 mm Tread depth right middle: 9 mm Tread depth right rear: 4 mm Additional Equipment: Type: SD Suitable for tractor units (ISO 1726 restricted - tractor data required!) Distance kingpin to center support device: approx. 2,720 mm Saddle height unladen: approx. 985 mm Double T longitudinal and central beams as well as outer frame with cross and extension beams welded Multilock outer frame: universal load securing points every 100 mm Front frame height: 80 mm (incl. floor and fifth wheel plate) 2" kingpin Rear underrun protection according to EC directive Lateral protection according to EC directive Rear sliding step ladder Door stoppers Two mechanical support winders, 2 x 12 t, half-round with baseplate Single-sided operation of support winders, right side (FR) 3 axles, each with 9,000 kg load capacity BPW axles, 19.5", with air suspension (total travel 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With lifting and lowering device, incl. automatic ride-height reset Load-dependent fully automatic electronic lift axle control for 1st axle Load-dependent fully automatic electronic lift axle control for 3rd axle Manual function on control console for forced lifting (=start aid acc. to Directive 97/27/EC) and forced lowering via rotary switch Caution: reduced ground clearance in lift axle area! Lift axle actuation sequence: 3rd axle lifts first / lowers last Plastic wheel covers (fenders) Splash guard according to EC directive Brake system according to ECE Regulation 13 (incl. vehicle stabilization function) Spring-actuated parking brake Brake line connectors front approx. 675 mm above platform Diagnostics via ISO7638 connector (EBS supply cable) Standard air connections ISO 1728 (Palm) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signal system: ECE R48 2 LED license plate lights 2 outline marker lights with rubber arm, LED version LED side marker lights with integrated indicator (flashing function) Electrical cable connections front approx. 450 mm above platform 24 Volt, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 front for extra functions Additionally, 15-pin socket DIN ISO 12098 front Multifunction rear lights Steel rear corner bumpers