Nizki nakladalnik

PAVIC 2-Achs Forstmaschinen Tieflader Typ: STLT2Z 2-A...

- EBS
- LED lighting
- Alloy wheels
- Air suspension
- Spare wheel
- Toolbox
- Central lubrication
- Additional steering axle

PAVIC 2-axle forestry machinery low loader Type: STLT2Z for harvester transport ---- Incoming! Colour can be freely chosen!!!!

Fifth wheel load: 18,000 kg
Axle load: 24,000 kg (technical)
Gross weight: 42,000 kg (technical)
Unladen weight: 9,300 kg

Made in Germany!!!!

Chassis as steel welded construction from high-grade fine-grain steel
Lashing eyes 130 kN, 5 per side
Further lashing eyes: 3 pairs on the raised deck
Insert stake system made of galvanised steel with aluminium side walls (silver anodised)
Steel front wall approx. 400 mm high
Foldable aluminium drive-on ramps with mechanical safety
SKF central lubrication system with reservoir (brake light controlled) with approx. 20 lubrication points

Dimensions:
Total length: 16,000 mm
Kdjdpfxeylviwj Aa Roh
Deck length incl. rear section 11,364 mm
Saddle height: 1,330 mm
Ground clearance in driving position: 184 mm
Saddle offset: 600 mm
R1 dimension from kingpin forward: 410 mm (swing radius)
R2 dimension: from kingpin to frame: 2,150 mm (swing radius)

Further dimensions available on request (technical drawing)

Axles:
2x 12,000 kg (technical) Gigant with drum brake, incl. 8 pcs. 245/70 R17.5" branded tyres on Alcoa Dura Bright rims

Suspension:
Pneumatic with lift and lower function
Second ride height + approx. 50 mm can be activated from the cab. When 20 km/h is reached, vehicle automatically lowers again.
Including axle load gauge

Coupling device:
2" kingpin (interchangeable, single position)

WITHOUT landing legs! -> Customers use a wide timber beam placed under the front frame here.

Braking system:
Wabco EBS with axle load measuring device (Smartboard) including odometer
Parking brake: spring-loaded accumulator

Lighting system:
Tail lights 2 pairs (3-chamber lamp)
Side marker lights LED
Outline marker lights LED
Front and rear position lights LED
LED reversing light and auxiliary light, each round
Number plate light LED
1 rotating beacon, pluggable and switchable from cab via separate switch
4 pcs. LED work lights
4 pcs. overwidth markers, double secured (wing screw and pin) with red/white LED lighting

Steering:
Tridec HF-E (hydraulic forced steering on both axles) including automatic tracking and straight-ahead positioning.
Remote control Tridec (radio remote control), also usable with cable operation

Paintwork:
Entire steel construction shot blasted after welding and primed with special adhesion primer. Subsequent 2K finish in RAL colour of your choice.
Axles and wheel hubs are black or alternatively painted in RAL colour at additional cost
Other mounted parts are galvanised and/or painted / powder coated or made of aluminium (with or without anodising)

Approval:
Including §13 certificate
Including §70 certificate (Customer must provide suitable and approved 3-axle tractor unit) including, among others, circular driving test at TÜV Nord in Meppen.

This is a non-binding offer. Subject to prior sale, errors and changes reserved.

Axle configuration
Tyre size: 245/70-17.5...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.