Priklopnik z menjalnim šasijem

KRONE AZW 18 BDF Carrier Maxi Jumbo Zwillingsbereift

Krone AZW 18 zLT3B7 Container Trailer Jumbo BDF Swap Body Chassis ---->---- 4 container locks on 20' basis / front stop for WP 7.3 – convertible for WP 7

Permissible total weight: 18,000 kg

Tare weight: 2,890 kg

Payload: 15,110 kg

BPW axles

Air suspension

Disc brakes

2x LED work lights at the rear

LED tail lights

Side under-run protection on right, left, and rear

EBS

ABS

Wabco brake system

Air connection with coupling heads (red + yellow)

15-pin, 24-volt connector

Lifting and lowering device, 2 valves, 1st and 2nd axle

Long stroke

Steel air tank

Twistlock spacing (L x W): 5,860 x 2,260 mm

Bridge stop at front

Rockinger towing eye 40 mm

Lifting height: approx. 1,409 mm

Ride height: approx. 1,110 mm

Unladen ride height: approx. 1,045 mm

Lowered height: approx. 990 mm

Drop-off height: approx. 1,020 - 1,320 mm

External dimensions (L x W): approx. 9,350 x 2,550 mm

Length without towbar: approx. 7,200 mm

Wheelbase: 5,150 mm

1x toolbox right (defective)

Spare wheel carrier

Tyres: 245/70R19.5 twin tyres

Tread depth left front outer: 10 mm

Tread depth left front inner: 10 mm

Tread depth left rear outer: 9 mm

Tread depth left rear inner: 10 mm

Tread depth right front outer: 10 mm

Tread depth right front inner: 11 mm

Tread depth right rear outer: 8 mm
Hodpfeyklg Aex Abasfc

Tread depth right rear inner: 10 mm


Additional equipment:

Chassis:
Double-T longitudinal beams with welded cross members, neck height: 85 mm, 4 container locks on 20' basis,
removable tunnel centering in accordance with BDF specification,
1 pair additional guide rollers in the center,
Impact protection on the main beam with large rubber buffers,
Rear under-run protection in accordance with EU directive,
Side protection in accordance with EU directive,
Front stop for WP 7.3 – convertible for WP 7,
Frame length designed for WP 7 flush with rear (type code = B),
For drop-off height 1,020–1,320 mm (type code = 7),
Note: Drop-off height 1,020 mm only achievable on level ground,
Unladen ride height approx. 1,045 mm,

Turntable/Drawbar:
Turntable with ball-race ring,
Low-maintenance slewing ring,
With 40 mm towing eye,

Axles/Aggregate:
2 axles, each with 9,000 kg load capacity,
BPW axles, 19.5", with air suspension (total stroke 430 mm) and disc brakes,
Brake disc diameter: 370 mm,
With lifting and lowering device, 2 valves,

Tyres:
8x 245/70R19.5,
Without spare wheel,

Spare wheel carrier:
Basket type, mounted in front of axle aggregate, right side,

Mudguards:
Black plastic, two-part at front, rear half-shells with mudflaps,
Splash protection in accordance with EU directive,

Brakes:
Brake system according to ECE Regulation 13 (incl. vehicle stability function),
Spring-loaded parking brake,
Note: The service brake on the front axle can be released for coupling operations by actuating the parking brake,
Diagnostics via ISO7638 connector (EBS supply cable),
Standard air connections ISO 1728 (Palm),
1 wheel chock with holder,
Brake system: Wabco Premium,
EBS system, 4S/3M, 4 sensors on two axles,
Attention: This trailer must only be towed by tractor units which ensure correct ABS function!

Lighting:
Lighting and signaling equipment ECE R48,
LED side marker lights with turn indicator (flashing function),
2 contour lights with rubber arms, LED version,
24 volts, front with 15-pin DIN ISO 1185 plug,
ISO 37 plug

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.