Polpriklopnik

Wiese Baustoffauflieger mit Fassi Kran F240

Wiese Construction Material Semi-Trailer

Kingpin Load: 12,000 kg
Axle Load: 27,000 kg
Gross Vehicle Weight Rating (GVWR): 39,000 kg
Unladen Weight: 10,840 kg
Loading Platform Length: approx. 9,200 mm
Total Length: approx. 10,600 mm
Internal Width: 2,480 mm
Overall Width: 2,550 mm

Coupling Pin
1 position with 2" kingpin
Coupling Height
approx. 1,160 mm (horizontal position)
Main Beam Upper Edge (excluding floor): approx. 1,380 mm
Loading Height: approx. 1,410 mm

Lashing Eye Outer Frame D = 30 mm with perforated strip on the sloped section (160 mm high/30 mm floor lowering/4 mm wall thickness),
Main Beam Spacing
980 mm (center/center) - 1,130 mm (outer/outer)

Axles
3 axles each rated at 9,000 kg
Make: SAF, disc brakes D = 430 mm
Track Width: 2,040 mm
ABS: 1 axle sensor
Axle Spacing: approx. 1,510 mm / approx. 1,510 mm

Suspension
Original SAF air suspension with lift/lower valve
complete with retaining cables

Axle Lift
Axle lift on 1st axle; automatic load-dependent starting aid, can be activated via switch in cab

Steering
Mechanical forced steering on axles 2 + 3
Double-rod steering system / by Tridec

Braking System
2-line Wabco pneumatic brake system according to EU regulations 71/320/EEC et seq. with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support)
and 7-pin socket
1x ISO coupling head yellow
1x ISO coupling head red
Spring-loaded parking brake on 2 axles
All fitted with quick-release couplings
Aluminum air reservoirs

Air System
Compressed air installation with:
Fedpfx Adeyihg Horspc
1x lift/lower valve
1x level control valve
Aluminum air reservoirs
All fitted with quick-release couplings
Automatic lowering of air suspension for crane operation

Tyres
6 units, type: 385/65 R22.5"
Make: Manufacturer’s choice
Tyre pressure monitoring system for all 6 tyres, with display in the cab

Rims
6x steel rims 11.75x22.5", 10-hole, hub-centered, offset: 120 mm

Support Legs
Mechanical landing legs with T-pendulum foot, permissible lifting capacity: 2x 12,000 kg
Operable from one side, 2 speeds
Make: Manufacturer’s choice

Mudguards and Splash Guards
6x plastic semi-shell mudguards
Mudguard brackets reinforced with flat steel
Note: 3rd steering axle mudguard with internal cut-out

Lighting System
24V lighting system according to EU regulations 76/756/EEC et seq., including:
2x multi-chamber tail lights, side marker lamps, license plate lighting
LED side marker lights with indicator function
2x 7-pin and 1x 15-pin sockets to EU standard
Tail lights installed in reinforced light carrier = certified rear underrun protection
All necessary markings

Additional Installation:
Electrical connection for crane control pre-installed as specified!

Safety Equipment
Side impact and rear underrun protection in aluminum to EU specifications

Floor
OKULEN floor, 32 mm

Body
Straight front wall, 1,200 mm high, rigidly welded, made of 4x steel profiles, welded to the front sheet with aluminum hollow section as filler
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip stanchions K20 / 1,100 mm high, enabling clear loading access
Straight rear wall, 1,100 mm high, rigidly welded, made of 4x steel profiles, welded to the rear sheet, aluminum hollow section as filler
Inside with 625 mm high wear plate, galvanized steel
Both sides with Kinnegrip stanchions K20 / 1,100 mm high, enabling clear loading access
2x3 aluminum drop sides, 1,100 mm, foldable and lowerable
Integrated folding steps and external grab handles on the rear wall for access
Drop si

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.