Priklopnik sedeža z delovno ploščadjoFAYMONVILLE
Telemax Sattelauflieger - 3fach teleskopierbar
Priklopnik sedeža z delovno ploščadjo
FAYMONVILLE
Telemax Sattelauflieger - 3fach teleskopierbar
Stanje
Novo
Lokacija
Essen 

Prikaži slike
Prikaži karto
Osnovni podatki
- Proizvajalec:
- FAYMONVILLE
- Stanje:
- novo
Cena in lokacija
- Lokacija prodajalca:
- Heegstraße 6-8, 45356 Essen, Nemčija

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 49.250 kg
- Skupna masa:
- 65.000 kg
- Konfiguracija osi:
- 3 osi
- Skupna širina:
- 2.540 mm
- Oprema:
- ABS
Podrobnosti ponudbe
- ID ponudbe:
- A211-66-892
- Št. reference:
- 37151
- Nazadnje posodobljeno:
- dne 06.02.2026
Opis
You can find our complete range of vehicles with immediately and short-term available units on our website.
Excerpt from the specifications. Complete equipment list available upon request.
LOADING PLATFORM:
* Gooseneck design, length approx. 4,300 mm, with central beam
* Loading platform in triple-extendable design, length approx. 9,300 mm
* Fixed support table, approx. 200 mm wide, welded to the central beams
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock)
* Technical fifth-wheel load: 28,000 kg For tractors: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg each
* Air suspension with raise/lower valve
* 275/70 R 22.5 3PMSF twin tires. Brand at our discretion, load index 148/145M
* Steel front wall, approx. 800 mm high, certified according to EN12642 : 2016 XL. Maximum load capacity: 20,000 daN
* Supply line connection bar to the tractor approx. 600 mm below the bottom edge of the outer frame profile
* Yellow-red air couplings at the connection bar at the front
* ASPÖCK-UNIBOX on the connection bar at the front with sockets: 24N, 24S, & 15-pin; 24N connection according to ISO-1185, 24S according to ISO-3731, 15-pin according to ISO-12098
* 3 kW electro-hydraulic power unit for hydraulic operations
Cgedpfjyg T Hpsx Ahuen
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outwards (LC 10,000 daN)
* 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 crosswise stake pocket strip mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm. 1 x rear at gooseneck
* 3.5 inch kingpin
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Approx. 32 mm wooden floor encased in ALU omega profiles fitted on gooseneck and loading platform
* Large cross-section sliding tube with one locking position approx. every 1,000 mm
* Medium cross-section sliding tube with one locking position approx. every 3,000 mm and at full extension
* Small cross-section sliding tube with one locking position approx. every 3,000 mm and at full extension
* This provides locking positions at approx. every 1,000 mm
* 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN)
* 9 pairs of stake pockets recessed in the outer frame of loading platform, for plug-in stakes approx. 100 x 50 mm
* 2 crosswise stake pocket strips mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm
* 2 wheel chocks with holder under the loading platform
* Access ladder mounted on the right in the direction of travel
* Remote steering from front and rear via cable remote control, with single-track axle monitoring, without installation in the tractor
* Rear axle air spring venting activated when parking brake is applied
* Under the gooseneck and at the rear cross member, each on the left and right, 7-pin sockets for warning panels
* One 7-pin socket on the rear cross member
* Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
* Cable for power supply of the electric...
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Excerpt from the specifications. Complete equipment list available upon request.
LOADING PLATFORM:
* Gooseneck design, length approx. 4,300 mm, with central beam
* Loading platform in triple-extendable design, length approx. 9,300 mm
* Fixed support table, approx. 200 mm wide, welded to the central beams
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock)
* Technical fifth-wheel load: 28,000 kg For tractors: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced-steered, mounted on turntables
* Technical axle load: 12,000 kg each
* Air suspension with raise/lower valve
* 275/70 R 22.5 3PMSF twin tires. Brand at our discretion, load index 148/145M
* Steel front wall, approx. 800 mm high, certified according to EN12642 : 2016 XL. Maximum load capacity: 20,000 daN
* Supply line connection bar to the tractor approx. 600 mm below the bottom edge of the outer frame profile
* Yellow-red air couplings at the connection bar at the front
* ASPÖCK-UNIBOX on the connection bar at the front with sockets: 24N, 24S, & 15-pin; 24N connection according to ISO-1185, 24S according to ISO-3731, 15-pin according to ISO-12098
* 3 kW electro-hydraulic power unit for hydraulic operations
Cgedpfjyg T Hpsx Ahuen
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outwards (LC 10,000 daN)
* 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 crosswise stake pocket strip mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm. 1 x rear at gooseneck
* 3.5 inch kingpin
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg
* Approx. 32 mm wooden floor encased in ALU omega profiles fitted on gooseneck and loading platform
* Large cross-section sliding tube with one locking position approx. every 1,000 mm
* Medium cross-section sliding tube with one locking position approx. every 3,000 mm and at full extension
* Small cross-section sliding tube with one locking position approx. every 3,000 mm and at full extension
* This provides locking positions at approx. every 1,000 mm
* 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN)
* 9 pairs of stake pockets recessed in the outer frame of loading platform, for plug-in stakes approx. 100 x 50 mm
* 2 crosswise stake pocket strips mounted in the floor of the loading platform, for plug-in stakes approx. 100 x 50 mm
* 2 wheel chocks with holder under the loading platform
* Access ladder mounted on the right in the direction of travel
* Remote steering from front and rear via cable remote control, with single-track axle monitoring, without installation in the tractor
* Rear axle air spring venting activated when parking brake is applied
* Under the gooseneck and at the rear cross member, each on the left and right, 7-pin sockets for warning panels
* One 7-pin socket on the rear cross member
* Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917)
* Cable for power supply of the electric...
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2003
Pošlji zahtevo
Telefon & Faks
+49 201 8... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake




















