Nizki nakladalnik

Ebert TLS 43 ATV / Tele / 30,5to Nutzlast

Technical Data for EBERT TLS 43 ATV Special Low Loader:

Permissible fifth-wheel load: 19,000 kg; Permissible axle load: 24,000 kg; Gross vehicle weight: 43,000 kg; Unladen weight (DIN approx.): 12,500 kg; Low-bed length (internal): approx. 6,650 mm + 4,000 mm; Axle table length: 2,700 mm; Overall width: 2,550 mm; Loading height/low bed: approx. 200 mm – 350 mm; Sliding table length: 500 mm; Low-bed width extension to: 3,050 mm; Low-bed telescoping by: 4,000 mm; B-dimension: 12,000 mm; Entire vehicle flame-spray galvanized, with epoxy primer and 2K finish; Oversize warning signs front and rear with red/white panels.

Wheels: 9 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F

Steering: TRIDEC DLS with Tritronic

Axles: 12,000 kg – DLS independent wheel suspension, hydraulic steering and suspension

Front raised platform:
- Doors in the corners left and right, accessible from outside
- Storage box with lid behind the bulkhead, height 600mm, width 2,480 mm, depth 7,500 mm
- Spare wheel on the raised platform, right behind the partition
- Staircase on the right side for access from low bed to front raised platform
- Hydraulic coupling for decoupling on left side – 6-way Multi-Faster coupling
- 6 lashing points 3,000 kg spec. outside on the raised platform (recessed lashing rings)
- 2 lashing points 5,000 kg spec. on top of the longitudinal beams (rearward)

Low bed:
- Climbing aids at the boom – extendable
- Low bed telescopic by 4,000 mm, lockable every 500 mm
- With sliding table, lockable every 250 mm
- 28 lashing points 10,000 kg spec. outside in external frame
- 24 stake sleeves 90x90 mm, evenly distributed for low-bed extension to 3,050 mm
- 50 mm hardwood planks placed between extension tubes, 10 mm projection

Rear raised platform:
- Front end angled and perforated, for retrofitting ramps, galvanized through adapters
- Ramp intake profiles (Altec) – C rails at the rear
- 6 lashing points 10,000 kg spec. outside on rear raised platform
- 6 lashing points 5,000 kg spec. in excavator well
- 8 lashing points 5,000 kg spec. for oversize loads on external frame
- Closure of excavator well front and rear with wooden floorboard (insertable)

Electrics:
- Use NATO coiled cable, power supplied by towing vehicle
- Rotating beacon central at rear
- Side marker lights in LED design
- Standard upright rear light assembly (LC5)
- Work lamp on raised platform for illuminating low bed
- Decoupling: safety sensor and pressure switch for suspension

Air:
- Aluminium air tanks 60 l (2x 10 l, 2x 20 l)
- TEBS modulator
- Extension locks left and right (valve on side of rear raised platform)
- Double-release valve

Hydraulics:
- Hydraulic system on raised platform for steering, suspension, and detachable gooseneck

Accessories:
- 2 sets of 4 wooden planks as supports for low-bed extension and sliding table
- 2 chocks for decoupling
- 4 wheel chocks

Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ...) will be happy to assist you. Further information available on our website. Subject to errors and prior sale!

Bodeyfvwbjpfx Al Hedb
New TÜV, Rental possible

GVW: 43,000 kg
Contact Tobias Ebert for further information.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.