Odprta polprikolica s ponjavo

KÖGEL S24-1*Volumen* LiftA*Hubdach*

VIN: WK0S0002400300639

Permissible fifth-wheel load: 12,000 kg
Permissible aggregate axle load: 24,000 kg (8,000 kg per axle)
Technically achievable aggregate axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 39,000 kg
Technically achievable gross weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Internal loading length: approx. 13,620 mm
(G) Internal loading width: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Loading height unladen, driving position, horizontal: approx. 1,030 mm
(H2) Loading height laden, driving position, horizontal: approx. 1,000 mm
(H3) Reachable ramp height at vehicle rear with fifth-wheel height 910 mm, laden, raised: approx. 1,190 mm
Ride height set to 265 mm.
(K) Side through-loading height, internal: front approx. 2,735 mm – approx. 2,860 mm [adjustable in 5x25 mm steps], rear approx. 2,810–2,860 mm [adjustable in 1x50 mm step]
(K1) Height under roof, internal: front approx. 2,875 mm – approx. 3,000 mm [adjustable in 5x25 mm steps]; rear approx. 2,950 mm – approx. 3,000 mm [adjustable in 1x50 mm step]
(X1) Overall height unladen in driving position, horizontal: = H1 + K + T +/- superstructure height adjustment | = S + P + K + T +/- height adjustment
Superstructure adjustments: The construction of the “Mega” body allows height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (overall height, side through-loading height, internal height) change according to the selected superstructure setting.
(T) Roof construction height, side: approx. 180 mm. Due to the construction of the roof beam, the internal pallet width corresponds to the indicated height under the roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Build height above fifth wheel: approx. 90 mm
(S) Possible unladen fifth-wheel height: approx. 940 – 1,070 mm, level at approx. 940 mm (observe total height!)

Chassis
Conventional ladder frame in lightweight steel construction with continuous cross members.
Protective panel between outer frame and longitudinal members as tire guard for the rear wheels of the tractor unit.
Coupling plate 8 mm thick, with a 2" kingpin according to DIN 74080/ISO 337

Running gear
Axle lift mechanism on axle 1
Axle lift control is fully automatic, load-dependent. Start assist: activated by 3x braking, 30% overload up to a speed of 25 km/h.
Three-axle SAF INTRADISC unit, with disc brakes Ø 370 mm, ET 120.
Air suspension with 260 mm stroke

Chassis Attachments
JOST landing gears, mechanical with compensating foot, 24 t lifting capacity. Single-side operation on the right in the direction of travel.
Side underrun protection according to ECE-R73
2 large waterproof plastic toolboxes, internal dimensions approx. 923 x 422 x 460 mm. Mounted at the rear, 1x left and 1x right.
Retractable access ladder at the rear right.
Low, rigid rear underrun guard made of steel, according to ECE-R58
Profile height of underrun guard at least 120 mm, designed for increased test forces.

Brake/Air Suspension System
WABCO EBS system
Air suspension syst
Dsdpoycphzjfx Adgeup

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.