Tristrani nagibni priklopnik

SCHWARZMÜLLER kippanhänger

Stanje: novo, lastna masa: 4.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.880 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Frame Central axle welded steel frame construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; pin locking system for the tipper body with cross-over safety. Drawbar Klodpfxjwc Tbmo Adhjl Cranked drawbar with height-adjustable heavy-duty bolted towing eye 50 mm (approx. 110 mm adjustment). Support equipment Front: 1 mechanical landing leg with crank, on the left in the direction of travel; 1 access step bolted on. Axles SAF Intradrum axles with drum brakes, S-cam brake 420/180 mm, load capacity 9 t/axle, reinforced axle bodies, off-road version, automatic brake slack adjusters. No axle lift. Braking system / Suspension Braking system according to ECE regulation R13 Two-line compressed air brake system Braking system by Knorr EBS system 2S2M, 2nd axle sensed RSS/RSP stability control system Spring-loaded parking brake on 2nd axle Aluminum air tanks Brake/air connection lines with two single coupling heads (yellow/red) EBS/ABS connection cable Hose lines installed under the drawbar Electronic air suspension with automatic lowering via inductive switch and additional lowering lock via rotary switch on the trailer No lift and lowering device Assistance/Safety Systems SWIT – Schwarzmüller Intelligent Telematics, “LOCAL TRAC” package Tipper body Steel welded construction Fixed steel front wall, 4 mm, approx. 980 mm high 2 access steps inside and 1 outside on the front wall Wear-resistant fine-grained steel floor plate 5 mm (Slight floor waviness due to welding distortion possible) 5 pairs of high-lift lashing rings, 5 t (distance between lashing rings approx. 2,320 mm) One-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, folding with extended pivot catches and spring-lift assistance, additionally pendular Manual central locking for side walls left and right 2 rear corner posts at side wall height, fixed to the side Steel tailgate 4 mm (HB400), approx. 980 mm high, pendular with recessed mountings, hooks for dosing chains on rear wall and underside of body Tailgate locking = automatic pneumatic lock With sealing strips Hydraulics Single-line system with hydraulic connection hose incl. quick coupling SVK DN13 Tipper cylinder for 3-way tipping, starting lifting force approx. 30 t; 1 safety cable Tarp Plastic rolling tarp incl. aluminum tube and hand crank, side overhang approx. 400 mm, without customs closure, horizontal rope lacing on the right in direction of travel, zig-zag lacing front and rear; bracket and catch for rolled tarp on the right; hand crank holder Tarp fastening on the left in direction of travel with 2 tension belts with rubber pads and tension locks on the underside of the body Tarp color similar to RAL 9006 White Aluminum Paintwork Steel grit cleaning, epoxy zinc phosphate primer (multi-layer) and spray coating with 2-component polyurethane top coat Chassis = RAL 7021 Black Grey Tipper body including front wall = RAL 7021 Black Grey Side walls = RAL 7001 Silver Grey Rear corner posts = RAL 7021 Black Grey Tailgate = RAL 7021 Black Grey Wheel hubs black = powder-coated Support legs black = powder-coated Side underrun protection = factory selection Plastic parts black, unpainted Powder-coated add-on components black Hot-dip galvanized add-on components unpainted Errors excepted.

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 122, lastna masa: 4.100 kg, največja dovoljena obremenitev: 13.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2025, dolžina tovornega prostora: 5.100 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 980 mm, prostornina tovornega prostora: 12 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, medosna razdalja: 1.310 mm, Oprema: ABS, Dimensions Internal length approx. 5,100 mm Internal width approx. 2,420 mm Kjdok Ttc Sjpfx Adholl Overall width max. 2,550 mm Loading height unladen approx. 1,510 mm Frame Central axle welded steel frame construction in weight-optimized lightweight design with tipping arms and rear tipping shaft; Plug-in locking system for tipper body with cross-locking safety feature Drawbar Cranked drawbar with height-adjustable heavy-duty bolted towing eye 50 mm (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unladen approx. 800 mm - max. 1,000 mm Support device Front: 1 mechanical landing leg with crank on the left in direction of travel, brand at manufacturer’s choice, 1 step bracket bolted on Axles BPW EcoDrum axles with drum brakes, S-cam brake 420/180 mm, axle load capacity 9 t/axle, off-road version, automatic brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tyres 385/65 R 22.5, 160K, manufacturer at manufacturer’s choice (road tread) 4 steel rims 11.75 x 22.5, without offset, silver No spare tyre or spare rim(s) Braking system/Suspension Braking system according to EC directives 71/320 or ECE R13 Two-line compressed air brake system Brake system brand Knorr EBS system 2S2M, 2nd axle sensed RSS - stability program Spring-actuated parking brake on 2nd axle Aluminium air reservoir Brake/air connection lines with Duomatic quick-release couplings EBS/ABS connection cable Hose lines routed beneath the drawbar Electronic air suspension with automatic lowering function via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/Safety systems Axle load display via EBS CAN Bus signal for display in the driver’s cab Tipper body Steel welded construction Fixed steel front wall 4 mm, approx. 980 mm high 2 step brackets inside and 1 outside on the front wall Special fine-grain steel floor plate 5 mm (Slight floor ripple due to welding distortion possible) 5 pairs of high-swing lashing rings 5 t (distance between lashing rings approx. 2,320 mm) 1-piece reinforced aluminium hollow-profile side walls 60/40 mm, approx. 980 mm high, fold-down with extended swivel lock closures and spring-assisted lifting aid, and additional pendulum function Side walls left and right with manual central locking 2 rear corner posts at side wall height, rigidly mounted to the sides Steel rear wall 4 mm (HB400), approx. 980 mm high, pendulum type with recessed mounting, hooks for metering chains (on rear wall and underbody) Rear wall locking = automatic pneumatic lock 2 metering chains for the pendulum rear wall With sealing strips Hydraulics Single-line system with hydraulic hose and SVK DN13 quick connect coupling Tipper cylinder for three-way tipping, initial lifting force approx. 30 t; 1 safety cable Tarp Plastic roll tarp including aluminium rod and hand crank, side overhang approx. 400 mm, without customs closure, on the right in the direction of travel horizontal tarp bar rope lacing, front and rear zigzag lacing; Stop bracket and securing for rolled-up tarp on the right in the direction of travel; Holder for hand crank Tarp fastening on the left in the direction of travel with 2 tension belts incl. rubber pads and tension locks on the body