Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE MAX Trailer MAX200 Telesattel Bordwände

Our complete range of immediately and short-term available vehicles can be found on our website.

Excerpt from the specifications. Complete equipment details available upon request.

Load Platform:
* Extendable load platform with pneumatically operated locking mechanism
* Load platform with approx. 30 mm thick wooden floor enclosed in omega profiles
* 10 pairs of foldable lashing rings (LC 2,500 daN)
* 7 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* Loading width approx. 2,480 mm

Landing Legs:
* JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t)

Axles:
* BPW axles, air-suspended, with disc brakes (approx. 430 mm), lift/lower function (ET 120)
* Self-steering trailing axle, with electro-magnetic reverse lock actuated via reverse gear or manually
* Axle tools

Tyres:
* Tyres 385/65 R 22.5
Dkodpfoya Shlex Agkji

Brake System:
* Brake system according to EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit

Paintwork:
* Premium, durable corrosion protection on the standard shot-blasted welded frame ensured by 2-component (2K) zinc-dust primer
* High-quality 2-component (2K) topcoat, single-color in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)

Including the following additional equipment:
* Yellow-red air couplings on the galvanized front connection bar
* 2-inch king pin
* Yellow reflective tape as per EU regulations on sides, extension, and rear of the trailer
* European reflective boards (red-yellow) on the rear of the trailer
* Load platform with approx. 30 mm thick wooden floor in omega profiles
* Storage compartment for approx. 1,000 mm long stanchions in rear central beam
* 1 spare wheel holder under the load platform on the left side (in direction of travel)
* Bracket for rotating beacon on rear of trailer
* On gooseneck and rear end plate, left and right, one bracket each for warning signs incl. socket
* Load gauge for axle load determination incl. load chart
* Galvanized steel front bulkhead (EN12642-XL), approx. 1,600 mm high
* Foldable aluminium drop sides with rear wing doors (anodized), side height approx. 600 mm, with KINNEGRIP foldable stanchions
* Holder for aluminium drop sides, under load platform ahead of axles
* Holder for KINNEGRIP stanchions, under load platform behind axles
* 10 pairs of sockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the load platform
* Impact protection right and left on rear cross member
* 6 pairs of WADER container pockets in the load platform, for 1x 20' container, 2x 20' containers, or 1x 40' container
* One INOX toolbox, approx. 600 x 350 x 600 mm, under the load platform on the left (in direction of travel)
* 4 pairs of longitudinal stanchion socket rails on the load bed, for plug-in stanchions 100 x 50 mm
* Lift axle on front axle with TEBS E control depending on current axle load and loading condition
* Bracket for rotating beacon on warning panels
* Acoustic reverse warning signal
* 2 LED reversing lights mounted on the rear end plate
* HRM metallization (High Resistance Metallisation) of the outer frame

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.