Priklopnik z menjalnim šasijem

KÖGEL AW 18- 22,5"*SAF Achsen*Neuwertig

Location:
Hertle Spedition
Munninger Str 10
86732 Oettingen

VIN: WK0A0001800293377

Technical Data
Axle load: 9,000 kg
Gross permitted weight: 18,000 kg
Technically possible gross weight: approx. 18,000 kg
Unladen weight (standard configuration): approx. 2,550 kg
Unladen weight (custom configuration): approx. 2,580 kg
Theoretical payload: approx. 15,420 kg
(A) Wheelbase: approx. 5,040 mm
(D) Overall length: approx. 9,160 mm
(E) Overall width: approx. 2,550 mm
(M) Locking point distance: approx. 5,853 mm
(H5) Loading height unladen (drive position): approx. 1,255 mm
(H4) Loading height unladen (lowered): approx. 1,190 mm
(H5) Loading height laden (drive position): approx. 1,225 mm
(H6) Loading height laden (raised): at least approx. 1,380 mm
Ride height set to 450 mm.
Suitable for transportation of standard swap bodies as per EN 284, size C715 and C745.
Suitable for transportation of standard containers as per ISO 668/1496, size 20'. Rear-flush loading is not possible due to underrun protection design per EC regulation!
Hsdpfjx U Rawex Adhjfb
(N2) Stop front to locking center: approx. 650 and 800 mm
(O2) Distance from drawbar eye center to front edge of swap body C745: approx. 1,940 mm
(Y) Drawbar height unladen, horizontal: approx. 905 mm
Drawbar swivel range at 3° in driving operation: approx. +/- 130 mm, max. drawbar swivel range: approx. +/- 400 mm
(Q) Distance from axle center to drawbar mounting center: approx. 860 mm
Brake system according to ECE-R13
Electrical system according to ECE-R48
Steel lightweight frame. Standard front stops foldable and reversible. Securing via 4 container locks (twist locks), mounted on container beams per DIN EN 284. Bogie with ball race ring (diameter approx. 1,300 mm).
Front centering via guide rollers (Ø approx. 100 mm)
Rear centering via guide rollers (Ø approx. 100 mm)

Chassis
SAF INTRADISC axles with disc brakes, diameter 430 mm, ET 120. Air suspension with 220 mm stroke.

Vehicle Tyres
4 x 385/65 R 22.5 160J tyres (brand at Kögel’s discretion)
4 steel rims 22.5 x 11.75, offset 120 mm (ET 120).

Chassis Attachments
Spray suppression system according to Regulation (EU) No. 109/2011 for 2-axle trailers,
including 1 pair of quarter-circle mudguards in front of the front axle, 1 pair of quarter-circle mudguards with spray flaps behind the front axle, and 1 pair of half-circle mudguards with spray flaps on the rear axle.
1 wheel chock with holder
Side underrun protection according to ECE-R73.
Drawbar with height adjustment device, type-approved, with 40 mm drawbar eye according to DIN 74054, [L]
Drawbar length: approx. 2,250 mm. The operator must check the drawbar clearance on the towing vehicle!
High, rigid rear underrun protection made of steel according to ECE-R58
Height of underrun protection profile min. 120 mm, designed for increased test forces.

Brake / Air Suspension System
EBS system 4S/3M (EBS-E-PREMIUM), with stability program, EBS connector ISO 7638 with connecting lines, parking brake as spring-loaded brake.
Air suspension system incl. 2 raising and lowering valves, one each acting on front and rear axle. Installed between front and rear axles.
2 non-interchangeable coupling heads front ISO 1728
Air tanks for braking system and air supply made of steel (EN 286-2).

Rear Impact Protection
1 pair of rubber bumpers 200x150x120 mm mounted at end of frame

Tyres
Axle Position Dimension Rim Tread Depth
1 Left 385/65R22.5 Steel 12.0 mm
1 Right 385/65R22.5 Steel 12.0 mm

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.