Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis. Rungen

Frame
Standard ladder-type frame in lightweight steel construction with inserted cross members Chassis frame pre-cambered Coupling plate approx. 8 mm thick, fitted with a 2-inch kingpin according to DIN 74080 / ISO 337
Chassis
For indivisible loads, an increase in the total towing weight is permissible Axle lift mechanism on axle 1, fully automatic, load-dependent control of axle lift Manufacturer as per customer choice, Kögel Three-axle assembly, with disc brakes Ø approx. 430 mm, offset approx. 120 mm Air suspension with approx. 180 mm stroke
Wheels / Tyres
Wheels with internal sensors in accordance with UN ECE R141 6x 385/65 R 22.5 UNIROYAL TH 50 tyres 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)
Chassis Attachments
Landing legs (manufacturer as per choice by Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-side operation on the right in direction of travel Spray suppression system in accordance with Regulation (EU) No. 109/2011 1 pair quarter-circle mudguards in front of the axles 1 pair straight mudguards with spray flaps between 1st and 2nd axle 1 pair quarter-circle mudguards with spray flaps behind the axles 2 wheel chocks with brackets Side protection device to ECE-R73 2 waterproof plastic toolboxes, internal dimensions approx. 545 x 400 x 400 mm. Fitted at rear, 1 left, 1 right Retractable access ladder rear right Tall, rigid steel rear underrun protection in compliance with ECE-R58 1 pair each of extendable warning signs for oversize loads, retroreflective red / white, with LED lighting, spiral cable and plug connection. Mounted at front and rear sections of vehicle.
Brake / Air Suspension System
32110.057 EBS system 2S/2M with stability programme (includes ABS/ALB function), EBS plug-in connection ISO 7638 (without interconnection cabling), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connector via ISO 7638 plug EBS system (manufacturer as per customer's choice, Kögel) Air suspension system incl. 1 lift/lower valve, installed on the left in direction of travel behind the axle assembly. Driving position automatically set 2 foolproof coupling heads ahead ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2)
Floor
Floor panels approx. 30 mm thick Floor sealed all round Stake pockets for square insertable posts approx. 80 x 80 mm, arrangement according to drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 on the outside + 10 in the centre each)
Front Wall
Storage for max. 14 square insertable posts approx. 80 x 80 mm (length approx. 1,990 mm) at the inner front wall Front wall height approx. 2,000 mm with volumetric corner posts in steel, with profiled steel sheet, bolted/riveted to frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) at front wall according to EN 12640
Hfjdpfx Afjx Uvlfsfeb
Side Wall
VarioFix steel outer frame with holes 24 pairs of lashing rings on the outer frame (compliant with EN 12640), permissible tensile load approx. 5,000 kg per ring
Impact Protection
1 pair of steel buffer pads approx. 160x85x85mm on outer end of frame closure plate Crosswise galvanised steel angle as fork-lift protection, plus central locking cam protector, mounted on end plate of frame
Electrics / Electronics
Steel light bar, positioned above underrun protection KÖGEL LUXIMA Premium Package 2 multi-chamber tail lights

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.