Prikolica z nizko platformo

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstiel, voll hydr. Rampe

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underride protection * Swiveling supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel skirts, each with splash guards * Reflective contour tape on sides and at rear * Flip cover (hot-dip galvanized) for toolbox in turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (no stakes included) with integrated lashing option * Load securing package includes: two lashing eyes (6.4 t) at front left & right on main frame of turntable platform, five pairs of UVV lashing rings, tiltable and lowerable, loadable in all directions and flush-mounted in outer frame – 13.4 t in corners, otherwise 10 t * Six pairs of mechanical folding extensions for 3 m overall width (not in rear corner) * Widening planks stored in center of loading area * Excavator arm rest from rear axle to end cross member, approx. 2,100 mm long (two pairs of 6.4 t lashing rings lateral on excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shifting * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen deck height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen deck height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Curb weight: 5,900 kg * -- Technical max. permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Available from calendar week 12 / 2026 * Sample pictures Ibodpfx Ajx Ipb Hjb Usf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at rear * Side underrun protection * Swing-out supports at the rear on the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirting, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and lowerable lashing rings, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the loading area * Excavator boom holder over rear axle up to the end carrier, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side in the excavator boom holder) * Hydraulically one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black tone * 235/75 R 17.5 twin tires * 5,900 kg unladen weight Ibjdpfx Abex Ipbge Uef * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and interim sale reserved * Available from week 12 / 2026 * Sample pictures