Odvozna prikolica

WIELTON PS-2P Abrollcontainer-Anhänger SOFORT Verfügbar

Stanje: rabljeno, največja dovoljena obremenitev: 14.578 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2017, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.160 mm, prostornina tovornega prostora: 42 m³, skupna širina: 2.550 mm, skupna višina: 1.160 mm, Leto izdelave: 2017, Oprema: ABS, LARGEST SELECTION OF HÜFFERMANN TRAILERS IN SOUTHERN GERMANY – IN STOCK!! 2-AXLE ROLL CARRIER TRAILER – HÜFFERMANN Well-maintained used vehicle, first registration 21.04.2017 "HÜFFERMANN BlueLine" Tyre condition front axle 4x100%, rear axle 2x80%, 2x70% 4x brake discs front & rear axles new as of 12/2025!! 4x brake calipers front & rear axles new as of 12/2025!! Brake pads front & rear axles new as of 12/2025!! Towing drawbar NEW as of 12/2025 2x air tanks NEW as of 12/2025 Equipment: Product number / global manufacturer number H15720 = W09HAR1867GH15720 For transport of roll-off containers according to DIN 30722-1 Gross weight (permitted) 18 t Gross weight (technical) 20 t Frame length approx. 7,000 mm, for container internal length 5,500 to 7,000 mm Overall width max. 2,550 mm Container support height (in transport position) approx. 1,160 mm Type HAR 1870, twin tyres Welded high-strength steel S700 frame construction Chassis for rear loading Load securing with pneumatic low-tension locking system with 4 claws, Clamping force 2.5 t per claw, operation on the trailer, left side in the direction of travel 1 pair of foldable roller stops as variable container stop Low-maintenance, sealed ball-bearing slewing ring Fixed V-drawbar with 40 mm DIN towing eye, towing eye angled 4 degrees, D-value 125 kN, for twin-tyre chassis, drawbar retaining spring with tensioner Truck coupling height from 680 mm to 880 mm Gedpfex Dpd Rsx Adbetw Without lowering drawbar (container loading from the front not possible) Drawbar length 2,600 mm SAF INTRADISC 9t AXLES air suspension unit in reinforced version for high load centers. Disc brake 370 mm Automatic air suspension lowering 8 tyres 265/70 R 19.5, 141J, 8 steel rims 7.50 x 19.5, with offset, silver (outer repainted) KNORR braking system according to EC directives 71/320 or ECE R13 Dual-line compressed air braking system EBS system 4S3M, 1st & 2nd axle monitored Electronic braking and stability system EBS-RSS Spring-loaded parking brake on 2nd axle Steel air tanks (new) Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Holder for EBS and electrical plugs on the coupling head Air suspension without lift and lowering device Automatic lowering device, trailer automatically lowered when air supply is disconnected from the truck HÜFFERMANN BlueLine 24-volt lighting system according to EC directives 76/756/EEC Multi-chamber module tail lights, "HELLA brand" Front position lights Rear outline marker lights Side marker lights Additional LED reversing light License plate light Connection cable with 1 x 15-pin plug Paint finish: Blasted, arc-galvanized, epoxy primer, with 2K top coat applied by electrostatic process Material overlaps and transitions conserved with cavity wax Chassis = RAL 9005 Deep Black Load securing elements = RAL 1003 Signal Yellow Side reflective contour marking strips in white/silver, according to ECE 48 Rear reflective contour marking strip in yellow/orange, according to ECE 48 Plastic single-wheel mudguards with splash protection as per regulations Fixed steel profile underride guard ECE regulation R58 R3 Stainless steel lamp bracket + center plate matt 2 wheel chocks Rubber apron on underride guard Plastic toolbox, approx. 600x500x500 mm Side underrun protection made of aluminum profiles, as per regulation, with anodized center plate closed 1 “A” sign, foldable License plate holder Rear marking according to ECE standard "EC Certificate of Conformity (COC)" or "EC Individual Approva

Stanje: rabljeno, največja dovoljena obremenitev: 14.560 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, skupna širina: 2.550 mm, Leto izdelave: 2024, Oprema: ABS, MEILLER 2-osna kontejnerska polprikolica za kontejnerje z zunanjimi valji Prva registracija 10/2024 Lastna teža samo 3.440 kg Nosilnost 14.620 kg Višina nakladanja v voznem položaju 1.065 mm Za kontejnerje dolžine od 5.000 do 7.000 mm (po DIN 3072) Osi 8x 265/70 R 19,5 Bridgestone Gjdpfjytz Nxsx Adbstw Wabco Trailer EBS Wabco Smartboard vključno s prikazom obremenitve osi Sistem za nujno sprostitev za vali s torzijsko vzmetjo SAF osi z disk zavorami Zračno vzmetenje z funkcijo dviga/spusta ALU zračni rezervoar Popolna LED razsvetljava 2x LED delovna žarometa Vlečna droga dolžine 2.600 mm, oko 40 mm Nastavitev višine z vlečno vzmetjo in napenjalcem 2 pnevmatski zapahi v prečkah Stranska pritrdilna ušesa za dodatno varovanje tovora NAJEM je novo KUPITI, pri nas na voljo tudi kot Full-Service najem takoj.

Stanje: novo, največja dovoljena obremenitev: 14.904 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.050 mm, Leto izdelave: 2026, Oprema: ABS, WhatsApp Gtedpfxeyh Sl Ds Adbow HÜFFERMANN HAP 20.72 MultiCarrier Full Option, Arc-Galvanized!!! Equipment: Permissible gross weight: 18 t Technical gross weight: 20 t Unladen weight: approx. 5,096 t (+/- DIN tolerance) Dimensions Frame length: approx. 7,200 mm, internal container length: 6,000 – 7,000 mm + wheeled vehicles Total width max. 2,550 mm Container support height (in driving position): approx. 950 mm Type HPA 2072, twin tires Welded steel frame construction made from high-strength S700 steel Chassis configured for rear loading Load securing with pneumatic low-tension locking system with 4 claws, Clamping force 2.5 t per claw, operation at the trailer on the left side (direction of travel) 1 plug-in roller stop as a variable container stopper Integrated lashing rail on the outer frame for bolted lashing rings 6 pairs of lashing points in the front area of the outer frame Beveled approach at the rear with ramp storage compartment incl. steel plate cover Low-maintenance, sealed slewing ring Hook-in rail for aluminum drive-on ramps (WITHOUT RAMPS) 2 pairs of 5 t lashing rings mounted at the front on the platform, recessed in the rear floor 8 pairs of bolted 3 t lashing shackles on the outer frame, spaced approximately evenly Coupling Equipment Extendable drawbar, adjustable in 6 x 100 mm steps, with 40 mm DIN towing eye, straight eye, D-value 125 kN, for twin-tire chassis Drawbar retaining spring with tensioner Truck coupling height from 635 mm to 835 mm Drawbar length: 2,000–2,600 mm BPW EcoPlus low-loader axles with drum brakes, S-cam brakes 300/200 mm, axle load 10 t/axle, 17.5" Z tires, automatic brake adjusters 8 tires 235/75 R 17.5, 141J 8 steel rims 6.75 x 17.5, offset, silver Black plastic wheel nut caps Brake system complies with ECE Regulation R13 Two-line air brake system Brake system manufacturer: Wabco EBS system 4S3M, sensors on 1st and 2nd axle Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on 2nd axle Aluminium air tanks Brake/air connection lines with Duomatic quick couplers EBS/ABS connection cable Mount for EBS and electrical connectors at the coupling Air suspension with lift and lower function, operated separately front and rear via 2 rotary lever valves Automatic adjustment to programmed driving height above 15 km/h Schwarzmüller Intelligent Telematics Weight detection/axle load indication via EBS CAN bus signal for display in cab (truck must be prepared accordingly, not a calibrated scale) Tire pressure monitoring system according to ECE regulation 141, with pressure sensors in the wheels Acoustic reversing warning system/alarm, activated by reverse gear 24-volt lighting system according to ECE Regulation R48 Full LED multifunction tail lights "Aspöck EcoLED III" LED position lights at the front LED outline marker lights at the rear LED side marker lights, controlled via indicator signal LED license plate lights Connection cable 1 x 15-pin 2 LED work lights, mounted left and right under the outer frame 2 LED reversing lights, mounted rear left and right 7-pin socket at the rear Paintwork Shot-blasted, arc-galvanized, epoxy primer, final coating with 2K topcoat using electrostatic process Material doublings and transitions treated with cavity wax Chassis: RAL 9005 deep black Load securing elements: RAL 1003 signal yellow Drawbar/tow tube in drivi