Tovorna dvigalka na tovornjaku

VOLVO FH500 6x4 Fassi F545RA 2.27 mit Jib und Winde

Stanje: novo, moč: 375 kW (509,86 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.470 mm, dolžina tovornega prostora: 4.250 mm, Leto izdelave: 2025, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Bljdpfx Abox A Nn Tsmer Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double-strand operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt

Stanje: novo, moč: 375 kW (509,86 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.470 mm, dolžina tovornega prostora: 4.250 mm, Leto izdelave: 2025, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, žerjav, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 Jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A, double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Maximum front axle load (technical): 10.0 t Maximum rear axle load (technical): 21 t Volvo Dynamic Steering (VDS) 330 L aluminum tank on the right AdBlue tank usable capacity 64 liters Blsdsx A Npdepfx Abmjr Rockinger 50 trailer coupling for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, Stage E – Onboard diagnostics Cab color: signal white Heated and electrically adjustable rearview mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror Exterior sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running lights and low beam Automatic headlight range adjustment LED daytime running lights, “V-lights” Front LED fog lights Static LED cornering light Two amber LED beacon lamps, mounted on the front of the cab roof Roof grommets on both sides Wiring for roof-mounted headlights, max. 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Emblems/type identification installed ex works Emission type plate (Euro...) L-plate (low-noise vehicles -96) Flatbed body: Steel/welded construction, fixed-mounted, low-profile design. Length approx. 4800 mm, width approx. 2480 mm Removable aluminum sideboards, Manufacturer: Suer, height 600 mm, anodized finish, each side (right and left) Flush-mount lashing rings 2500 daN and 6500 daN per side, in slotted profile with flexible arrangement 6 stake pockets for stakes (3 per side) Hydraulically extendable flatbed section approx. 1200 mm, galvanized, loadable up to 3,000 kg, extendable with lighting and impact guard, recessed as low as possible, operable via radio remote control Robust headboard made of welded frame with recessed stake depot pockets Cladding panels and fenders made of tread plate, sandblasted and powder-coated, painted in vehicle color Toolboxes between rear axles with tread plate 5 toolboxes, tread plate natural finish, manufacturer BROSSBOX with ventilation. Size and arrangement depend on wheelbase and available space. Sandblasted and powder-coated, painted in vehicle color. Rear underrun protection and additional supports assembled, with installation of all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double-strand operation with foldable pulley and accessories. Endless slewing range All hydraulic cylinders double-acting Piston rods hard chromed Double linkage system with PROLINK (overbending knuckle arm up to 15°) Electronic overload cut-off device with FX500 FASSI stability control FSC-S/II incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure limitation and load-holding valves XF system (Extra Quick) + XP system (Extra Power) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %), 90% and 100% warning on the display Danfoss D850 control block with 4 control valves mounted on crane column Emergency crane control High-pressure filter supplied pre-piped Separate hydraulic tank (180 l) with filt