Odprta polprikolica s ponjavo

KÖGEL S24-1*Volumen-Pritschensattelanhänger*10x vorhan

VIN: WK0S0002400300637

Permissible kingpin load: 12,000 kg
Permissible aggregate axle load: 24,000 kg (8,000 kg per axle)
Technically possible aggregate axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross vehicle weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg

(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading platform length i.L.: approx. 13,620 mm
(G) Loading platform width i.L.: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Unladen loading height in driving position (level): approx. 1,030 mm
(H2) Laden loading height in driving position (level): approx. 1,000 mm
(H3) Achievable ramp height at vehicle rear with fifth wheel height 910 mm, loaded, raised: approx. 1,190 mm
Ride height set at 265 mm.
(K) Side through-loading height i.L.: front approx. 2,735 mm - approx. 2,860 mm [adjustable in 5x25 mm increments], rear approx. 2,810-2,860 mm [adjustable in 1x50 mm increment]
(K1) Internal height under the roof: front approx. 2,875 mm - approx. 3,000 mm [adjustable in 5x25 mm increments], rear approx. 2,950 mm - approx. 3,000 mm [adjustable in 1x50 mm increment]
(X1) Overall height unladen in driving position (level): = H1 + K + T +/- body height adjustment | = S +P + K+T+- height adjustment
Body settings: The "Mega" body design allows height adjustment of 5x25 mm at the front and 1x50 mm at the rear. Relevant heights (overall height, side through-loading height, internal height) change accordingly to the selected body setting.
(T) Roof construction height lateral: approx. 180 mm. Due to the design of the roof rail, the internal height across the width for pallets corresponds to the stated internal height under the roof.
(N) Front overhang (in accordance with ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (in accordance with ISO 1726): approx. 2,040 mm
(O) Rear swing radius (in accordance with ISO 1726): approx. 2,300 mm
(P) Structural height above fifth wheel coupling: approx. 90 mm
(S) Possible unladen fifth wheel height: approx. 940 - 1,070 mm, is level at approx. 940 mm (note overall height!)

Chassis
Standard ladder-type frame in lightweight steel construction with inserted cross members.
Cover plate between outer frame and side member as tire shield for the rear wheels of the tractor unit.
Coupling plate 8 mm thick, with a 2" fifth wheel king pin according to DIN 74080/ISO 337

Running gear
Axle-lift mechanism on axle 1
Axle lift control fully automatic, load-dependent. Start-up aid: activated by 3x brake, 30% overload up to a speed of 25 km/h.
Three-axle SAF INTRADISC unit with disc brakes Ø 370 mm, ET 120.
Air suspension with 260 mm stroke

Chassis attachments
JOST landing gears, mechanical with compensating foot, 24 t lifting capacity. Single-sided operation to the right in the direction of travel.
Side guard according to ECE-R73
2 large plastic toolboxes, waterproof, dimensions (internal) approx. 923 x 422 x 460 mm. Mounted at the rear, 1x left and 1x right.
Retractable access ladder at the rear right.
Kdjdsxxxr Hepfx Ac Aew
Low, rigid rear underrun protection made from steel according to ECE-R58
Height of underrun protection profile min. 120 mm, designed for increased test forces.

Brake/air suspension system
WABCO EBS system
Air su

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.