Polpriklopnik z nizkim nakladalnikom

Faymonville MAX Trailer 3-A-Tele-Semi-Radmul.-Rampen

Gooseneck:
- Gooseneck with 30 mm thick hardwood flooring
- Gooseneck rear end designed straight
- 3 pairs of lashing rings

Loading Platform:
- Extendable loading platform with rear chamfer approx. 1,000 mm x 8°
- 1 pair of fixed integrated wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm
- Wheel recesses with 15 x 15 mm square climbing strips and widened at the lower section
- Between 1st and 2nd axle, one pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm
- Includes 3-piece removable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t each
- 1 pair of horizontal lashing rings at the front of the loading platform
- 5 pairs of outward-folding lashing rings
- 2 pairs of outward-folding lashing rings
- Cutouts in the external frame of the platform for attaching tension belts
- Hardwood covering on the rear chamfer, approx. 48 mm thick, checker plate covering over the axles

Axles and Tyres:
- BPW axles and suspension, 2 axles fixed, 1 trailing steering axle
- Technical axle load: 12,000 kg
- Electro-magnetic reverse lock, can be activated via reverse gear and manually
- Air suspension with lifting and lowering valve
- Axle tool kit
- Tyres 235/75 R 17.5 3PMSF

Accessories Included:
- One galvanized steel front wall approx. 1,200 mm high
- 2" king pin
- Yellow-red air couplings on the galvanized front connection strip
- 2 wheel chocks with holder at the front wall
- Galvanized, extendable widening elements, extendable by approx. 230 mm per side
- Galvanized folding supports under the chamfer of the platform
- One holder for a rotating beacon at the rear of the trailer
- Movable hanging bar for ALU loading ramps at the rear of the vehicle
- Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer
- On the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
- One mud flap at the rear of the trailer
- European reflector plates at the rear of the trailer
- Manual and documentation on USB stick
- Plug-in ALU side fences and rear fence on the gooseneck, approx. 2,440 x 400 mm
- The rear galvanized stanchions are removable
- 3 pairs of WADER container pockets in the platform for one 20ft or one 40ft container
- 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the exterior frame of the platform
Gusdsxwxtbspfx Aahei
- One removable galvanized intermediate table with 1 pair of WADER container pockets
- 1 pair of recessed lashing rings along the center beam at the rear chamfer
- Four approx. 400 mm extendable warning signs, approx. 423 x 423 mm, with position light
- Bracket for rotating beacon on warning signs
- Load gauge (manometer) for determining axle loads including load diagram

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.