Polpriklopnik s premičnim dnom

KNAPEN 3-Achs-Schubbodenauflieger 92m³

Stanje: rabljeno, največja dovoljena obremenitev: 34.070 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2024, naslednji pregled (TÜV): 02/2026, prostornina tovornega prostora: 92 m³, skupna širina: 2.550 mm, Oprema: ABS, Our full vehicle inventory, including vehicles available for immediate or short-term delivery, can be found on our website. Extract from the equipment list. Full specification available on request. Vehicle * The trailer is built on a self-supporting chassis made of high-quality S700 steel * The frame runs from the landing legs to the rear * 2-inch kingpin, mounted on an approx. 10 mm thick saddle plate St 52-3 * Saddle plates for max. fifth wheel load 15,000 kg Axles * 3 x 9 t Knapen HD axles, rigid, with approx. 430 mm disc brakes, 10 studs ET 120 * Standard control panel with pressure gauges and suspension controls, positioned left in front of the axles * First axle is a lift axle, fully automatic via EBS, incl. start aid (3x brakes) * Remote control Tyres and Rims * 6 x steel rims * 6 x tyres 385/65 R22.5 Djdjwqlg Rjpfx Acwskw Mounted parts * Steel landing legs with tiltable base, max. static load: 50 t, max. lifting load: 24 t * 6 x semi-circular mudguards * Anti-spray mats mounted behind the 3rd axle * Standard lighting board + cover flap * Rear end carrier * Fixed splash guard underneath the bumper * Bumper according to R58-03. Height approx. 375 mm, ground clearance approx. 450 mm * Plastic toolbox with lower hinge, dimensions approx. 1,000 x 500 x 500 mm, positioned left rear of axles * Aluminium side underrun protection, open design, foldable according to EEC regulations * One long ladder, mounted behind the side underrun protection or under the trailer * One extendable ladder with platform for easy entry, mounted on the rear of the trailer * 2 wheel chocks, position: 2x left * Broom and shovel holder, mounted right in front of the axles Floor * CARGOFLOOR CF 500 SL-C system * The CARGOFLOOR system is equipped with E-Control * Smooth aluminium floor boards, approx. 10 mm, 21 boards * The floor boards are equipped with aluminium end caps * Stainless steel plate mounted at the rear underside for additional wear protection Front wall * The largest platform on the market is mounted on the front wall * 2 ladders on the front wall, positioned left and right * A door is mounted in the front wall for easy access to the front of the trailer, position: left – opens outwards Moving partition wall * For complete emptying, the trailer is equipped with an aluminium moving partition wall, with a brush to prevent contamination of the guide rails * Ground clearance approx. 100 mm Side walls * Extra-strong top rail profile with tracks for the moving partition wall * Top rail profile with notch for the keder rope of the sliding tarpaulin * The side walls consist of approx. 3 mm inner side and approx. 2 mm outer side * The side walls are continuously welded over the full height (inside) for maximum strength and minimal contamination * Welding is performed via a high-quality, fully automated welding process * Incl. side protective tarpaulin left side Rear * The rear doors are fully welded from wall and frame profiles for extra strength * Doors are equipped with a pneumatic safety lock for safe unloading * Through-loading height with closed top rail at rear approx. 2,665 mm * Single heavy-duty stainless steel locking bar per rear door Top rail * Steel top rail with wedge Roof bows * 4 pieces