Polpriklopnik s premičnim dnom

STAS 13.50 "WF 87 "FarmStar" GH ca. 3,85m GMP-HCCP

Chassis
Manufactured in self-supporting aluminium construction with corresponding reinforcements in the lower chord for particularly high stability and strength, aggregate chassis made of aluminium, 140 mm frame height! (max. 39 tons)

Axles and Suspension "Disc brake 22.5"
Jost axle assemblies 3 x 9 tons with DC air suspension, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with start-up aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension

Tyres and Wheels
6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, on Alcoa aluminium rims satin, 11.75x22.5 ET120

Landing Gear
Aluminium drop-leg landing gear, manufacturer: Alu Leg, with 2x10 t static load capacity, for air suspension we use swivel feet

Brake System
According to E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring-loaded brake system acting on two axles with control at the rear, aluminium air tank system, premium modulator

Electrical System
In accordance with German road traffic regulations (StVZO) with 2 LED five-chamber lights type Aspöck Europoint III integrated in the aluminium rear closure, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the sides at the height of the landing gear, 1 LED work light inside front left operable from outside

Body/Tipper Body "body fully welded inside"
Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2-3 mm), 600 mm wide, completely welded in with lower and upper chord, plank profiles fully welded on the inside!!, floor as moving floor system laid on 140 mm aluminium crossmembers, crossmembers closely mounted (approx. 350 mm), aluminium front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminium corner profiles in bevelled design, smooth rear wall in straight design with 2 aluminium swing doors 50/30 mm thick with 4 locking rods, welded into aluminium rear frame mounted in Teflon and inox bearings, travelling side wall suspended in reinforced aluminium upper chord with "Kevlar tarpaulin" for complete emptying, side brush sealing and additional Kevlar tarpaulin, integrated grain hopper with cover plate, operable from outside with inspection window rear left, 2 sample slides in the rear doors

Hydraulic System "Cargo Floor" 24-board system
Moving floor system installed in the floor with hydraulically actuated aluminium profiles on aluminium square profiles, mounted on approx. 880 PE-HD sliders, approx. 6 mm smooth floor, hydraulic stroke approx. 200 mm, fixed halves on front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with yet to be specified size and design, operating pressure 190 - max. 240 bar, aluminium end pieces welded into the floor, operation rear left with radio control in a lockable waterproof box, without hydraulic hoses
Dusdpexuy I Iefx Adron

Accessories
PVC mudguards with rubber flaps, aluminium spare wheel holder, side aluminium underrun protection in foldable design, 1 toolbox approx. 800x460x430 mm in plastic, approx. 3.7 m aluminium ladder, roll tarpaulin 680 g/m² quality with roll tarpaulin system including side quick release via tarpaulin

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.