Odprta polprikolica s ponjavo

KRONE SD / Hubdach / EDSCHA / Liftachse

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, dolžina tovornega prostora: 13.571 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.006 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, Krone SD Curtain Mega Edscha Lifting Roof 2x Lift Axle (1st axle + 3rd axle) Multilock Outer Frame Gross vehicle weight: 36,000 kg Curb weight: 6,196 kg Payload: 29,804 kg Unladen fifth wheel height: approx. 985 mm BPW axle assemblies Lift axle: 1st and 3rd axle Air suspension Disc brakes Edscha sliding roof Hydraulically operated lifting roof with a total lift of 500 mm, can be lifted separately at all four corner posts Visible stripe tarpaulin, sliding curtain Gusdpfx Aox E Ib Toghek Curtain sliders both right and left Rear portal doors Side and rear underrun protection 2x landing gear, manually operated Rear right access ladder Left-side toolbox Right-side toolbox Forklift loadable Metal bump stops Multilock outer frame ABS EBS ALB (automatic load-dependent brake) DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading dimensions (LxWxH): 13,571 x 2,480 x 3,006 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear portal internal through-loading height: 2,785 mm Rear internal through-loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminium rims Tread depth left front: 7 mm Tread depth left centre: 9 mm Tread depth left rear: 7 mm Tread depth right front: 14 mm Tread depth right centre: 9 mm Tread depth right rear: 7 mm Additional equipment: Type: SD Suitable for tractor unit (ISO 1726 limited – truck data required!) Distance kingpin to centre of landing gear approx. 2,720 mm Unladen fifth wheel height: approx. 985 mm Double-T main and central beams as well as outer frame welded with cross members and outriggers Multilock outer frame, universal lashing points every 100 mm Front frame height: 80 mm (incl. floor and coupling plate) 2" kingpin Rear underrun guard compliant with EC directive Side guards according to EC directive Sliding step-ladder at rear Door retainer Two mechanical landing legs, 2 x 12 tonnes, half-round with base plate Single side operation of landing legs, front right 3 axles, each with 9,000 kg load capacity BPW axles, 19.5", with air suspension (total lift 260 mm) and disc brakes (ET 120) Brake disc diameter 370 mm With lifting and lowering device, incl. automatic ride height adjustment Fully automatic, load-dependent electronic lift axle control for 1st axle Fully automatic, load-dependent electronic lift axle control for 3rd axle Manual operation from control console for forced lifting (start-up aid according to Directive 97/27/EC) and forced lowering via rotary switch Note: reduced ground clearance in lift axle area! Lift axle sequence: 3rd axle lifts first/lowers last Plastic wheel covers (mudguards) Spray suppression in line with EC directive Brake system compliant with ECE Regulation 13 (incl. vehicle stability function) Spring-loaded parking brake Brake line connections at front approx. 675 mm above platform Diagnosis via ISO7638 connector (EBS supply cable) Standard air connections ISO 1728 (palm coupling) Brake system make: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signal equipment ECE 48 2 LED license plate lights 2 LED contour lights with rubber arms LED side marker lights with direction indicator (blinker function) Electrical cable connections at front approx. 450 mm above platform 24 Volt, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 at front for additional functions Also 15-pin socket DIN ISO 12098 at front Multifunctional rear lights Steel impact corners at rear

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, dolžina tovornega prostora: 13.561 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.003 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, Krone SD Curtain-Sider Mega Edscha Lifting Roof 2x Lift Axles (1st + 3rd Axle) Multilock External Frame Gross vehicle weight: 36,000 kg Tare weight: 6,196 kg Payload: 29,804 kg Unladen coupling height: approx. 985 mm BPW Bergische Achsen (axles) Godpfx Aox E Ib Hjghsuk Lift axles: 1st axle + 3rd axle Air suspension Disc brakes Edscha sliding roof Lifting roof: Hydraulic, 500 mm total lift, can be raised individually at each of 4 corner posts High-strength tarpaulin curtain, sliding curtain sides right and left Rear portal doors Side and rear underride protection 2 crank supports Rear right access ladder Left and right toolboxes Forklift accessible Steel ram buffers Multilock external frame ABS EBS ALB DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,561 x 2,480 x 3,003 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear portal loading height: 2,785 mm Rear internal loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminium rims Tyre tread depth (left front/mid/rear): 7 mm / 10 mm / 5 mm Tyre tread depth (right front/mid/rear): 8 mm / 9 mm / 6 mm Further Equipment: Type: SD Compatible with tractor unit (ISO 1726 limited – engine vehicle data required!) King pin to centre of support device approx. 2,720 mm Unladen coupling height: approx. 985 mm Welded double-T longitudinal and central beams plus external frame with crossmembers and outriggers Multilock external frame, universal load securing option every 100 mm Front platform height: 80 mm (incl. floor and fifth wheel plate) 2" king pin Rear underrun protection according to EU directive Side protection according to EU directive Rear sliding step ladder Door retainer 2 mechanical landing legs, 2 x 12 t, semi-round with base plate Landing leg operation from one side, front right 3 axles, each rated at 9,000 kg BPW axles, 19.5", with air suspension (total travel 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With lifting and lowering device, including automatic driving height reset Load-dependent, fully automatic electronic lift axle control for 1st and 3rd axles Manual lift/lower function via control unit (forced lifting/driving aid per directive 97/27/EC and forced lowering via rotary switch) Note: Reduced ground clearance in lift axle area! Lift axle activation sequence: 3rd axle lifts first / lowers last Plastic mudguards Splash protection per EU directive Brake system as per ECE Regulation 13 (incl. vehicle stability function) Spring-loaded parking brake Brake line connections at the front approx. 675 mm above platform Diagnostics via ISO 7638 (EBS supply cable) Standard air connections ISO 1728 (Palm) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on a single axle Lighting & light signalling equipment ECE 48 2 LED number plate lights 2 outline marker lights with rubber arm, LED version LED side marker lights with turn indicator function Electrical cable connections at the front approx. 450 mm above platform 24 volt, 7-pin socket front, DIN ISO 1185 7-pin socket front, DIN ISO 3731 for auxiliary functions Additional 15-pin socket front, DIN ISO 12098 Multifunctional rear lights Steel ram corners at the rear

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.914 mm, skupna širina: 2.550 mm, Oprema: ABS, Krone SD curtain-sided Mega trailer with Edscha sliding roof, lift roof, and dual lift axles (1st and 3rd axle), Multilock outer frame Permissible total weight: 36,000 kg Unladen weight: 6,196 kg Payload: 29,804 kg Unladen fifth wheel height: approx. 985 mm BPW axles Lift axle: 1st and 3rd axle Air suspension Disc brakes Edscha sliding roof Lift roof (hydraulic, 500 mm total lift - separately liftable at all four corner posts) Reinforced sliding tarp with roll-up function, sliding curtains right and left Rear portal doors Side and rear underrun protection 2 crank landing gears Rear right access ladder Left side toolbox 2 toolboxes right side Forklift compatible floor Metal ram buffers Multilock outer frame ABS EBS ALB DIN EN 12642 Code XL certified Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,620 x 2,480 x 2,914 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear portal loading height: 2,709 mm Rear internal loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminium rims Tyre tread depth (left/front): 7 mm Tyre tread depth (left/middle): 8 mm Tyre tread depth (left/rear): 6 mm Tyre tread depth (right/front): 7 mm Tyre tread depth (right/middle): 8 mm Tyre tread depth (right/rear): 6 mm Additional specifications: Type: SD Suitable for tractor units (restricted due to ISO 1726 – tractor data required) King pin distance to centre of landing gear: approx. 2,720 mm Unladen fifth wheel height: approx. 985 mm I-beam longitudinal and central members, side members welded with cross beams and outriggers Multilock outer frame, universal cargo securing options every 100 mm Front frame height: 80 mm (including floor & fifth wheel plate) 2" king pin Rear underrun protection as per EC guidelines Side guard protection as per EC guidelines Rear sliding step ladder Door retaining catch Two mechanical landing gears, 2 x 12 to, semi-circular base plate Single-side landing gear operation, front right 3 axles, 9,000 kg capacity each BPW axles, 19.5" with air suspension (260 mm total travel) and disc brakes (offset 120) Brake disc diameter: 370 mm With lift/lowering devices and automatic ride height reset Load-dependent, fully automatic electronic lift axle control for both 1st and 3rd axles Manual function via control panel for forced lift (starting aid per Directive 97/27/EC) and forced lowering via rotary switch Please note: reduced ground clearance in lift axle area! Lift axles control sequence: 3rd axle lifts first / lowers last Plastic mudguards Spray suppression device as per EC guidelines Brake system to ECE Regulation 13 (including stability control) Spring-loaded parking brake Brake line connections front approx. 675 mm above platform Diagnostics via ISO 7638 interface (EBS supply cable) Standard air connections ISO 1728 (palm coupling) Brake system manufacturer: Wabco EBS system, 2S/2M (2 sensors on one axle) Lighting and signal system to ECE 48 2 LED licence plate lights 2 LED outline marker lights with rubber arms Gusdsxwq Rfopfx Aghjk LED side marker lights with integrated direction indicator (flashing function) Electrical cable connections front approx. 450 mm above platform 24 Volt, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 front for auxiliary functions Additionally, 15-pin socket DIN ISO 12098 at front Multifunction rear lights Steel ram protection corners at the rear

Stanje: rabljeno, največja dovoljena obremenitev: 29.804 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.999 mm, skupna širina: 2.550 mm, Oprema: ABS, Krone SD Curtain Sider Mega Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame Permissible total weight: 36,000 kg Curb weight: 6,196 kg Payload: 29,804 kg Saddle height (unladen): approx. 985 mm BPW axles Lift axle: 1st and 3rd axle Air suspension Disc brakes Edscha sliding roof Lifting roof Hydraulic lifting roof with 500 mm total lift, can be raised separately at 4 corner posts Reinforced sliding curtain (awning restraint belts) Sliding curtain right and left Portal doors Side underrun protection on right, left, and rear 2x crank landing gears Access ladder rear right Toolbox left Toolbox right Forklift-accessible Steel rear impact bumper Multilock outer frame ABS EBS ALB (automatic load-dependent brake force regulator) DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area LxWxH: 13,620 x 2,480 x 2,999 mm External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm Rear portal loading height: 2,795 mm Rear internal loading width: 2,480 mm Tyres: 435/50R19.5 on ALCOA aluminum rims Gedsxtrttepfx Agheuk Tread depth left front: 6 mm Tread depth left middle: 10 mm Tread depth left rear: 10 mm Tread depth right front: 5 mm Tread depth right middle: 9 mm Tread depth right rear: 4 mm Additional Equipment: Type: SD Suitable for tractor units (ISO 1726 restricted - tractor data required!) Distance kingpin to center support device: approx. 2,720 mm Saddle height unladen: approx. 985 mm Double T longitudinal and central beams as well as outer frame with cross and extension beams welded Multilock outer frame: universal load securing points every 100 mm Front frame height: 80 mm (incl. floor and fifth wheel plate) 2" kingpin Rear underrun protection according to EC directive Lateral protection according to EC directive Rear sliding step ladder Door stoppers Two mechanical support winders, 2 x 12 t, half-round with baseplate Single-sided operation of support winders, right side (FR) 3 axles, each with 9,000 kg load capacity BPW axles, 19.5", with air suspension (total travel 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With lifting and lowering device, incl. automatic ride-height reset Load-dependent fully automatic electronic lift axle control for 1st axle Load-dependent fully automatic electronic lift axle control for 3rd axle Manual function on control console for forced lifting (=start aid acc. to Directive 97/27/EC) and forced lowering via rotary switch Caution: reduced ground clearance in lift axle area! Lift axle actuation sequence: 3rd axle lifts first / lowers last Plastic wheel covers (fenders) Splash guard according to EC directive Brake system according to ECE Regulation 13 (incl. vehicle stabilization function) Spring-actuated parking brake Brake line connectors front approx. 675 mm above platform Diagnostics via ISO7638 connector (EBS supply cable) Standard air connections ISO 1728 (Palm) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signal system: ECE R48 2 LED license plate lights 2 outline marker lights with rubber arm, LED version LED side marker lights with integrated indicator (flashing function) Electrical cable connections front approx. 450 mm above platform 24 Volt, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 front for extra functions Additionally, 15-pin socket DIN ISO 12098 front Multifunction rear lights Steel rear corner bumpers