Priklopnik sedeža z delovno ploščadjo

SCHWARZMÜLLER 3-A Plateau BPW Lift Steckrungen Hartholz PalKis

SCHWARZMÜLLER 3-Axle Construction Material Flatbed Semi-Trailer RH125
REINFORCED CHASSIS 20t/4m!!!
FIRST REGISTRATION!!
German trailer, 1st owner, TOP CONDITION
Internal length approx. 13,620 mm
Internal width approx. 2,480 mm
Loading height front approx. 1,240 mm
Loading height rear approx. 1,210 mm
Welded steel frame construction
Reinforced for a central load of 20 t over 4 m loading length
Frame height at front approx. 140 mm
Longitudinal beams in the cranked area with additional bottom chord reinforcement
(can be unhitched when loaded)
Fifth wheel height adjustable: 1,090–1,190 mm
Reinforced 5 mm perforated outer frame with hole spacing 100 mm, elongated hole 40/25 mm and additionally 12 pairs of 4 t lashing rings, flush-mounted in the outer frame profile
SCHWARZMÜLLER load securing system "RuLasi"
6 removable cross-member sockets for 80x80 mm square posts, spanning the entire width (except at main beams), with center webbing for strap hooks
Spacing from front wall: 500/2550/4430/7200/9830/12870 mm
Storage for 80x80 mm square posts, directly within the front wall, across the entire width (except at main beams), hot-dip galvanized, for 15 posts
6 steel square profile stanchions 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for tension strap, hot-dip galvanized, stanchion securing with pressure release
6 steel square profile stanchions 80x80x5 mm, usable height approx. 1,000 mm, top with lashing holes for tension strap, hot-dip galvanized, stanchion securing with pressure release
Mechanical steel landing gears, 2 x 12 t with thrust compensation
BPW EcoDisc axles with disc brakes ø430 mm (22.5" discs), axle load 9 t/axle, on-road specification
Axle spacing 1,310 + 1,310 mm
Wheelbase 7,620 mm
Axle lift on 1st axle, lifts and lowers automatically depending on load
6x tyres 385/65 R 22.5, 160K, MICHELIN X Multi T
Steel rims 11.75 x 22.5, offset 120 mm, silver
Plastic wheel nut covers
Braking system according to EC Directive 71/320 ECE R13
Two-line compressed air braking system
Braking system make: Wabco
EBS system 2S2M, one axle sensed
Ledpfxjxquqpe Aflsru
RSS – stability program
Steel air tanks
Brake/air connections with 2 single couplers (yellow/red)
Air suspension with lifting and lowering device, total stroke approx. 200 mm
Automatic leveling to programmed driving height from 15 km/h
Axle load display via EBS CAN bus signal for display in driver's cab
Larch wood floor 40 mm laid lengthwise, impregnated on both sides with steel hat profile rails above the main beams and phenolic resin coated sub-layer, floor load capacity 7,000 kg forklift axle load
Aluminum hollow profile front wall approx. 2,400 mm high
Front wall inside with 2 lashing rings for cargo securing
Front wall reinforced with 4 center supports to the top
Front wall inner protection: 9 mm phenolic plywood
Bracket for squared timbers (2 L-angles for stacking 10x 100x100mm timbers, 2,300 mm wide)
Steel corner posts front, bolted
24-volt lighting system, compliant with EC Directive 76/756/EEC
Partial LED five-chamber tail lights "Europoint III"
8x LED side marker lights
2 additional LED reversing lights
Steel grit blasting, 2-coat zinc phosphate primer,
Chassis = RAL 7021 Black grey
Outer frame & closing plates = RAL 7021 Black grey
Corner posts + front wall + pallet box lid = RAL 9010 Pure white
Reflective contour markings to ECE 48
Plastic single-wheel fenders with spray protection
Access ladder, rear right
Delta rubber dock buffers +

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.