Polpriklopnik kiper

KEMPF SKM 36/3 AK 3-Achs Alu Sattelkipper 50m³

KEMPF SKM 36/3 AK – 3-Axle Aluminium Tipping Semi-Trailer 50 m³ – New Vehicle

----Vehicle Data
Manufacturer: Fahrzeugbau KEMPF GmbH
* Model: SKM 36/3 AK
* Design: 3-axle tipping semi-trailer with aluminium box body
* Destination country: Germany
* Permissible gross weight: 36,000 kg
* Axle load: 3 × 8,000 kg
* Fifth wheel load: approx. 12,000 kg
* Nominal coupling height (laden): approx. 1,200 mm (technically possible: 1,200–1,260 mm)
* Loading length: approx. 9,000 mm
* Loading width: approx. 2,430 mm
* Body height: approx. 2,300 mm
* Body volume: approx. 50.3 m³
* Overall height: approx. 3,710 mm up to loading edge (laden)
Ijdpoxn Eb Hjfx Aanear

----Paintwork / Design
* Chassis: Deep black RAL 9005
* Attachments: Hot-dip galvanized and black powder-coated
* Axles and hubs: Black (KTL-coated)
* Body: White aluminium RAL 9006
* Tarp: Silver No. 911 (Mehler)
* Conspicuity markings side (white) and rear (red) according to EC regulations

----Chassis and Running Gear
* Frame: High-grade welded construction made from fine-grained steel, conically cranked (approx. 80 mm)
* Axles: SAF INTRADISC plus Integral – off-road version, disc brakes Ø 430 mm
* Lift axle: 1st axle, fully automatic, liftable, with forced lowering in unladen mode
* Air suspension: Air suspension units with small air bellows (300 mm), plastic covers
* Air tanks: Aluminium version
* Landing legs: 2 aluminium drop supports, max. 24 t (2 × 12 t)
* Mudguards: PVC half-shells with rigid spray suppressor
* Toolboxes: 2 PVC, black, each approx. 660 × 500 × 460 mm
* Side underrun protection: right side
* Ladder: Removable, aluminium, approx. 4,000 mm long
* Access ladder: extendable at the rear (not UVV-compliant)

----Rear Under-run and Rear End
* Folding steel underrun protection according to ECE R58.03
* With spring-assisted lift and integrated towing eye
* Continuous KEMPF mudflap with large reflective panel (200 × 1,130 mm)

----Lighting and Electrics
* Complete LED lighting according to ADR standard
* Side marker, position, reversing, and rear fog lights in LED
* 2 LED work lights (left/right)
* Cargo area lighting with switch and indicator light
* 15-pin electrical connection
* Round lights with chrome rings
* Without reversing camera

----Tyres
* Rims: Alcoa Ultra ONE aluminium wheels, Dura-Bright EVO, ET 120
* Tyres: 385/65 R 22.5, brand per Kempf's choice

----Braking system and Safety
* Electronic braking system (EBS) Wabco with RSS (Roll Stability Support)
* ABS 4-channel (4S/2M)
* Parking brake via spring actuators
* Axle load indicator via EBS CANbus (display in cab possible)
* Trailer information module SmartBoard (Wabco)
* Tyre pressure monitoring system (TPMS) to ECE R141

----Hydraulics
* Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system
* Smallest piston hard-chromed
* Hydraulic connection: Edbro 1" screw-type coupling

----Body / Tipping Body
* Aluminium rear-tipping body made of hollow profiles
* Front wall: 20° sloped, approx. 5 mm thick, with reinforced supports for front ram
* Floor: approx. 7 mm thick, annealed aluminium
* Side walls: Aluminium hollow profiles, continuous 2.5 mm inner wall, fully welded
* Rear wall: Straight, pendulum, 2-wing (2/3 left, 1/3 right), automatic pneumatic locking
* Rear wall control: left switch (pendulum function), right switch (door function)
* Grain-tight design
* Slider: approx. 400 × 400 mm, lever operated to the left
* Dust bag with adapter frame (hopper approx. 250 mm high)
* Walkway with g

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.