Odprta polprikolica s ponjavo

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse SDP27

Krone SD Tarp Mega Edscha Sliding Roof 2x Lifting Axle (1st & 3rd Axle) Multilock Outer Frame

Permissible total weight: 36,000 kg,
Curb weight: 6,196 kg,
Payload: 29,804 kg,
Fifth wheel height unladen: approx. 985 mm,
BPW Bergische axles,
Lifting axle 1st and 3rd axle,
Air suspension,
Disc brakes,
Edscha sliding roof,
Hydraulic lifting roof with 500 mm total lift, can be raised separately at all 4 corner posts,
Reinforced curtain, sliding tarpaulin,
Sliding tarpaulin right and left,
Portal doors,
Side underrun protection right, left and rear,
2x crank supports,
Access ladder rear right,
Toolbox left,
Suitable for forklift traversing,
Metal dock bumpers,
Multilock outer frame,
ABS,
EBS,
ALB,
DIN EN 12642 Code XL,
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm,
Loading area (LxWxH): 13,583 x 2,480 x 2,999 mm,
Exterior dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm,
Clear loading height at rear portal: 2,795 mm,
Clear loading width at rear: 2,480 mm inside,
Tyres: 435/50R19.5,
1st & 2nd axles on ALCOA aluminium rims,
3rd axle on TruckSpeedline aluminium rims,
Tyre tread depth left front: 9 mm,
Tyre tread depth left middle: 10 mm,
Tyre tread depth left rear: 7 mm,
Tyre tread depth right front: 4 mm,
Tyre tread depth right middle: 10 mm,
Tyre tread depth right rear: 6 mm,

Further equipment:
Type: SD,
Suitable for tractor unit (ISO 1726 restricted – tractor unit data required!),
Distance king pin to centre of landing gear: approx. 2,720 mm,
Fifth wheel height unladen: approx. 985 mm,
Double-T longitudinal and centre beams as well as outer frame welded with cross members and outriggers,
Hodpoxn D Nijfx Affofn
Multilock outer frame, universal load securing points every 100 mm,
Front chassis height: 80 mm (incl. floor and fifth wheel plate),
2" king pin,
Rear underrun protection according to EC directive,
Side guard according to EC directive,
Rear sliding step,
Door holder,
Two mechanical landing gears, 2 x 12 t, semi-round with base plate,
Operation of landing gears on one side, front right,
3 axles, each with 9,000 kg load capacity,
BPW axles, 19.5", with air suspension (total stroke 260 mm) and disc brake (ET 120),
Brake disc diameter: 370 mm,
With lifting and lowering device, incl. automatic driving height reset,
Load-dependent, fully automatic electronic lift axle control for 1st axle,
Load-dependent, fully automatic electronic lift axle control for 3rd axle,
Manual function at operating console for forced lifting (= starting aid per Directive 97/27/EC) and forced lowering via rotary switch,
Note: reduced ground clearance in area of lift axle!,
Lifting axle sequence: 3rd axle lifts first / lowers last,
Plastic mudguard,
Splash guard in accordance with EC directive,
Brake system in accordance with ECE Regulation 13 (incl. vehicle stability function),
Spring-loaded parking brake,
Brake line connections at front approx. 675 mm above platform,
Diagnostics via ISO7638 socket (EBS power supply),
Standard air connections ISO 1728 (palm couplings),
Brake system manufacturer: Wabco,
EBS system, 2S/2M, 2 sensors on one axle,
Lighting and signalling equipment ECE 48,
2 LED number plate lights,
2 contour lights with rubber arm, LED version,
LED side marker lights with direction indicator (flashing function),
Electrical cable connections at front approx. 450 mm above platform,
24 Volt system, front with 7-pin socket DIN ISO 1185,
7-pin socket DIN ISO 3731 at front for auxiliary functions,
Additional 15-pin socket DIN ISO 12098 at front,
Mult

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.