Polpriklopnik z nizkim nakladalnikom

Faymonville MAX Trailer 4-Achs-Tele-Semi-hydr-Rampen

For every used semi-trailer, you receive a current and comprehensive inspection and function report.

Gooseneck:
- Gooseneck with rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring, 30 mm thick

Extendable load platform:
- Load deck extendable version with rear bevel approx. 1,000 mm x 8°
- 5 pairs of outward-folding lashing rings (LC 5,000 daN)
- 3 pairs of outward-folding lashing rings (LC 10,000 daN)
- 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN)
- Cut-outs in the outer frame for attaching tensioning straps (LC 2,000 daN)
- Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering

Two-piece steel ramps:
- One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with 48 mm thick hardwood covering
- Ramps with hydraulically folding sections, hydraulic lift, and hydraulic lateral adjustment
- Maximum load per pair: 40,000 kg

Axles and tires:
- BPW axles: two fixed axles, two trailing-steered axles, air suspension, drum brakes, with lift/lower function
- Trailing axles with electro-magnetic reverse lock, activated via reverse gear or manually
- Axle tool kit
- Tires: 235/75 R 17.5
- TPMS tire pressure monitoring system according to ECE R 141

Included accessories:
- 2" king pin
- Galvanized steel front wall, approx. 400 mm high
- One spare wheel with holder in front of the bulkhead
- Yellow-red air couplings on the galvanized front connector strip
- 4 wheel chocks with holders attached to the bulkhead
- Holder at the rear of the gooseneck for ALU loading ramps
- Galvanized folding supports below the rear bevel of the loading platform
- Holder for warning beacon at the rear of the trailer
- Cover plates to bridge the gap between ramps and load platform
- White reflective tape as per EU regulations on the sides, extension arm, and red on the rear
- Electro-hydraulic unit mounted underneath the rear loading deck
- On gooseneck and ramps left and right, holders for warning signs incl. socket
- Ramp control valves provided on the right side of the trailer
- One mud flap at the rear of the trailer
- European reflective warning signs (Red-Yellow) at rear of trailer
- On the gooseneck: plug-in ALU side and rear panels, approx. 2,440 x 400 mm
- Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm)
- 4 pairs of WADER container pockets in the load deck for one 20ft, two 20ft or one 40ft container
- 7 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading deck
- Galvanized side extensions, extendable by approx. 230 mm per side
- Lifting axle on the front axle, controlled via TEBS E based on current axle load and loading status
- Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the rear slope of the loading deck
- Painted sand layer on checker plates on gooseneck and load platform as anti-slip coating
- Central lubrication system BEKAMAX (Pico), with standard grease NLGI-2 and removable pump protection cover
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position light
- Warning sign brackets for rotating beacon
- 80 km/h speed stickers at rear and both sides
Godpfx Afexm Rlujfokc
- Load gauge for determining axle loads including load diagram

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.