Polpriklopnik kiper

BENALU 52m³ Getreidekipper Alu/5.4 t LEER/AUCH Miete

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2026, Tipping Cylinder: Hyva, tipping cylinder barrel chrome-plated - Stroke 7100 mm - Tipping warning signal. Connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) threaded coupling - female! Cranked aluminium chassis, aluminium body with tunnel, steel support legs, SAF offroad axles, 1st axle lift axle, 6x tyres 385/65 R22.5 Bridgestone RT, 1 towing coupling, round LED rear lights, 2+1, quick-release tarpaulin fastener. Toolbox, detachable step ladder, 2 external shovel holders, 25L water tank, ASW in the front loading area, pneumatic vibrator at the front of the floor with control valve on the left side, grain bunker with brackets at each grain chute. Aluminium body, smooth side walls - double-walled longitudinal hollow chamber profiles - vertical wall thickness gradient (3 mm at half height) - internal length 9.50 m - internal usable height 2200 mm - inward-sloping top chord profiles, floor with tunnel - floor thickness 5 mm, internal usable width 2410 mm, floor reinforcement struts - doubling of the top chord profiles - front wall 14° sloped, thickness 4 mm - conical recess reducing inside space to 450 mm. Universal tailgate - double bar locks - foldable upper traverse - 2 door leaves - 1 grain chute with protective cover in each leaf - rubber seals on the door leaves and rigid frame, door leaves with smooth panels, continuous inner welding seams. Roll tarp system - white transparent stripe - side tension straps - round aluminium roof bows (100 mm spacing) - rounded top section, pivoting, adjustable, removable, foldable to the side - aluminium forged MULTIFUNCTION tarp stops (straight - cranked - foldable), tarp pole yes, half-locking bar - tailgate locking: pneumatic automatic release of the pendulum frame with 4 hooks, upper tailgate hinge pendulum flap, upper aluminium double hinge - removable. Integrated in side wall height. Grain chutes right & left (aluminium). Kwedpfsrt N Sfsx Aa Rju

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 54 m³, Leto izdelave: 2025, Oprema: ABS, !!ZU VERKAUFEN, ZU VERMIETEN ODER NACH ABSPRACHE MIETEN MIT KAUFOPTION!! Ksdpfxjtf Sahe Aa Rowu ca. 52m³ Getreidekippauflieger Aluminium----* Hersteller: Benalu * Typ: Getreidekippauflieger * Baujahr: NEUFAHRZEUG * Volumen: ca. 54 m³ (9,50m lang x 2,41m breit x 2,30m hoch) * Techn. Gesamtgewicht: 39.000 kg * Leergewicht: ca. 5.600 kg * Achsen: 3x Achsen / Scheibenbremsen * Reifen: 385/65 R22,5 auf Speedline Aluminiumfelgen * Federung: Luftfederung mit Heben und Senken * EBS Wabco * Kombitür (Flügeltüren und Pendelklappe) * pneumatische Entriegellung der Pendelklappe beim Kippen * 2x Getreideschieber * Boden 5mm * Einzelkotflügel * Leerlastsütze * klappbarer Unterfahrschutz * Lademanometer * Bedienpodest vorne * Rollplane * Werkzeugkasten Deutsches Fahrzeug!! Deutsche Papiere!! ZU VERKAUFEN, ZU VERMIETEN ODER NACH ABSPRACHE MIETEN MIT KAUFOPTION!! Es handelt sich um Archivbilder!!

Stanje: novo, največja dovoljena obremenitev: 29.679 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.575 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 59 m³, Leto izdelave: 2025, Brakes: * Wabco EBS (Electronic Brake System) * Emergency release device for spring brake cylinders * 430 mm disc brakes ---- Axles: * 3 x 9 t SCB axles with lifting and lowering function (automatic lowering electronically via EBS) * 1st axle liftable, automatic/pneumatic ---- Electrical / Lighting: * Trailer information system * TrailerConnect control unit incl. battery with data storage for 12 months * Tire pressure monitoring system * Electric starting aid * 2 x 7-pin and 1 x 15-pin trailer sockets * LED lighting with dynamic indicators * 2 additional LED reversing lights * 2 LED work lights, laterally positioned at the 1st axle, switchable from the truck cab – no truck-side installation required – ---- General Attachments: * Aluminum air tank * Heavy-duty steel landing legs * Foldable underride protection with lifting aid * Lateral underrun protection * Rear towing eye * Alcoa satin-finish aluminum wheels * Chrome nut caps * Individual plastic mudguards, closed * 4.6 m aluminum access ladder stored laterally above the mudguards * Plastic toolbox at the front * Load pressure gauge * Shovel and broom holder stored laterally above the mudguards * Access step and standing platform at the front on the chassis * Rear sliding access ladder ---- Chassis: * Extra-light, weight-optimized chassis frame in new design, welded from fine-grained steel ---- Tipping Body: * Aluminum pallet rear tipper body * Hyva 250 bar front hydraulic cylinder * Front wall angled at 20° * Reinforced rear end profile with continuous rubber seal * Box-type body with 2.5 mm inner wall thickness * Internal profile joints fully welded * Pallet support rail * Aluminum floor – rear approx. 3,600 mm long, 8 mm thick; rest towards front 7 mm thick – pallet loading area of floor 9,850 mm long * Floor crossmembers in bin fully welded * Aluminum combination doors at rear, full-height (1/1), upright, with door and swinging function as well as double-joint swinging hinge * 1 grain slider per door * 1 grain discharge chute with sack * Automatic/mechanical 4-hook locking system * 1 locking pin per side (left and right) for locking hooks * 1 pair of additional mechanical locking latches ---- Sliding Tarpaulin: * Straight roof frame with 3 transverse bows, 90° swiveling, detachable, and telescopic * 4 tarpaulin fastenings with tension belt and ratchet, with external rubber impact protection profile as buffer for tarpaulin straps * Sliding tarpaulin in RAL 9006 metallic silver ---- Saddle Height: * Unloaded approx. 1,180 mm * Loaded approx. 1,150 mm ---- Paintwork: Kodpfx Aajwrvlts Rjwu * Chassis hot-dip galvanized * Body color RAL 9010 pure white * Axles, wheel hubs, landing legs painted in a shade of black ---- Information: * Permissible total weight of 39,000 kg technically possible * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Stanje: rabljeno, lastna masa: 5.933 kg, največja dovoljena obremenitev: 29.067 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, Condition – Very well-maintained vehicle from first owner Category – Semi-trailer Model – FLIEGL DHKA 350 – 35,000 kg Registration Month – 02 Registration Year – 2013 Gross Weight in kg – 35,000 Tare Weight in kg – 5,933 Payload in kg – 29,067 Kwjdpfxjwk Ux Ne Aa Rju Color – Silver Number of Axles – 3 Maintenance – Inspection book available Commercial/Export – Net price in € – 22,990 Subject to prior sale, modifications, and errors Phone +49 551 50 84 912 According to Manufacturer Axles and Suspension SAF disc brake axles with 370 mm disc diameter; air suspension with lift and lower function; 1st axle with automatic lift axle function, including forced lowering and traction aid, activated via “3x braking” (traction aid functional up to an axle load overshoot of 30% and up to a maximum speed of 25 km/h) Chassis Special lightweight steel welded construction; saddle plate with replaceable 2” kingpin Landing Gear/Support Legs None Tyres/Rims 385 / 65 R 22.5” as per manufacturer’s choice; polished aluminium rims as per manufacturer’s choice Braking System 2-line braking system according to EU regulations; EBS; two foolproof coupling heads; spring-loaded parking brake; without connecting cable Electrics 24 volts, multi-chamber lights; 2 x 7-pin foolproof sockets; lighting according to EU regulations; without connecting cable Hydraulics Low-pressure cylinder max. 170 bar with HDK screw coupling; fixed part, NW 48 mm (without hose connection) Body Floor made of high-grade, abrasion-resistant aluminium, 5 mm thick, Brinell 110 reinforced with U-profiles; sidewalls welded in hollow chamber profiles, with spill-deflecting top edge profile; slanted front wall; rear wall as pendulum tailgate with “double-joint hinge,” externally mounted, with dual hook locking. Note: Suitable only for transporting sand, gravel, and river pebbles with a maximum particle size of 20 mm! All other cargoes are excluded from warranty! Paintwork Chassis sandblasted, primed, and finished with one-color 2K/HS acrylic paint in DB Novagrau; body RAL 9010 pure white with Revolution lettering Other Equipment Folding underrun protection; wheel chocks with holder; 1/2 shell plastic mudguards; with Dekra inspection and certificate (according to §13 EG – FGV); contour markings with reflective strips to ECE R 048, white on sides and red at rear; exterior shovel and broom holder on front wall

Stanje: novo, največja dovoljena obremenitev: 29.740 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.890 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 51 m³, skupna širina: 2.550 mm, skupna višina: 3.750 mm, Leto izdelave: 2026, Oprema: ABS, Chassis * 1,150 mm fifth wheel height unloaded * Welded construction, weight-optimized using high-strength S700 steel * Side underrun protection made of aluminum profiles in accordance with ECE 73 * 2 plastic wheel chocks * Folding underrun guard at the rear * SAF Hercules 2-speed landing legs, full load * Aluminum ladder, length=2,840 mm * Toolbox - 165 L * Water tank - 30 L * Shovel and broom mounted on the chassis, above the mudguards * Dust bag, 1 pc. * Extendable ladder at the rear * Air bellows pressure gauge * Binotto hydraulic cylinder, top eye mounting Axles and Suspension * SAF disc brake axles, 3 x 9,000 kg, 22.5" INTRADISC CD * 3 rigid axles * A-axle as lift axle * 6x aluminum wheels ABERG POLISHED 22.5x11.75 ET-120 * Tire pressure monitoring system (TPMS) Electrics * Aspöck LED lighting - ECOLED II * LED reversing lights - 2 pcs. * LED work lights on side underrun protection - 2 pcs. * 2x 7-pin + 1x 15-pin connectors with EBS connection * With flashing side marker lights Body * Volume 51 m³ * Bulkhead inclined at 20 degrees * Side walls, inner thickness 2.5 mm, fully welded * Two-wing combined door, vertical aluminum (1/2 + 1/2) with portal beam * 2 grain chutes * Bottom tension locks * Pallet-width design * 5 mm floor * Floor crossmember spacing 360 mm * Tension chain between side walls * Operator’s platform on the chassis frame, access FR left (driver’s side) * PVC roll tarp, 680 g/m² with quick release and aluminum winding tube, center tube welded in the tarp Paintwork * Chassis painted RAL 7021 (black grey) Kjdpfx Aov U Hwtja Rewu * Body painted RAL 6018 (yellow green) * Tarp color: similar to RAL 3002 (carmine red)