Traktor

John Deere 7290 R

Stanje: dober (rabljeno), prevoženi kilometri: 16.400 km, vrsta goriva: dizel, skupna masa: 4.600 kg, Leto izdelave: 2001, Mercedes-Benz Sprinter 413 CDI 4x4 Sprint Shift transmission Swap body with tarpaulin Knjdpfxowi Ik No Ab Uof Tow bar, 2,000 kg capacity Unladen weight without body: 2,300 kg (with body approx. 3,200 kg) Gross vehicle weight: 4,600 kg Vehicle dimensions: Overall length: 6,000 mm Overall width: 2,100 mm Overall height: 3,000 mm Body dimensions: Length: 3,700 mm Height: 1,900 mm Wheelbase: 3,600 mm Tyres: 195 / 70 R 15C

Stanje: rabljeno, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 01/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5 3PMSF, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.300 kg, Oprema: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Loading platform: - Hydraulically lift- and lowerable platform after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of fold-in lashing rings inside at the front of the central beam (LC 10,000 daN) - Cut-outs in the external frame to hang tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramp sections fold and unfold hydraulically, with hydraulic lift and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, suspension, and tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires: 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included accessories: - One spare wheel with holder - 2" king pin - One galvanized steel front wall approx. 400 mm high - At the galvanized front connector strip, yellow-red air couplings - 4 wheel chocks with holder - Galvanized folding supports under the rear chamfer of the platform - One bracket for a beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and loading platform - Electro-hydraulic power unit at the rear, under the platform - At the gooseneck and at both left and right of the ramps, holders for warning signs including socket - On the gooseneck, plug-in aluminium side boards and rear board approx. 2,440 x 400 mm - The rear, galvanized insert stanchions are removable (superstructure length approx. 2,560 mm) - An electric cable winch with radio remote control, pulling capacity approx. 5,400 kg, including 9.5 mm thick wire rope, 24 m long with guide roller - Bolted 5t ring for guiding winch cable on the gooseneck without return pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the external platform frame - Lift axle on the front axle with control via TEBS E, depending on current axle load and loading state - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 2 pairs in the liftable bed - 5 pairs in the rear part of the platform - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - On chequer plates on the gooseneck and platform, painted sand coating for anti-slip - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - Four warning signs extendable by approx. 400 mm, size approx. 423 x 423 mm - Load gauge for axle load determination including load diagram Knsdpjxnarmofx Ab Usf - HRM Metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metallized with ZINACOR 850 (zinc 85% – aluminium 15%) by hot finishing

Stanje: novo, največja dovoljena obremenitev: 36.937 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer Lowbed Trailer with Hydraulic Gooseneck Available Immediately! TECHNICAL SPECIFICATIONS: * Fifth wheel height: 1,250 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform height: 875 mm * Wheelbase: 8,480 mm * Axle spacing: 1,360 mm * Axle load: 30,000 kg * BPW axles with air suspension and drum brakes, 10 t load capacity Knedpfxow Nlzqs Ab Uof * Unladen weight: 11,063 kg * Overall width: 2,550 mm * Permissible total weight (60 km/h): 52,800 kg * Permissible total weight (80 km/h): 48,000 kg CHASSIS: * 2x rigid front axles, 1x trailing steering axle at rear * Load-dependent manual axle lift system on the 1st axle * Tyres: 12x 245/70R17.5 * Air suspension, 1x load gauge FRAME: Made of high-quality, high-strength S700 MC steel * Gooseneck with 90° vertical corners * Jost landing legs at the front * Folding support legs at the rear * Grating floor RAMP: * Loading ramp capacity: 40 t * 2x hydraulic ramps, suitable for hydraulic sliding/folding operation, galvanized steel surface, 4,200 mm long and 850 mm wide, 9° ramp angle, 40,000 kg capacity and 3,510 mm height in closed position * Hydraulic gooseneck ramp, 2,800 mm long, 10° angle LOAD SECURING: * Lashing rings: 6x2 on gooseneck (6 t capacity), 6x2 on platform (6 t capacity), 8x2 on the outer frame (6 t capacity) * 8x2 stake pockets MISCELLANEOUS: * 1x rotating beacon * 1x work light * 2x2 wide load signs with lighting * SmartBoard Feel free to contact us for further information.