Tovorna dvigalka na tovornjaku

TATRA 41.500 8x8 Phoenix Fassi F710 Kran

Stanje: novo, prevoženi kilometri: 500 km, moč: 367 kW (498,98 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Tatra Phoenix 41.500 8x8 All-Wheel Drive with Fassi Crane featuring Jib and Winch New vehicle with day registration 06/2025 Long-distance driver’s cab Removable flatbed Possible use as tractor unit * Model: TATRA PHOENIX * Drive: 8x8/6, last axle driven and steered, planetary axles * Engine: MX13, 390 kW (530 HP) at 1,675 rpm, 2,500 Nm * 1,000 – 1,425 rpm range * Transmission: Automated ZF TraXon 16TX2640, 16 speeds * Steering: Left-hand drive * Cabin: Sleeper cab, H3279WHTE * GVW: 41,500 kg * Long-distance driver’s cab * Side fenders * Exterior sun visor (green, translucent) * Non-heated windscreen * Non-glazed side/rear panels * Electrically adjustable mirrors * Convex mirrors * Includes front curb view mirror * Central locking with remote control, 2 keys Cab – interior: * Luxury Air package * Storage compartment under dashboard, extended * Standard lower bunk mattress * Raised lower bed by 250 mm (sleeper cab, 260L storage space) * No upper bunk (extended cab) * Trailer couplings without center piece * Cooler or fridge (sleeper cab) * Manual aluminum roof hatch * Climate control panel * Dashboard – "Black Rock" * Textile cab wall trim * Interior trim color "DARK SAND" * Immobilizer 5 min SCM BV03-B1 * Standard auxiliary power supply Communication and Driver Management: * ALPINE communication system with camera * AM/FM + 2x GSM + GPS antennas * Digital tachograph * Cruise control * Toll preparation (Germany only) Wheels: * Continental 385/65R22.5 HSC1 XL TL[4] (10t) + 315/80R22.5 HDC1 ED TL[9], mixed operation * Spare wheel mounted on frame in transport position Driveline: * MX13, 390 kW (530 HP) at 1,675 rpm, 2,500 Nm * 1,000 – 1,425 rpm * ZF 16TX2640TO TraXon, engine MX13 (355 kW, 390 kW) * 2-stage reduction 2.30 TRK 0.61/1.44 H8, downshiftable, can be shifted from neutral Chassis: * Drive axle, axle load capacity 10t, small wheels * 8x8/6 configuration Crane: - Type: F710RA.2 xhe-dynamic - Endless slewing range - All hydraulic cylinders double-acting - Piston rods hard-chromed - Double knuckle boom system with PROLINK (overbending of knuckle boom up to 10 degrees) - Electronic overload cut-off FX900 - FASSI stability control FSC-SII incl. LMB II - Emergency stop function and visual alarm (90% and 100%) - Pressure relief and load-holding valves - XF System (Extra Fast) + XP System (Extra Power) + FL System (Full Lift) - RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display - Danfoss D900 control block with 4 control valves mounted on crane column - Emergency crane operation controls - High-pressure filter supplied plumbed - Separate hydraulic tank (260l) with filter and oil cooler mounted at crane base - Hydraulic outriggers, both sides hydraulic extendable, outrigger width 8.29m - Outriggers operable via remote control (black/white) - IMC System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control - Standard color RAL 3020 traffic red – all cylinders painted black - Load hook and attachment brackets (short / 500mm) - Transport position: folded transverse to direction of travel - Note: Observe on-board voltage / 12V or 24V, standard 24V - FASSI stability control FSC-S/II Bledpfsxb Hxmjx Adnep - IE742 connection box - Prepared for operation with variable pump (LS) - Proportional control

Stanje: novo, prevoženi kilometri: 500 km, moč: 367 kW (498,98 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Tatra Phoenix 41.500 8x8 All-Wheel Drive with Fassi Crane, Jib, and Winch New vehicle, first registration 06/2025 Long-distance driver’s cab Removable flatbed Can be used as a tractor unit * Model: TATRA PHOENIX * Drive: 8x8/6, last axle driven and steered, AP axles * Engine: MX13, 390 kW (530 Hp) at 1675 rpm, 2500 Nm * 1000–1425 rpm * Transmission: Automated gearbox ZF TraXon 16TX2640, 16 speeds * Steering: Left-hand drive * Cab: Long-distance cab, H3279WHTE * Gross vehicle weight: 41,500 kg * Long-distance cab * Side fenders * Exterior sun visor (translucent green) * Non-heated windscreen * Side and rear windows not glazed * Electrically adjustable mirrors * Convex mirror * With start-up mirror, front * Central locking with remote control, 2 keys Cab Interior: * Luxury Air * Storage tray under dashboard console, long version * Mattress on lower bunk, standard * Lower bed raised by 250 mm (sleeping cabin, storage space 260 liters) * No upper bed (long driver’s cab) * Trailer couplings without center section * Coolbox/refrigerator (sleeping cabin) * Aluminum roof hatch, manual operation * Air conditioning control for cab * Dashboard – Black Rock * Cab wall lining textile * Interior trim color "DARK SAND" * Immobilizer 5 minutes SCM BV03-B1 * Standard auxiliary power supply Communication and Vehicle Management: * ALPINE communication system with camera * Antennas: AM/FM + 2x GSM + GPS * Digital tachograph * With cruise control * Toll pre-wiring (Germany only) Rims: * Continental 385/65R22.5 HSC1 XL TL[4] (10t) + 315/80R22.5 HDC1 ED TL[9], mixed operation * Spare wheel mounted on the frame in transport position Powertrain: * MX13, 390 kW (530 Hp) at 1675 rpm, 2500 Nm * 1000–1425 rpm * ZF 16TX2640TO TraXon, engine MX13 (355 kW, 390 kW) * 2-step reduction 2.30 TRK 0.61/1.44 H8, downshifting, can be shifted from idle Chassis: * Driven axle, axle load capacity 10t, small wheels * 8X8/6 Crane: - Type: F710RA.2 xhe-dynamic - Unlimited slewing range - All hydraulic cylinders double-acting - Piston rods hard-chromed - Double linkage system with PROLINK (mast arm can be articulated up to 10 degrees) - Electronic overload cutoff with FX900 - FASSI Stability Control FSC-SII incl. LMB II - Emergency stop, visual alarm at 90% and 100% - Pressure relief and load-holding valves - XF system (Extra Speed) + XP system (Extra Power) + FL system (Full Lift) - RCH or RCS FASSI radio remote control, with linear levers and display of - Pressure values (bar and %) and 90% + 100% warning in display - Danfoss D900 control block with 4 control valves mounted on the crane column - Emergency manual control for crane - High-pressure filter supplied plumbed - Separate hydraulic tank (260 l) with filter and oil cooler mounted at crane base - Hydraulic outriggers, extendable on both sides, support width 8.29 m - Outrigger controls via radio (black/white) - IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control): Load-dependent speed control - Standard color RAL 3020 traffic red – all cylinders painted black - Load hook and mounting brackets (short/500 mm) - Transport position: folded crosswise to direction of travel - Note: Observe onboard voltage / 12V or 24V, standard 24V - FASSI Stability Control FSC-S/II - IE742 connection box Bledexb Hw Nepfx Adnep - Prepared for operation with variable displacement pump (LS) - Proportional...