Obrat za drobljenje

WERT Phantom

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 Nedpfx Aji Ai E Rogyecp - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, prevoženi kilometri: 3.346 km, moč: 194 kW (263,77 KM), vrsta prenosa: drugo, vrsta goriva: dizel, barva: drugo, lastna masa: 23.700 kg, obratovalna teža: 23.700 kg, prva registracija: 06/2018, emisijski razred: noben, vzmetenje: drugo, obratovalne ure: 3.346 h, voznikova kabina: drugo, gorivo: dizel, Oprema: UVV varnostni pregled, Kontaktna oseba za prodajo: Frank Rau / Ruski / Angleški / Nemški - Bachar Ibrahim / Arabski / Angleški / Nemški - Nodsvhanfjpfx Agyocp Storitve registracije, tehnični pregled HU/SP/UVV, prevoz do pristanišča Dizel, svetlo zelen Dodatna oprema Pripravljen za uporabo, cena na vprašanje (Mobile), jeklene gosenice, UVV, video Tip karoserije: Terex Cobra 230, udarni drobilnik, pripravljen za uporabo 3346 h Popolna zgodovina -2020 Udarne letve 3900 € -2021 Obrabne plošče 1100 € -2022 Nova sklopka 24000 € 2022 razni trakovi 5400 € itd. Pridržujemo si pravico do napak.

Stanje: rabljeno, prevoženi kilometri: 98.831 km, dvižna višina: 66.000 mm, Leto izdelave: 2016, obratovalne ure: 1 h, Intended use: Construction Drive type: Wheel Unladen weight: 51,600 kg Lifting capacity: 70,000 kg Serial number: 060 587 Nedout Dyxopfx Agyscp Front tire condition: 80% Rear tire condition: 80% Transport dimensions (L x W x H): 12.5 x 2.55 x 3.9 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, konfiguracija osi: 4x4, število sedežev: 1, Leto izdelave: 2013, obratovalne ure: 2.000 h, Oprema: pogon na vsa štiri kolesa, spojka prikolice, Thwaites Dumper Type: Mach Year of manufacture: 2013 Nsdpfx Ager H Df Soyecp Approx. 2000 operating hours 3-ton model Swivel skip Sale exclusively to commercial customers and for export. Subject to prior sale and errors. The listed price refers to the net price.

Stanje: rabljeno, največja dovoljena obremenitev: 42.500 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2022, with 12 axles, divided, hydraulically suspended, with hydromechanical forced steering, with rear taper and drive-on ramps STZ-L Gooseneck - robust welded steel construction - formed loading area 3,950 x 2,480 mm incl. tapered rear section - hydromechanical forced steering (dual-circuit steering) - turntable-mounted king pin plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load 24 t - rear turning radius: 2,600 mm Loading Deck Nsdpfx Agjw Etd Toyocp - stepped outer beams 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decking installed - extendable by 2,053 mm - includes aluminium bridging rails for creating a flat surface - excavator arm recess at rear of chassis: 4,900 mm long, 880 mm wide, 480 mm deep - chassis length at rear: 4,900 mm including 500 mm rear taper, loading height 890 mm - pair of wheel recesses in lower loading area - hydraulically suspended 3-axle chassis - divided Gigant axles with 600 mm stroke Rear of Vehicle - design: 500 mm rear taper - hydraulic rear support Drive-on Ramps - 2-piece ramps, length: 2,850 + 1,850 mm, width: 800 mm - rubber-coated surface with climbing strip Brake System - dual-line full air brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic rod plates (AGS) - parking brake operated via spring-loaded cylinders - ABV brake system Special Equipment - radio remote control for steering and ramp operation - central lubrication system Technical Data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Loaded saddle height: 1,300 mm Loading Deck Loading area (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Stepped outer beams: 4,630 mm long plus 2,053 mm extension Centre beam: 980 mm Excavator arm recess: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle with hydromechanical forced steering (dual-circuit steering)

Stanje: dober (rabljeno), prevoženi kilometri: 667.970 km, moč: 302 kW (410,61 KM), prva registracija: 07/2007, vrsta goriva: dizel, velikost pnevmatike: 315/80 R22.5, konfiguracija osi: 6x4, gorivo: dizel, zavore: retarder, barva: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, število prestav: 16, emisijski razred: Euro 4, vzmetenje: jeklo, število sedežev: 2, Leto izdelave: 2007, Oprema: ABS, električno upravljanje oken, retarder, spojka prikolice, zapora diferenciala, = Druge možnosti in oprema = - 6x4 - A/C - KLIMATSKA NAPRAVA - Listnato vzmetenje - Reduktor na pestu - Opozorilna rotacijska luč - Polnilna cev - Zapora - Priključna gred (PTO) = Opombe = Stanje Prenovljeno: × = Dodatne informacije = Splošne informacije Število vrat: 2 Kabina: DAF CF, enojna Registrska številka: 2FNX455 Tehnične informacije Število cilindrov: 6 Prostornina motorja: 12.902 cc Dovoljena skupna masa: 26.000 kg Pogonski sklop Znamka motorja: DAF Konfiguracija osi Dimenzija pnevmatik: 315/80 R22.5 Sprednja os: Največja obremenitev: 9000 kg; Krmiljena Zadnja os 1: Dvojna montaža; Diferenc. zapora; Največja obremenitev: 10.500 kg Zadnja os 2: Dvojna montaža; Diferenc. zapora; Največja obremenitev: 10.500 kg Funkcionalno Znamka nadgradnje: HIAB MULTILIFT Stanje Tehnično stanje: dobro Vizualno stanje: dobro Poškodbe: nobene Ncedpjxwhpxjfx Agyop

Stanje: rabljeno, moč: 169 kW (229,78 KM), velikost pnevmatike: -, Leto izdelave: 2017, obratovalne ure: 7.980 h, Oprema: kabina, klimatska naprava, Kabina za kmetijstvo, inox posoda, hladilna skrinja, talna preproga... Samodejna klimatska naprava Samozapiralna prednja os - kovinske zavore HL roka - joystick upravljalnik softgrip z 1 pomožnim Francoski priročnik Zaščita podvozja Registrska tablica z lučmi Super luksuzni sedež z visokim naslonom in zračno vzmetenjem Delovne luči: 6 spredaj na kabini, 2 zadaj na kabini, 2 na rešetki Smooth ride sistem Težko protitež (HD) Podatki o pnevmatikah: 750/65R26 Dobavni rok (v dneh): 1 Sistem proti zibanja Povratni alarm Klimatska naprava Ncjdpfx Agew I Hkkjysp Vzmeten sedež Znamka motorja: Cummins Moč: 230 KM DIN Število valjev: 6 Moč: 169 kW Prostornina: 6800 cm³

Stanje: rabljeno, največja dovoljena obremenitev: 23.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, GVN 3GVN29 OVERSIZE PLATFORM *KOC*LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES TECHNICAL DATA AND EQUIPMENT SHEET – VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL TRADE DESIGNATION: * 3GVN29 ----WEIGHT SPECIFICATIONS CURB WEIGHT * 13,000 KG WEIGHT DISTRIBUTION ACROSS AXLES 1st AXLE: 3,653 KG 2nd AXLE: 3,653 KG 3rd AXLE: 3,653 KG ACTUAL VEHICLE WEIGHT * 13,000 KG TECHNICALLY PERMISSIBLE MAXIMUM GROSS WEIGHT Ncedpsw Dlqisfx Agysp * 58,000 KG TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1st AXLE: 12,000 KG 2nd AXLE: 12,000 KG 3rd AXLE: 12,000 KG TECHNICALLY PERMISSIBLE MAXIMUM MASS ON AXLE GROUPS 1st GROUP: 36,000 KG MAXIMUM GROSS WEIGHT FOR REGISTRATION PURPOSES * 35,500 KG MAXIMUM AXLE LOADS FOR REGISTRATION PURPOSES 1st AXLE: 8,000 KG 2nd AXLE: 8,000 KG 3rd AXLE: 8,000 KG MAXIMUM MASS ON AXLE GROUPS FOR REGISTRATION PURPOSES 1st GROUP: 24,000 KG TECHNICALLY PERMISSIBLE MAXIMUM STATIC FIFTH WHEEL LOAD * 22,000 KG TECHNICAL MAIN DIMENSIONS (COC) • OVERALL LENGTH: 13,050 MM • LOADING PLATFORM LENGTH: 9,200 MM • VEHICLE WIDTH: 2,550 MM • OVERALL HEIGHT: 3,000 MM • PLATFORM HEIGHT: APPROX. 910 MM • NUMBER OF AXLES: 3 • TIRE SIZE: 235/75 R17.5 • SUSPENSION: AIR SUSPENSION • COLOR: RAL 5011 ----EQUIPMENT LIST • EXTENDED GOOSENECK • FIXED GOOSENECK • STEEL FRONT WALL • 2 REMOVABLE STEEL SIDE DOORS • 1 REMOVABLE STEEL REAR FLAP • FRONT STORAGE COMPARTMENT • FRONT TOOLBOX UNDER THE SWAN NECK • LOADING AREA ON THE SWAN NECK LOADING PLATFORM • HIGH-STRENGTH S355 STEEL • PLATFORM EDGES CLAD WITH WOOD • SURFACE COVERED WITH STEEL PLATE • 14 SIDE EXTENSIONS OF 230 MM EACH • 14 FORGED STEEL LASHING EYES, EACH 16 TON CAPACITY • PULL-OUT PANEL FOR OVERSIZE LOADS • OVERSIZE WARNING MARKERS • OVERSIZE WARNING SIGN • ANCHORING POINTS • ADDITIONAL SUPPORTS • PRESSURE GAUGE AXLES AND SUSPENSION • 3 AXLES • OSMAN KOC AXLES, IDENTICAL TO BPW DESIGN • 3rd AXLE STEERABLE • 1st AXLE LIFTABLE • DUAL TIRES ON ALL AXLES • FULL AIR SUSPENSION ON ALL AXLES • 1st AXLE LIFTABLE WITH DRUM BRAKE BRAKING SYSTEM • WABCO EBS SYSTEM, ELECTROPNEUMATIC, EU STANDARD • AUTOMATIC REVERSE ALIGNMENT FOR STEERED AXLE • DRUM BRAKES ON ALL AXLES TIRES AND RIMS • TIRES: 235/75 R17.5 • SPARE TIRE INCLUDED • WHEELS: 12 • MAX SPEED: 80 KM/H • RIMS: 6.75x17.5 STEEL, SILVER-GREY • SPARE WHEEL INCLUDED PAINTWORK • 2 LAYERS EPOXY PRIMER, EACH 100 MICRONS • MINIMUM 100 MICRONS 2K ACRYLIC PAINT • COLOR: RAL 5011 ELECTRICS AND LIGHTING • 24 VOLT SYSTEM, EC STANDARD • WATERPROOF, FROST-PROOF CONNECTIONS • SIDE AND POSITION LIGHTS • 6 THREE-FUNCTION REAR LIGHTS • 2 REVERSING/WORK LIGHTS • 2 INDICATORS • 2 LICENSE PLATE LIGHTS • 1 BEACON • 2 TRIANGULAR REFLECTORS • REFLECTIVE STRIPES AND E-MARKING • TRAILER LIGHT SYSTEMS • ROTATABLE REAR FLOODLIGHTS RAMPS • FIXED HYDRAULIC LOADING RAMPS • HYDRAULICALLY SLIDING LEFT/RIGHT • SUPPORT LEGS 24 TON DYNAMIC, 50 TON STATIC (OMS) • MANUAL RAMP SUPPORTS • ELECTRICAL CONNECTION FOR HYD (cut)

Stanje: rabljeno, vrsta goriva: dizel, Leto izdelave: 1998, obratovalne ure: 9.611 h, Znamka: Drugo OM čeljustni drobilnik FP 86 I Magnetni trak Transportni trak 2 x podpore CAT motor, 6 valjev Interna številka: 26X = Dodatne informacije = Namen uporabe: Rudarstvo Njdpfxoykuvts Agyecp Število valjev: 6 Znamka motorja: Caterpillar

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position Nsdpfotpta Djx Agyecp * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca