Polpriklopnik

Wiese Baustoffauflieger - Heckkran Kran Fassi

Wiese building materials semi-trailer

Weights:
- Fifth wheel load: 12,000 kg
- Axle load: 27,000 kg
- Permissible total weight: 39,000 kg
- Unladen weight: 10,840 kg

Dimensions:
- Loading platform length: approx. 9,200 mm
- Overall length: approx. 10,600 mm
- Internal width: 2,480 mm
- Overall width: 2,550 mm

Kingpin:
- 1 position with 2" kingpin

Coupling height:
- In horizontal position: approx. 1,160 mm
- Top edge of main beam (without floor): approx. 1,380 mm
- Loading height: approx. 1,410 mm

Lashing/running gear:
- External frame with lashing holes D=30 mm and perforated strip on the incline
(160 mm high / 30 mm floor recess / 4 mm wall thickness)
- Main beam distance: 980 mm (center/center) – 1,130 mm (outside/outside)

Axles:
- 3 axles, each with 9,000 kg load capacity
- Make: SAF with disc brakes D=430 mm
- Track width: 2,040 mm
- ABS: 1 axle sensor
- Axle spacing: approx. 1,510 mm / approx. 1,510 mm

Suspension:
- Original SAF air suspension, with lift/lower valve and safety cables

Axle lift:
- Axle lift for 1st axle, automatic load-dependent as starting aid, switchable via button in the cab

Steering:
- Mechanical forced steering on axles 2 and 3 (dual rod steering, Tridec system)

Braking system:
- 2-line Wabco air brake system according to EU Directive 71/320/EEC and amendments, including:
- EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket
- 1x ISO coupling head (yellow)
- 1x ISO coupling head (red)
- Spring-loaded parking brake on 2 axles
- All fittings with quick couplings
- Aluminum air tanks

Air system:
- Pneumatic installation with:
- 1x lift/lower valve
- 1x leveling valve
- Aluminum air tanks
- All fittings with quick couplings
- Automatic lowering of air suspension for crane operation

Tyres:
- 6 units type 385/65 R22.5"
- Manufacturer: at the discretion of the manufacturer
- Tyre pressure monitoring system on all 6 tires, indicator in the driver’s cab

Rims:
- 6x steel rims 11.75x22.5", 10-hole, hub-centric, offset: 120 mm

Support device:
- Mechanical landing legs with T-swing foot, permissible lifting load: 2x 12,000 kg
- Operable from one side, two speeds
- Manufacturer: at the discretion of the manufacturer

Wheel covers & mud flaps:
- 6x plastic half-shell wheel covers
- Mudguard mount reinforced with strip steel
- Note: Mudguard on steered axle 3 inside with cut-out

Lighting system:
- 24V lighting according to EU directive 76/756/EEC and amendments, including:
- 2x multi-chamber lights
- Lane marker lights
- License plate lighting
- LED side marker lights with indicator function
- 2x 7-pin and 1x 15-pin socket to EU standards
- Rear lights mounted in reinforced carrier = certified underrun protection
- All necessary markings

Additional installation:
- Electrical connection for crane control prepared as specified

Protective equipment:
- Side underrun and rear underrun protection in aluminum according to EU regulations

Floor:
- OKULEN floor, 32 mm

Superstructure:
- Straight front wall, 1,200 mm high, solid welded, made from 4 steel profiles,
welded to the front plate with aluminum hollow profile as filler
- Inner wear plate 625 mm high, galvanized steel
- Both sides Kinnegrip stanchions K20/1,100 mm high for through-loading
Dkjdpfx Abow Tgcwo Nju

- Straight rear wall, 1,100 mm high, solid welded, made from 4 steel profiles,
welded to the rear plate, aluminum hollow profile as filler
- Inner wear plate 625 mm high, galvanized steel
- Both sides Kinn

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.