Vlečno vozilo

MERCEDES-BENZ ANTOS 2540 * ABSCHLEPPWAGEN 9,40 m* TOP

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck Equipment: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Navigation system - 26,000 kg GVW - Automatic climate control Kodpfjw E Abnsx Ab Ujfa - White – long-distance specification – etc. Bodywork: - Superstructure made of laser-cut and folded special profiles in a low-bed design - Body length approx. 8,800 mm, minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 extended loading ramps, each with fixed section and extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking, incl. holders on the outer frame when not in use (optionally with strap security) - Ramp operation via electro-hydraulic unit, incl. emergency control at the valve block and manual pump in case of power failure - Hydraulic rear supports - All hydraulic functions controlled via wireless remote control - Grating floor with increased load capacity - Rear with angled tail - Front wall approx. 2,000 mm high made from inward-folded profiles - Stainless steel toolbox mounted inside in front of the front wall - 2 stainless steel side toolboxes on the frame for lashing equipment (one left, one right) - 1 stainless steel rear toolbox on the right (for hydraulic unit and valve block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at the rear - 2 access steps for loading area inspection Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs 6 t lashing points at the rear - 4 pcs 6 t lashing points at the front, below the front wall toolbox Paintwork: - Bodywork KTL powder coated in RAL 9005 black - Front wall painted RAL 9005 black - Ramps and grating floors hot-dip galvanized Decals: - Reflective tape on sides and rear in accordance with EU regulations. Further information available on request.

Stanje: rabljeno, prevoženi kilometri: 223.300 km, moč: 240 kW (326,31 KM), prva registracija: 07/2016, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, * 3 x šasija na zalogi, od 171.000 do 389.000 km * 2x medosna razdalja cca 4,00 m * 1x medosna razdalja cca 4,30 m (prva registracija 2014) * Euro 6 * Samodejni menjalnik * Klima * Vzmetenje: listnato/zračno/zračno * Ad-Blue Kfjdpsrt I Ivsfx Ab Uoa * Krmiljena os * Dvigljiva os * Shranjevalna omara * Centralno mazanje * Bluetec 6 * Zračni sedež * Strešno okno * Radio Bluetooth * Tempomat * Diferencialna zapora * el. stekla, el. ogledala, ogrevana ogledala * Pnevmatike 315/70R22,5 * Nemško vozilo * 1. lastnik * Neto prodaja znotraj EU samo z DDV depozitom in dokazilom o registraciji v ciljni državi (potrdilo o prispetju). Prodaja samo podjetjem, možen prevoz do pristanišča. Ponudba ni zavezujoča in je predmet sprememb. Napake in vmesna prodaja pridržane. Brez garancije za napake pri vnosu. Ogled samo po predhodnem dogovoru, WhatsApp

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 26.000 kg, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, barva: bela, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2 as construction machinery and access platform transporter. Truck Equipment: - Long-distance driver’s cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steered trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White – long-distance version – etc. Body: - Superstructure made of laser-cut and bent special profiles in a low-bed design - Body length approx.: 8,800 mm, minus stowage area approx. 490 mm - Frame height (unladen) approx. 1,050 mm Ksdpfew E Abhjx Ab Usfa - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed and 1 telescopic/extendable section, ramps laterally adjustable - Ramp surface made of grating floor; mechanical ramp locking including holders on outer frame when not in use (optionally with strap securing) - Ramp operation via electro-hydraulic power unit, including emergency control at the valve block and manual pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grating floor with increased load capacity - Rear section incl. bevel - Front wall approx. 2,000 mm high with inwards-bent profiles - Stainless steel storage box inside at the front wall - 2 stainless steel storage boxes mounted laterally on the frame for securing equipment (1 left, 1 right) - 1 stainless steel storage box at the rear right (for hydraulic power unit and valve block) - Work lights: 1 pair on the cab rear wall, 2 pairs laterally on the frame, 2 pairs at the rear - 2 access steps for walk-on access to the loading area Load Securing: - Longitudinal beams with Multi-X contour including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame in perforated design with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the base in front of the forward wall storage box Paintwork: - Body KTL powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating galvanized Labelling: - Reflective tape fitted laterally and at the rear according to EC regulations. Further information upon request.

Stanje: novo, prevoženi kilometri: 100 km, moč: 290 kW (394,29 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new Mercedes Benz Actros 2540L 6x2 designed as a transporter for construction machinery and work platforms. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeper bunk - Refrigerator - Navigation system - 26,000 kg GVW - Automatic climate control - White (long-distance transport specifications) – and more. Body: - Body made from laser-cut and folded special profiles in a low-profile design - Body length approx. 8,800 mm minus storage box approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each with 1 fixed and 1 extendable section, ramps laterally adjustable; ramp surface made of grating floor, mechanical ramp locking incl. holder on the outer frame when not in use (optionally secured with straps) - Ramps powered via electro-hydraulic unit, incl. emergency operation at control block and hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions controllable via remote control - Grating floor with increased load capacity - Rear including bevel; front bulkhead approx. 2,000 mm high, with profiles folded inward Kjdpfx Absw E Aawj Usfa - Stainless steel storage box inside, in front of bulkhead - 2 stainless steel tool/storage boxes lateral on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel box rear right (for hydraulic unit and control block) - Work lights: 1 pair on cab rear wall, 2 pairs on frame sides, 2 pairs at rear - 2 sets of steps for access to the loading area Load securing: - Longitudinal beams with Multi-X profile and 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the longitudinal beams - Outer frame with perforated design and 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points beneath the front bulkhead-mounted storage box Paintwork: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grating floor hot-dip galvanized Markings: - Reflective tape on sides and rear as per EU regulations. Further information upon request.

Stanje: dober (rabljeno), vrsta goriva: električni, barva: modra, Leto izdelave: 2007, Immediately deployable machine (full working machine) Including (incl.): CE Certificate, Operator’s and Maintenance Manual, Spare Parts Book We offer worldwide shipping. More pictures and a video of the machine can be found on our website. Genie Z40/23NRJ Year of construction: 2007 Working height: 14.32 m Platform height: 12.32 m Outreach: 6.91 m Payload: 227 kg Drive: 2x4 Height: 1.98 m Width: 1.50 m Length: 6.53 m Weight: 6,980 kg Power supply: 48V battery, 230V onboard charger Kfodpfx Abouu Txme Usa Feature: non-marking tires Feature: driveable at full height We also offer: Financing, leasing, hire-purchase (rent-to-own) Maintenance and repair Refurbishment and paint-coating of machines Spare parts service Genie is an American manufacturer of access platforms. The company was established in 1966 and Genie machines are known worldwide. = Further Information = Drivetrain Drive: wheel Weights Empty weight: 6,980 kg Functional Mast: articulating boom Lifting capacity: 227 kg Working height: 1,430 cm CE marking: yes Maintenance, History and Condition Number of owners: 1 Technical condition: good Visual condition: good Further Information Terms of delivery: EXW Max. horizontal outreach: 6.91 m Max. boom swing: 360° Max. platform rotation: 360° Transport dimensions (L x W x H): 6.53 x 1.5 x 1.98 m Country of manufacture: US For more information, please contact Stephan Honinx, Dietmar Pack or Simon Pack.

Stanje: rabljeno, prevoženi kilometri: 514.000 km, moč: 316 kW (429,64 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 26.000 kg, prva registracija: 09/2017, dolžina tovornega prostora: 9.350 mm, širina tovornega prostora: 2.520 mm, barva: bela, zavore: retarder, Leto izdelave: 2017, Oprema: ABS, klimatska naprava, žerjav, RENAULT T 430 Ploscha 9,35 m + VITEL + DALJINSKI UPRAVLJALEC Brez nesreče V DOBREM STANJU! LETO IZDELAVE: 2017 KILOMETRI: 514.000 km OPREMA: - ABS - CENTRALNO ZAKLEPANJE - ELEKTRIČNA OKNA - ELEKTRIČNA OGLEDALA - SERVO VOLAN - TAHOGRAF Platforma: 935 x 252 cm (D x Š) NOSILNOST: 13.000 kg SKUPNA MASA: 26.000 kg MEDOSNA RAZDALJA: 565/135 cm VELIKOST PNEVMATIK: 315/70R22,5 VZMETENJE: SPREDAJ: LISTNATE VZMETI ZADAJ: ZRAČNO VZMETENJE TEL: KUBA – POLJSKO, ANGLEŠKO, NEMŠKO, ITALIJANSKO SEBASTIAN – POLJSKO, NEMŠKO, ITALIJANSKO, ????? LASZLO – MADŽARSKO COSTEL – ROMUNŠČINA (Romunščina – uredimo vso izvozno dokumentacijo, vključno s številkami) Ksdsw Hv A Ujpfx Ab Uofa RADEK – ????? Ref. št.: 02369