Polpriklopnik z nizkim nakladalnikom

Faymonville 3-Achs-Semi-hydr. Ladeboden-hydr. Rampen

Gooseneck:
- Gooseneck in SNT design for optimizing the usable deck length, approx. length 3,700 mm
- Rear of gooseneck bevelled approx. 1,000 mm x 6°
- Technical fifth wheel load: 18,000 kg
- For tractor units: 4 x 2 or 6 x 2

Load Area:
- Load deck, approx. length 9,400 mm, with rear bevel of approx. 900 mm x 6°
- Load area after the gooseneck, hydraulically liftable and lowerable
- Deck length approx. 3,000 mm. Load capacity up to approx. 9,000 kg

Ramps:
- One pair of two-piece steel ramps, approx. 4,350 x 900 mm
- Hardwood covering
- Hydraulically foldable ramp tips
- Ramps can be hydraulically shifted individually approx. 235 mm outwards and 365 mm inwards

Axles, Suspension, and Tyres:
- BPW axles and suspension, two rigid axles, one self-tracking axle
- Technical axle load: 12,000 kg
- Air suspension with lifting and lowering valve
- Tyres 235/75 R 17.5

Standard Equipment Included:
- Plug-in steel front wall, approx. 400 mm high
- Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917)
- 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches)
- Outer beam of gooseneck with fastening holes for bolted lashing rings
- First hole approx. 200 mm from the front, then approx. every 400 mm
- 2 pairs of screw-in lashing rings included (LC 5,000 daN)
- One mounting hole in the upper rear area of the gooseneck outer beam for a bolted lashing ring
- 1 pair of screw-in lashing rings included (LC 10,000 daN)
- 3 pairs of recessed lashing rings inside outer beam of gooseneck (LC 5,000 daN)
- 3 pairs of lashing rings in the center of the gooseneck (LC 5,000 daN)
- 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN)
- On the gooseneck: 1 pair of plug-in anodised aluminium side boards, approx. 400 mm high
- On the gooseneck: one plug-in anodised aluminium rear board, approx. 400 mm high
- Over gooseneck: approx. 40 mm hardwood covering
- 2'' king pin
- Guide plate of gooseneck for fifth wheel, approx. 500 mm wide
- 4 wheel chocks
- Mechanical landing legs with 2-speed gearbox and crank
- JOST Modul B – static test load = 50,000 kg
- On the lifting bed: continuous hardwood floor approx. 50 mm thick, interrupted between the axles
- 9 pairs of recessed, foldable lashing rings in the outer frame of the load deck (LC 10,000 daN)
- 3 pairs in the lifting bed outer frame and 6 pairs in the load deck outer frame
- 1 pair of folding mechanical rear stabilizers, single-lever operation
- Central lubrication system with one pump, BEKAMAX brand, with standard grease per NLGI-2
- Hardwood covering on the sloped section of the deck
Blodpfx Aowx E Hmjdnsp
- 2 additional pairs of bolted lashing rings (LC 5,000 daN)
- Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel cable approx. 24 m long, cable Ø approx. 9.5 mm, incl. cable pressure roller
- 1 spare wheel with mounting adapter under the load deck, right side before the axles
- 9 pairs of recessed lashing rings along the central beam (LC 5,000 daN)
- 3 pairs in the lifting bed and 6 pairs in the rear section of the deck
- 1 stainless steel toolbox, approx. 620 x 300 /180 x 950 mm, left and right under the load deck
- WABCO Smart Board System
- 1st axle with starting aid
- 1 reversing spotlight each left and right at the rear of the vehicle
- 4 extendable warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, including 2 position lights and mounts for rotating beacon

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.