Tristrani prekucnik

MAN TGS 26:480 6x4 EURO5 ATLAS 240.2E-A4 3-S-Kipper

WhatsApp

MAN TGS 26.480 6x4 BB DF SCHWARZMÜLLER Three-way Tipper with Detachable
CRANE: ATLAS 240.2E-A4 RADIO REMOTE CONTROL
German vehicle, first owner

Equipment:
ZF 16-speed manual gearbox with INTARDER

Special Equipment:
- Car phone antenna
- Driver’s seat: Comfort, air-suspended and heated, with lumbar support and shoulder adjustment
- Flame start system
- 16-speed gearbox – Type: ZF 16S2310
- Fuel tank: Aluminum – 400 L diesel
- 60 L AdBlue tank
- 1-cylinder air compressor, 360ccm with Air Pressure Management (APM)
- Heated air dryer
- Retarder/INTARDER
- Exterior sun visor
- Radio
- Cabin power sockets: 12V and 24V
- Axle configuration: 6x4
- Starting/front mirror
- Trailer socket: 24V/7-pin
- Trailer socket: ABS
- Traction control system (ASR)
- Audio system: MAN Media Truck Advanced radio 12V, navigation system prep
- Electric & heated exterior mirrors, wide-angle heated mirror
- On-board computer: MAN-Tronic
- Kerb mirror, right side
- Rear axle differential lock
- Electronic brake system: MAN-Brakematic
- EURO 6 engine
- Suspension: Leaf/Air
- Electric windows
- Tinted windshield
- Alternator: 28V 80A
- Automatic climate control
- Multifunction steering wheel
- Raised air intake
- Engine: 12.4 liter, 353 kW diesel
- Engine compartment encapsulation
- Tinted rear side windows
- Seat upholstery: comfort quality
- Sun roller blind: side window + driver’s door
- Rear axle stabilizer
- Front axle stabilizer
- Viscous fan
- Beacon lights
- Power take-off NH/1C
- Intarder
- Builders step package
- Rear axle differential lock
- MAN Brakematic electronic brake system
- Cab: M (medium length)
Bcodswtkipspfx Af Aow

ATLAS CRANE Type 240.2E-A4
1.93m = 11.20t
4.51m = 4.78t
6.41m = 3.22t
8.31m = 2.4t
10.31m = 1.88t
12.31m = 1.56t
14.30m = 1.26t
Radio remote control
Detachable console Palfinger
Raised operator seat with radio holder

SCHWARZMÜLLER Three-way Tipping Body
Dimensions:
Internal length: approx. 6,300 mm
Internal width: approx. 2,420 mm
Total width: 2,550 mm
Auxiliary frame:
Continuous longitudinal beams with tipping cylinder bearing and tipping arms
Low body height: approx. 440 mm
Removable tipper locking with cross-protection
Body support and sound insulation
Reinforced subframe and end plate for Atlas 240.2E-A4 crane, detachable rear section,
Welding of both supplied mounting plates for detachable rear, without crane body
High-pressure hydraulic tipping system
20-ton tipping cylinder for three-way dumping,
with safety cable
Tipping angle to the rear: approx. 40 degrees
Load-sensing pump installation
Oil tank installation (from crane supplier)
Pneumatic tipping valve with overpressure valve
Pneumatic three-way changeover valve for tipper crane
2-pipe trailer tipper connection with pneumatic three-way changeover valve, including DN16 fittings
Tipper platform:
All-steel welded construction with 5 mm fine-grain stainless steel floor plate
10 pairs of rotating lashing rings, spaced: first pair approx. 400 mm from the front wall,
approx. 600 mm apart (distance between lashing rings 2,320 mm).
Lashing rods with straps on both sides under the tipping bed
Fixed front wall: 4 mm steel, approx. 980 mm high
Cab guard mesh with mountable lashing rings
2 steps on outer front wall (left) for access to cab
2 steps on inner front wall (left)
Continuous, one-piece sidewalls made from reinforced aluminium hollow profile (60/4/3 mm), approx. 980 mm high

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.