Polpriklopnik kiper

PRIMETZHOFER 1-A Lenksattel AluKippmu 4,25t 17m3

PRIMETZHOFER 1-axle aluminium rear-tipping steering semi-trailer
German vehicle, one owner
Excellent condition, new technical inspection (TÜV)!
22,210 kg payload!
In combination with 3-axle tractor unit (SZM) = 36,000 kg GVW!
Depending on tractor unit (SZM) up to approx. 24 tons payload!

Tractor Unit Information:
3-axle 6x4, fifth wheel coupling height unladen: 1,300 mm
Internal deck dimensions approx. 6,000/2,420/1,150 mm (LxWxH)

Chassis
Naxtra steel frame welded construction
Loading height unladen approx. 500 mm above fifth wheel coupling

Running Gear
Air suspension with automatic ride height control
Air suspension bellows Ø 360 mm
"BPW" air-suspended steering axle with stub axle and electro-hydraulic rear steering, 12 tons axle load at 80 km/h, S-cam brakes 420/200 mm, asbestos-free brake pads, AGS, with wear indicator, wheel connection centralized

Steering
Electro-hydraulic steering via electro-hydraulic unit with tracking/rear steering via cable remote control, power supply via NATO socket, steering lock with automatic disengagement

Tyres:
2 x 445/65 R22.5 168K
Fsdpewikw Sefx Acwopp
2 steel rims 13.00 x 22.5, 10-hole, factory silver

Support Equipment
2 insert tubes (outer dimensions 100 x 100 mm) and rectangular tube support feet for parking the empty vehicle

Brake System
EC two-line brake system, rated for 12-ton axle load
Spring-loaded parking brake
EBS – electronic braking system (Wabco 2S2M)
Aluminium air tanks
1 safety cable
Adjustable rear underrun protection
Rigid tipping shaft with 2 greaseable tipping bearings, rubber pads for noise damping
Brake/light connections: EBS/15-pin
Brake connection: red and yellow coupling heads
Lighting system 24 volts, in accordance with EC regulations
Multi-chamber tail lights, including fog/reversing lights & triangular reflectors
Side marker lights, number plate lights at rear
Rubber neck contour lights front & rear
2 x reversing lights
Plastic quarter mudguards with cover plate
Wheel chock with holder
Mount for shovel/broom/rake at front
Tow hook at rear of frame
Hydraulic connection hose
Screw coupling Edbro 1"
HYVA high-pressure front-lift cylinder, 250 bar, 51° tipping angle
Aluminium tipper body 6,000 mm x 2,420 mm x 1,150 mm (with rear tailgate at 17° with chute)

Volume approx. 16.7 m³
Body floor: 8 mm aluminium plate, grade H34 HB110
Aluminium front wall, 17° inclined, with reinforced upper chord and mounting brackets for front-lift cylinder
Body sides made of 40/4/2 mm aluminium hollow profiles with internal aluminium upper chord profiles
Overlapping aluminium pendulum tailgate, 17° inclined, with chute incl. additional manual latches
Simple pendulum bearing on tailgate
Automatic 2-hook rear wall locking with return spring and additional manual spring-bolt lock
Cross-member on upper chord
PVC roll tarpaulin, 900 g/m³ quality, fixed FR RIGHT inc. lateral lashing
Aluminium round tube, incl. lock on front wall

Paintwork
Steel shot blasting, zinc dust primer and sprayed with 2-component commercial vehicle acrylic paint
RAL3002 RED: chassis, underrun protection, tipper body, front wall, posts, and discharge chute, side and rear walls
Plastic and powder-coated attachment/fitting parts: black

Rear marking plate ECE70
Condition: GOOD considering age and mileage
All details without guarantee!

PLEASE NOTE: PRICE IS NET PLUS VAT

German, English: JOSEF
WhatsApp:

We speak the following languages: German, Czech, Polish, Romanian, Russian, English.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.