Polpriklopnik kiper

SCHWARZMÜLLER 3-Achs SK Stahl Kippmulde Segmentmulde 27,5m³

Schwarzmüller 3-Axle Steel HARDOX Tipping Semi-Trailer – Segment Shaped Body 27.5m³

Naxtra steel frame welded construction, weight-optimized lightweight design

HARDOX body

Capacity: 27.5 m³
Payload: 29,710 kg
1st axle liftable
Nsdpfsv T Enuex Ab Uolk
Roll tarpaulin (with holes)
4x rear work lamps
Tyres: 385/65R22.5 steel rims
Interchangeable 2" kingpin
Tread depth, right front: 9.41 mm
Tread depth, right middle: 8.45 mm
Tread depth, right rear: 4.71 mm
Tread depth, left front: 9.6 mm
Tread depth, left middle: 11.09 mm
Tread depth, left rear: 4.81 mm

Chassis:
Air suspension with automatic lowering via inductive switch and lowering lock via rotary switch on the semi-trailer. Additional lift/lower system. Automatic ride height adjustment above 15 km/h (RTR). BPW axles, BPW "EcoDisc" air suspension unit with low maintenance 430mm disc brakes – Off-road version, 3x9t rigid axles, axle spacing 2x 1,310mm. First axle automatically liftable: raises and lowers depending on weight, with forced lowering including integrated, speed-limited traction aid (Traction Help Plus).

Landing Gear:
2 aluminium drop-leg supports, height adjustable, unpainted.

Braking System:
Two-line brake system
Spring-loaded parking brake
EBS electronic braking system
Wabco 2S2M = one axle monitored
RSS – Electronic stability program
Steel air tanks

Tipping Gear:
1 low-pressure front cylinder for rear tipping
Tip angle approx. 45 degrees
Single pipe system with screw coupling DN20

Tipper Body:
Hardox steel body, semi-circular segment design with reinforced upper edge
Floor thickness: 5mm
Wall thickness: 4mm
Front and rear walls angled
Upper edge flush all around for tarpaulin cover
External rear wall: pendulum tailgate with recessed hinges and automatic mechanical 2-hook central locking
No discharge chute
Steel standing platform with aluminium non-slip grating, safety railing and access ladder, mounted on chassis frame

Roll Tarpaulin:
Plastic roll cover including aluminium bar and hand crank, without customs sealing
Tarpaulin colour: silver similar to RAL 9006
Retainer for rolled-up tarpaulin on front right
Right side with straight tarpaulin bar rope tensioning front to back; rear: zig-zag lacing
Left side with 3 tensioning straps (incl. rubber pads & tension locks under body)
1 removable cross brace, right-side stop bar for tarpaulin

Electrical Equipment:
24V lighting in accordance with EC directive 76/756/EEC
2 seven-chamber taillights
LED side marker lamps
2 position lights
2 outline marker lights
2x 7-pin and 1x 15-pin sockets

Paintwork:
Steel shot-blasted, zinc dust primed, and sprayed with 2-component commercial vehicle acrylic paint
RAL 7021 black grey = chassis
RAL 7001 silver grey = body
Plastic and hot-dip galvanized parts unpainted
Powder coated add-on parts black
Reflective side contour tape along the full length and rear surround (standard: white side and red rear), to ECE48
Rear marker to ECE standard

Accessories:
Wheel chocks
Noise dampers = rubber pads
Foldable aluminium trapezoidal underrun protection, unpainted
Single-wheel plastic mudguards with spray protection

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.