Prikolica z zamenljivo nadgradnjoWECON
4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Prikolica z zamenljivo nadgradnjo
WECON
4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Leto izdelave
2017
Stanje
Rabljeno
Lokacija
Furth im Wald 

Prikaži slike
Prikaži karto
Osnovni podatki
Cena in lokacija
- Lokacija prodajalca:
- Boehmerstrasse 12, 93437 Furth im Wald, Nemčija

Klic
Tehnične podrobnosti
- Največja dovoljena obremenitev:
- 13.200 kg
- Skupna masa:
- 16.000 kg
- Prva registracija:
- 06/2017
- Dolžina tovornega prostora:
- 7.040 mm
- Širina tovornega prostora:
- 2.480 mm
- Višina nakladalnega prostora:
- 2.200 mm
- Prostornina tovornega prostora:
- 38 m³
- Skupna širina:
- 2.550 mm
- Skupna višina:
- 2.450 mm
Podrobnosti ponudbe
- ID ponudbe:
- A187-59-296
- Št. reference:
- WECON_2017
- Nazadnje posodobljeno:
- dne 10.07.2025
Opis
WECON Curtainsider (Sliding Tarp Flatbed) BDF Swap Body
Model: Duke Type WPR 715 SG
Year of manufacture: 06/2017
German first ownership!
3 units WPR 715 SG with the following equipment:
WECON standard sliding curtain swap body Duke Type WPR 715 SG
External dimensions:
Body length: 7,150 mm
Body width: 2,550 mm
Internal dimensions:
Internal length: 7,040 mm
Internal width: 2,480 mm
Unladen weight: 2,590 kg
Gross vehicle weight rating: 16,000 kg
Internal height: 2,200 mm with sliding roof included
External height: 2,450 mm (corner height 2,450 mm = C 00)
Side loading height: 2,120 mm
Rear loading height: 2,165 mm
Forklift pockets at the rear in the floor frame
Reinforced zinc tubing version for mounting a truck-mounted forklift.
Bracket for chain securing required on the body.
--> Reinforced central tunnel variant restricts some functions.
Designed for continuous operation!
Floor frame: High-quality galvanized steel construction, height 215 mm, four ISO container corners on 20' basis, four gripper edges in accordance with EN 284, wheel recess 120 mm.
Flooring of swap body: Multi-bonded laminated floor, approximately 25 mm thick, drivable with forklift, suitable for axle loads up to 5,460 kg
Support legs: fixed, parking height 1,320 mm, galvanized version
15 pairs of lashing rings. Distribution: From front wall stanchion to center, first pair of lashing rings approx. 400 mm, then evenly distributed rest of the lashing rings
Knodpfx Asv Rtyasb Usf
Lashing rings, 1 pair, mounted on the inside stanchion of the bulkhead at 1,000 mm above floor level
Pallet stop edge, one-sided, 30 mm high, on left in direction of travel, standard tarp side.
Lashing options via elongated holes (approx. 15 x 30 mm), distance between holes approx. 200 mm.
Clearance height is reduced by 30 mm.
Front wall: smooth, bolted steel front wall, full height with cassette construction (cassettes galvanized)
Plywood panel on inside of front wall, 1,500 mm high, 12 mm thick
Front wall inside fitted with impact protection, 300 mm high galvanized steel sheet
Rear portal: double-leaf doors, smooth sandwich design, 4 internal locking bars, 4 hinges per door leaf.
Left side wall sliding curtain per DIN EN 12641-2: Quality 890 g/m², webbing grid 500 x 600 mm, tear strength vertical 24 kN, horizontal 13 kN. Stainless-steel buckle with pressure lock.
1 center stanchion, symmetrically positioned (left in direction of travel)
Each stanchion with 3 rows of slat pockets and 1 row of collection pockets (about 600 mm high) on the floor
8 aluminum insert slats, left in direction of travel, approx. 100 mm high
Wecon RAPIDO RIGHT: vertical steel profiles attached to the side curtain, guided in upper and lower tracks via rollers.
- Vertical curtain tensioners omitted
- Center stanchions omitted
- Horizontal insert slats omitted
Fixed tarpaulin roof as standard sliding roof, only locked in place.
Cover with parallel tracks, distance between tracks approx. 2,370 mm, distance from bottom edge of rail to bottom edge of bow approx. 90 mm
Coating: Floor frame and support legs hot-dip galvanized, superstructure parts dip-primed and
powder-coated in common RAL color,
Roof tarp: RAL 9010 (pure white)
Side curtain: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)
TÜV Certificate Code XL included
The certificate confirms the load securing effect provided by the body structure. In line with requirements
according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and E.
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Model: Duke Type WPR 715 SG
Year of manufacture: 06/2017
German first ownership!
3 units WPR 715 SG with the following equipment:
WECON standard sliding curtain swap body Duke Type WPR 715 SG
External dimensions:
Body length: 7,150 mm
Body width: 2,550 mm
Internal dimensions:
Internal length: 7,040 mm
Internal width: 2,480 mm
Unladen weight: 2,590 kg
Gross vehicle weight rating: 16,000 kg
Internal height: 2,200 mm with sliding roof included
External height: 2,450 mm (corner height 2,450 mm = C 00)
Side loading height: 2,120 mm
Rear loading height: 2,165 mm
Forklift pockets at the rear in the floor frame
Reinforced zinc tubing version for mounting a truck-mounted forklift.
Bracket for chain securing required on the body.
--> Reinforced central tunnel variant restricts some functions.
Designed for continuous operation!
Floor frame: High-quality galvanized steel construction, height 215 mm, four ISO container corners on 20' basis, four gripper edges in accordance with EN 284, wheel recess 120 mm.
Flooring of swap body: Multi-bonded laminated floor, approximately 25 mm thick, drivable with forklift, suitable for axle loads up to 5,460 kg
Support legs: fixed, parking height 1,320 mm, galvanized version
15 pairs of lashing rings. Distribution: From front wall stanchion to center, first pair of lashing rings approx. 400 mm, then evenly distributed rest of the lashing rings
Knodpfx Asv Rtyasb Usf
Lashing rings, 1 pair, mounted on the inside stanchion of the bulkhead at 1,000 mm above floor level
Pallet stop edge, one-sided, 30 mm high, on left in direction of travel, standard tarp side.
Lashing options via elongated holes (approx. 15 x 30 mm), distance between holes approx. 200 mm.
Clearance height is reduced by 30 mm.
Front wall: smooth, bolted steel front wall, full height with cassette construction (cassettes galvanized)
Plywood panel on inside of front wall, 1,500 mm high, 12 mm thick
Front wall inside fitted with impact protection, 300 mm high galvanized steel sheet
Rear portal: double-leaf doors, smooth sandwich design, 4 internal locking bars, 4 hinges per door leaf.
Left side wall sliding curtain per DIN EN 12641-2: Quality 890 g/m², webbing grid 500 x 600 mm, tear strength vertical 24 kN, horizontal 13 kN. Stainless-steel buckle with pressure lock.
1 center stanchion, symmetrically positioned (left in direction of travel)
Each stanchion with 3 rows of slat pockets and 1 row of collection pockets (about 600 mm high) on the floor
8 aluminum insert slats, left in direction of travel, approx. 100 mm high
Wecon RAPIDO RIGHT: vertical steel profiles attached to the side curtain, guided in upper and lower tracks via rollers.
- Vertical curtain tensioners omitted
- Center stanchions omitted
- Horizontal insert slats omitted
Fixed tarpaulin roof as standard sliding roof, only locked in place.
Cover with parallel tracks, distance between tracks approx. 2,370 mm, distance from bottom edge of rail to bottom edge of bow approx. 90 mm
Coating: Floor frame and support legs hot-dip galvanized, superstructure parts dip-primed and
powder-coated in common RAL color,
Roof tarp: RAL 9010 (pure white)
Side curtain: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)
TÜV Certificate Code XL included
The certificate confirms the load securing effect provided by the body structure. In line with requirements
according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and E.
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2005
Pošlji zahtevo
Telefon & Faks
+49 9973 ... oglasi
Ti oglasi bi vas prav tako lahko zanimali.
Mali oglas
Furth im Wald
387 km
Prikolica z zamenljivo nadgradnjo
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Mali oglas
Freiburg im Breisgau
581 km
Zamenjava karoserije / ponjave
KögelSwap
KögelSwap
Mali oglas
Furth im Wald
387 km
Prikolica z zamenljivo nadgradnjo
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Mali oglas
Oelde
802 km
Platforma za zamenjavo telesa
KroneGroße Auswahl an Wechselbrücken
KroneGroße Auswahl an Wechselbrücken
Mali oglas
Neufahrn bei Freising
349 km
Tovornjak z ravnim naslonom in ponjavo
VolvoFH 460 , Komplettzug
VolvoFH 460 , Komplettzug
Mali oglas
Legden
847 km
Kamion z zamenljivo nadgradnjo
MERCEDES-BENZActros MP3 2544 Euro 5 Retarder Voll Luft
MERCEDES-BENZActros MP3 2544 Euro 5 Retarder Voll Luft
Mali oglas
Eugendorf
238 km
Kamion z zamenljivo nadgradnjo
eActros 400 L
eActros 400 L
Mali oglas
Oelde
802 km
Zamenjava karoserije / ponjave
KroneGroße Auswahl an Wechselbrücken
KroneGroße Auswahl an Wechselbrücken
Mali oglas
Radeburg
570 km
Kamion z zamenljivo nadgradnjo
DAFXF 480 FAN, BDF Multiwechsler Mildner-Coming soon
DAFXF 480 FAN, BDF Multiwechsler Mildner-Coming soon
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake


























































































































































































