Nizki nakladalnik

Ozgul LW3 EU FIX

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further Options and Accessories = Crodpfsxgq Agjx Af Esh - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Pay Load (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra durable BOX-type chassis. All-welded S355 steel chassis. Outer frame made from UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automated robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12-ton axles. Axle Lifting: 1st axle, automatic lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single position with 1x coupling pin, 2'' (EU approved), Çayırova brand. Tyres: 12+1 units, 245 / 70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC Directive, ADR adapted. Brake Chambers: - 1st axle: 2 emergency brake chambers. - 2nd axle: 4 service brake chambers. Electrical System: 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR adapted, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Number plate lights • 2 x Rotating beacons Floor: Chequered plate and hardwood above wheel arches and on edges; flat sheet steel in the centre. Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump, remote control with cable push-button. Rear ramps: 2,500 mm + 1,500 mm, width: 900 mm, fully sliding inside and outside hydraulic system. Short steel ramps behind the gooseneck. Color: On request Paint Finish: Sandblasting, chemical cleaning, HYZINC coating, epoxy coating and two layers of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty lashing rings affixed to the outer frame (mushroom type) • 4 x Certified spray suppression mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanised side extension brackets (250 mm + 250 mm) • 2 x Aluminium side guards • 1 x Toolbox • 1 x Spare wheel carrier with 1 tyre (mounted on gooseneck) • 2 x Manual rear support legs • Reflective tape and reflector markings on rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE marking: Yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Crjdpswuhl Rsfx Af Esh Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Pay Load (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra durable BOX-type chassis. All-welded S355 steel chassis. Outer frame made from UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automated robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12-ton axles. Axle Lifting: 1st axle, automatic lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single position with 1x coupling pin, 2'' (EU approved), Çayırova brand. Tyres: 12+1 units, 245 / 70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC Directive, ADR adapted. Brake Chambers: - 1st axle: 2 emergency brake chambers. - 2nd axle: 4 service brake chambers. Electrical System: 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR adapted, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Number plate lights • 2 x Rotating beacons Floor: Chequered plate and hardwood above wheel arches and on edges; flat sheet steel in the centre. Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump, remote control with cable push-button. Rear ramps: 2,500 mm + 1,500 mm, width: 900 mm, fully sliding inside and outside hydraulic system. Short steel ramps behind the gooseneck. Color: On request Paint Finish: Sandblasting, chemical cleaning, HYZINC coating, epoxy coating and two layers of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty lashing rings affixed to the outer frame (mushroom type) • 4 x Certified spray suppression mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanised side extension brackets (250 mm + 250 mm) • 2 x Aluminium side guards • 1 x Toolbox • 1 x Spare wheel carrier with 1 tyre (mounted on gooseneck) • 2 x Manual rear support legs • Reflective tape and reflector markings on rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE marking: Yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Pay Load (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra durable BOX-type chassis. All-welded S355 steel chassis. Outer frame made from UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automated robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12-ton axles. Axle Lifting: 1st axle, automatic lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single position with 1x coupling pin, 2'' (EU approved), Çayırova brand. Tyres: 12+1 units, 245 / 70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC Directive, ADR adapted. Brake Chambers: - 1st axle: 2 emergency brake chambers. - 2nd axle: 4 service brake chambers. Electrical System: 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR adapted, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Number plate lights • 2 x Rotating beacons Floor: Chequered plate and hardwood above wheel arches and on edges; flat sheet steel in the centre. Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump, remote control with cable push-button. Rear ramps: 2,500 mm + 1,500 mm, width: 900 mm, fully sliding inside and outside hydraulic system. Short steel ramps behind the gooseneck. Color: On request Paint Finish: Sandblasting, chemical cleaning, HYZINC coating, epoxy coating and two layers of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty lashing rings affixed to the outer frame (mushroom type) • 4 x Certified spray suppression mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanised side extension brackets (250 mm + 250 mm) • 2 x Aluminium side guards • 1 x Toolbox • 1 x Spare wheel carrier with 1 tyre (mounted on gooseneck) • 2 x Manual rear support legs • Reflective tape and reflector markings on rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate holder on rear ramps or bumper Csdpfxewkyddj Af Ejrh = Further Information = Unladen weight: 12,300 kg CE marking: Yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Pay Load (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra durable BOX-type chassis. All-welded S355 steel chassis. Outer frame made from UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automated robotic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12-ton axles. Axle Lifting: 1st axle, automatic lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single position with 1x coupling pin, 2'' (EU approved), Çayırova brand. Tyres: 12+1 units, 245 / 70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC Directive, ADR adapted. Brake Chambers: - 1st axle: 2 emergency brake chambers. - 2nd axle: 4 service brake chambers. Electrical System: 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR adapted, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Number plate lights • 2 x Rotating beacons Floor: Chequered plate and hardwood above wheel arches and on edges; flat sheet steel in the centre. Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump, remote control with cable push-button. Rear ramps: 2,500 mm + 1,500 mm, width: 900 mm, fully sliding inside and outside hydraulic system. Short steel ramps behind the gooseneck. Color: On request Paint Finish: Crjdpjvg Hzpjfx Af Esh Sandblasting, chemical cleaning, HYZINC coating, epoxy coating and two layers of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty lashing rings affixed to the outer frame (mushroom type) • 4 x Certified spray suppression mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanised side extension brackets (250 mm + 250 mm) • 2 x Aluminium side guards • 1 x Toolbox • 1 x Spare wheel carrier with 1 tyre (mounted on gooseneck) • 2 x Manual rear support legs • Reflective tape and reflector markings on rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 number plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE marking: Yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Axle Group Weight (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Pay Load (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis Heavy duty and specially reinforced box-type chassis, fully welded S355 steel chassis. Outer frame is UPE 240 profile. Chassis Welding: Automatic arc submerged welding. Superstructure Welding: Automatic robotic welding. Axles (Type): Özkoç Trax or Osman Koç, Turkish brand, drum brakes, 3 x 12 ton axles. Axle Lift: 1st axle automatic. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single-position with 1x coupling pin, 2” (EU-approved), Çayırova brand. Tires: 12+1 units, 245/70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Csdpfx Afovg Hrze Eorh Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC directive, ADR compliant. Brake Chambers: 1st axle: 2 emergency brake chambers. 2nd axle: 4 service brake chambers. Electrical System: 24V, 2x7 + 1x15 pin sockets, SAE standard, ADR compliant, SABA brand. • 2 x Rear Stop Lights • 4 x Side LED Lights • 2 x White LED Lights • 2 x Front LED Lights • 2 x License Plate Lights • 2 x Warning Lights Floor: Over wheels and edges covered with chequered plate and hardwood, central surface covered with flat steel sheet. Rear Loading Ramps: Hydraulically operated rear ramps with electric pump, hydraulic functions controlled via cable remote. Rear ramps: length 2,500 mm + 1,500 mm, width 900 mm, fully sliding (internal and external), short steel ramps behind the gooseneck. Color: As requested Paint Finish: Sandblasted, chemical cleaning, HYZINC coating, epoxy primer, and two coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 heavy-duty lashing rings mounted on the outer frame, mushroom type • 4 x Certified Expray mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 Galvanized side extension brackets (250 mm + 250 mm) • 2 x Aluminium side underrun protections • 1 x Toolbox • 1 x Spare wheel carrier with 1 tire (mounted on gooseneck) • 2 x Manual support legs at the rear • 2 x Reflective strips and reflectors at rear and sides • 2 x Side marker reflectors • Steel front panel (height: 400 mm) • Aluminium side panels, gooseneck section (height: 400 mm) • 1 license plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE marking: yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra-durable BOX-type chassis, all-welded S355 steel chassis. Outer frame constructed from UPE 240 profile. Welding (Chassis): Automatic submerged arc welding. Welding (Superstructure): Robotic automatic welding. Axles (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles. Axle Lifting: First axle, automatic lift. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): Single position with 1x coupling pin, 2" (EU approved), Çayırova brand. Tyres: 12+1 units, 245/70 R 17.5, Fulda, Pirelli, or Goodyear. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC Directive and ADR adaptation. Brake Chambers: - 1st axle: 2 emergency brake chambers - 2nd axle: 4 service brake chambers Electric System: 24V, 2x7-pin + 1x15-pin sockets, SAE-standard with ADR adaptation, SABA brand. • 2 x rear stop lights • 4 x side LED lights • 2 x white LED lights • 2 x front LED lights • 2 x licence plate lights • 2 x rotating lights Floor: Above tyres and edges covered with chequered plate and hardwood; central section covered with flat sheet steel. Rear Loading Ramps: Hydraulic rear ramps with electro pump, remote-controlled via cable push button. Ramp length: 2,500 mm + 1,500 mm, width 900 mm. All ramps are hydraulically adjustable, sliding internally and externally. Short steel ramps behind the gooseneck. Colour: As requested Cjdpfx Afevg Hgxe Eerh Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy coating and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 heavy-duty lashing rings, mushroom type, mounted on outer frame • 4 x certified mud flaps (Expray) • 1 x plastic water tank • 2 x wheel chocks with holders • 2 x 7 galvanized side extension brackets, 250 mm + 250 mm • 2 x aluminium side guards • 1 x toolbox • 1 x spare wheel carrier with tyre (on gooseneck) • 2 x manual support legs at rear • 2 x reflective tapes and reflectors at rear and sides • 2 x side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 x plaque mount on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE marking: Yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Remarks = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty, extra-durable BOX-type chassis, fully welded S355 steel chassis. Outer frame made of UPE 240 profile. Chassis Welding: Automatic ARC submerged welding. Superstructure Welding: Automatic robotic welding. Axle (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12-ton axles Axle Lifting: 1st axle automatic Suspension (Type): Air suspension Steering Axles: – Kingpin (Type): 1 position with 1x coupling pin, 2" (EU approved), Çayırova brand Tires: 12+1 units, 245/70 R 17.5, Fulda, Pirelli or Goodyear brand Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand Landing Gear: Mechanically operated from one side, two speed, Gos brand Brake System: Wabco EBS (4S/3M) with RSS, compliant with EC Directive, with ADR adaptation Brake Chambers: - 1 axle with 2 emergency brake chambers - 2 axles with 4 service brake chambers Electrical System: 24V, 2x7 + 1x15 pin sockets according to SAE standard with ADR adaptation, SABA brand • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x License plate lights • 2 x Rotating lights Flooring Above the tires and platform edges: chequered plate and hardwood, center section covered with flat steel plate. Rear Loading Ramps Hydraulically operated rear ramps with electric pump for hydraulic ramp operation, cable push-button for remote control. Rear ramps: 2500 mm + 1500 mm, width 900 mm, all ramps sliding internally and externally hydraulic. Short steel ramps behind gooseneck. Color: On request Paint Application Sandblasting, chemical cleaning, HYZINC coating, epoxy coating and two coats of acrylic paint. Cjdpfx Afovg Hw Rs Eorh TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pcs heavy-duty lashing rings mounted on the outer frame, mushroom type • 4 x Certified Expray mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanized side extension brackets (250 mm + 250 mm) • 2 x Side guards, aluminum • 1 x Toolbox • 1 x Spare wheel holder with 1 spare tire (on gooseneck) • 2 x Manual support legs at the rear • 2 x Reflective tape and reflector at rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminum side panels on gooseneck section (height: 400 mm) • 1 space for license plate on rear ramps or bumper = Further Information = Curb weight: 12,300 kg CE marking: yes