Polpriklopnik z nizko nadgradnjo za prevoz gradbenih strojev

Lider lowbed 4 axles

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.000 kg, največja dovoljena obremenitev: 60.000 kg, velikost pnevmatike: 245 70R 17.5, Leto izdelave: 2026, Oprema: ABS, Lider prikolica za težko tovorne prikolice. Visokokakovostna in vzdržljiva izdelava EU standardi. Redpfju Unq Njx Abren EBS ali dvosistemski zavorni sistemi. Enoletna garancija na proizvodne napake Izdelano s plinskim varjenjem iz visoko odpornega jekla ST52 kot I-profil, po izračunih nosilnosti, z upoštevanjem preobremenitve in robotskim varjenjem. King Pin: Izdelan iz kovanega železa (42 cr Mo4), kar zagotavlja visoko natezno trdnost in odpornost proti lomu, v skladu z 2 kosoma 2’’ SAE/DIN standardov ter možnostjo enostavne zamenjave z vijačnimi povezavami. Višina king pina 1800 mm ali po meri glede na dimenzije vozila stranke. Zasnovano po evropskih standardih – uporabljeni so WABCO ali KNORR EBS ali ABS sistemi, opremljeni s samonastavljivimi zavorami (30-batne komore), zavorni bobni (394x210 mm), osne zavore. Vključeni sta dve zamenljivi zaščitni zavorni vtičnici. Zadnje osi: servisna/zasilna zavora 30x30 spodaj. Barva po želji stranke.

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2025, GVN prikolica s 3 osovine, ekskluzivni niskopodni model Rjdpfx Abjqxbcnerjn Za više informacija kontaktirajte nas.

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish Rsdpetx Nwnjfx Abrjn * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, 3-axle MULTIMAX *PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Gross weight: 49,500 kg Redpoizu Ntjfx Abron Fifth wheel load: 18,000 kg Axle load: 31,500 kg Neck length approx.: 3,900 mm Neck width approx.: 2,480 mm King pin steering radius to rear approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: * Loading platform width approx.: 2,540 mm Deck height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm *Gross weight depending on fifth wheel load: Yes Special permit required if country-specific regulations are exceeded. Technical description: Gooseneck: Gooseneck in SNT design for optimized load bed length, length approx. 3,900 mm, rear sloped approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Load platform: Load platform, length approx. 9,600 mm with rear slope approx. 900 mm x 6°. Section of platform after the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, length approx. 4,920 mm, width approx. 900 mm. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically adjustable sideways approx. 235 mm outward and approx. 365 mm inward. Maximum load and approach angle according to technical data sheet C470319. Maximum ramp angle with lowered load platform: 9°. Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift and lower valve. Axle tools included. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer at our discretion. Load index 143/141J (144/144F). Brake system: WABCO EBS-E braking system according to EU regulations. Without connection cable to tractor unit. Lighting: 24-volt lighting system "ASPÖCK-NORDIK full LED" version in accordance with EU regulations (ASS 3). Metallisation: Complete HRM metallisation (High Resistance Metallisation). Entire steel structure shot-blasted, then hot-finish coated with ZINACOR 850 (Zinc 85% - Alu 15%). 6-coat painting finish: Whole steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Final painting with 2 coats of two-component acrylic paint in a single RAL colour of choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special paint at extra charge. Steel construction: Made from high-tensile fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. Welding procedure: MAG according to EN ISO 4063. Shielding gas M21 according to EN ISO 14175. Front bulkhead made of steel, removable, approx. 400 mm high. Supply line junction box for tractor unit mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin assignment differs from the ISO standard, please inform us. Anderson socket at the front connection bar. (Rema 78051-00 & Amp. 150 V.) Cable for powering the electro-hydraulic unit and/or the electric cable winch (35 mm²,