Polpriklopnik z znižanim podom

Lider Lowbed 5 Axles

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option) Bcedpfx Aji Ai E Rsbrsu

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Bcjdpfxeuvbdto Abrju Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, skupna dolžina: 13.280 mm, skupna širina: 2.720 mm, velikost pnevmatike: 235/75 R17.5, medosna razdalja: 1.360 mm, barva: zelen, Leto izdelave: 1991, Barva: Zelená Užitečná hmotnost: 86 100 kg Podrobnosti Výrobce: Nooteboom Typ: MCO-74VV Číslo podvozku: L020048 Rok výroby: 1991 Hmotnosti Zatížení závěsu: 26 000 kg Zatížení nápravy: 13 750 kg na nápravu Celkové zatížení náprav: 82 500 kg Celková povolená hmotnost (GVW): 108 500 kg Provozní hmotnost: 22 400 kg Nosnost: 86 100 kg Nápravy Výrobce náprav: BPW Hydraulické odpružení Všechny nápravy zvedatelné Hydraulické řízení Brzdy Wabco s ABS Pneumatiky: 235/75 R17.5 Rozměry Délka: 13 285 mm Výsuv: 7 000 mm Max. celková délka: 20 285 mm Délka ložné plochy: 10 500 mm (+7 000 mm) Šířka ložné plochy: 2 720 mm Výška: 1 030 mm Rozvor: 1 360 mm Doplňující informace -Hatz Powerpack na hlavě husího krku Bjdpsuu Hk Aofx Abrjcu -Schránka na nářadí v hlavě husího krku -Kotvící oka -Mechanická podpěra -2x rezervní kolo + držák -Zadní nárazník se světly -King-pin 3,5" -Centrální mazání -Dálkové ovládání kabelem = Další informace = Obecné informace Rok výroby: 1991 Konfigurace náprav Rozměry pneumatik: 235/75 R17.5 Značka náprav: BPW Zadní náprava 1: Dvojmontáž; Zvedací náprava; Max. zatížení: 13 750 kg Zadní náprava 2: Dvojmontáž; Zvedací náprava; Max. zatížení: 13 750 kg; Řiditelná Zadní náprava 3: Dvojmontáž; Zvedací náprava; Max. zatížení: 13 750 kg; Řiditelná Zadní náprava 4: Dvojmontáž; Zvedací náprava; Max. zatížení: 13 750 kg; Řiditelná Zadní náprava 5: Dvojmontáž; Zvedací náprava; Max. zatížení: 13 750 kg; Řiditelná Zadní náprava 6: Dvojmontáž; Zvedací náprava; Max. zatížení: 13 750 kg; Řiditelná Hmotnosti Provozní hmotnost: 22 400 kg Užitečné zatížení: 86 100 kg Celková povolená hmotnost: 108 500 kg Funkční vlastnosti Výška ložné plochy: 103 cm Výsuvná nástavba: Ano Stav Technický stav: velmi dobrý Vizuální stav: velmi dobrý Finanční informace Cena: na vyžádání Další informace Pro více informací kontaktujte Stefana Schaapvelda.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 03/1991, skupna dolžina: 17.550 mm, skupna širina: 2.740 mm, vzmetenje: hidravlika, velikost pnevmatike: 235 / 75 R17.5 | load index 143/141J, medosna razdalja: 1.360 mm, barva: zelen, Leto izdelave: 1991, Farbe: Grün Nutzlast: 96.400 kg Hersteller: Nooteboom Typ: MCO-92VV Fahrgestellnummer: L020053 Baujahr: 27.03.1991 Gewichte: Sattellast: 26.400 kg Achslast: 12.100 kg Gesamte Achslast: 96.800 kg zulässiges Gesamtgewicht: 123.200 kg Leergewicht: 26.800 kg Zuladung: 96.400 kg Achsen: Achsenhersteller: BPW Hydraulische Federung Alle Achsen liftbar 1. Achse zwangsgelenkt 2. und 3. Achse starr Achsen 4 – 8 hydraulisch gelenkt Wabco-Bremsanlage mit ABS Reifengröße: 235/75 R17.5 | Tragfähigkeitsindex 143/141J Abmessungen: Länge: 17.550 mm Bjdpfx Abeuu Hkiorocu Ausziehbar: 7.000 mm Max. ausgezogene Länge: 24.550 mm Ladeflächenbreite: 2.740 mm / 3.240 mm Höhe: 950 mm Radstand: 1.360 mm Zusätzliche Ausstattung: Hatz Powerpack am Schwanenhals Zurrösen Rungentaschen Abstützungen zur Ladeflächenverbreiterung Mechanisches Stützfußsystem Reserverad mit Halter Arbeitsscheinwerfer Heckstoßstange mit Beleuchtung Sattelkupplung 3,5" Zentralschmieranlage Kabel-Fernbedienung = Weitere Informationen = Achskonfiguration: Reifengröße: 235/75 R17.5 | Tragfähigkeitsindex 143/141J Achsenfabrikat: BPW Federung: hydraulisch Hinterachse 1: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg, gelenkt Hinterachse 2: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg Hinterachse 3: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg Hinterachse 4: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg, gelenkt Hinterachse 5: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg, gelenkt Hinterachse 6: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg, gelenkt Hinterachse 7: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg, gelenkt Hinterachse 8: Zwillingsbereifung, Liftachse, max. Achslast 12.100 kg, gelenkt Gewichte: Leergewicht: 26.800 kg Zuladung: 96.400 kg zulässiges Gesamtgewicht: 123.200 kg Funktionalität: Ladeflächenhöhe: 95 cm ausziehbarer Aufbau: ja Zustand: Technisch: sehr gut Optisch: sehr gut Preis: Auf Anfrage Weitere Informationen erhalten Sie bei Stefan Schaapveld.

Stanje: novo, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 29.600 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front bogie: - Hook mountings at front and rear - Bogie length x width approx. 2,200 mm x 2,850 mm Excavator deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and pin-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm Bcsdpfx Aewcmhajbrsu - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear bogie: - Mechanical pin-lug coupling for the installation of a lowbed at the front, rear crossmember at the back - Bogie length x width approx. 5,480 mm x 2,850 mm - Multiple lashing points Pendulum axles and tyres (front and rear bogies): - "PENDULUM AXLE", all axles forced-steered via hydromechanics - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and locking clips for securing in raised position - Final coating on axles: 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres size 285/70 R19.5 Remote steering (after-steering): - Remote steering operable from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Socket for remote steering control on gooseneck - Cable remote control with pushbuttons and single-track control included Accessories included: - Yellow and red air couplings on the galvanised front connection bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at rear of gooseneck for warning boards - Hoisting jib with winch for spare wheel at the front face of the gooseneck - Truck hydraulic connection with flow control (40 l/min), including support jib for supply lines; tractor unit tank must have at least 80 litres capacity with couplings - Plug-in ALU side and rear boards on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun on gooseneck - BEKAMAX central lubrication system: 1x on gooseneck, 1x on 2-axle and 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and at lowbed hook interface - 2 spare wheels - One 7-pin socket left and right, at front and rear of rear bogie for warning boards - Front bogie with separate air connection for impact wrench - Foldable steel bed extensions, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel bed inserts can be placed in 2 positions for sunken load area - Steel mats with rubber flooring, approx. 12 mm thick - Thread-in options (⌀ 40 mm) every approx. 500 mm on the upper flange of the excavator deck outer tube for eye bolts - One locking point at every approx. 500 mm on extension with mechanical lock - Socket on rear bogie for remote steering cable control - 2 reversing lights on rear panel - Four extendable warning boards (by approx. 2,000 mm), each approx. 423 x 423 mm with position lights - 1 work light left + right on rear panel of gooseneck with separate on/off switches - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for after-steering

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 28.000 kg, največja dovoljena obremenitev: 200.000 kg, velikost pnevmatike: 235/70 17.5, Leto izdelave: 2026, model šasije: Lider Heavy-Duty Chassis, Oprema: ABS, Težko-prevozni nizkopodni polpriklopnik. Lider priklopnik za težke tovore. Visoka kakovost in trpežna izdelava. Bsdeu Unrajpfx Abrscu V skladu s standardi EU. EBS ali dvocevni zavorni sistemi. Enoletna garancija na proizvodne napake. Barva po želji kupca.